Jump to content
AVIC411.com

How do I see sky in 3D on FX3.1? Won't pan any further


Recommended Posts

I just installed the FX3.1 from the sticky above.

 

It seems I can only pan down towards street level (so I'm looking more towards the horizon) a few clicks. Not enough to see the sky or more than 2-3 streets ahead when at street name viewing level.

 

I looked in map settings and clicked all around smart zoom and saw no adjustable control for it.

 

What am I missing?

 

Thanks!

Link to post
Share on other sites

Sounds like you need to alter the sys.txt file, particularly the [map] section.

 

Here's what I have been using for well over a year with good results:

 

[map]

3d_max_tiltlevel=9000

3d_min_tiltlevel=5000

3d_zfar_horizon_ratio=200

3d_max_zfar=60

zoomfactor=105

tiltfactor=20

 

If you have some of these already and want to experiment with other values just put the new test value in front of the old value but with a semi-colon in front of the old value. An example is 3d_max_tiltlevel=9000 ;7500

with the ;7500 being the old value.

 

I particularly find the tiltfactor=20 very useful so the stepping does not jump in large increments. Play with that one to your liking.

 

Hope this helps.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...