dragon24 Posted November 1, 2010 Report Share Posted November 1, 2010 Here is the striped down version of the Avic X910 with update 3.010100. I also added some new mods to the basic install. This also has the WinCE file that was in the 3.010100 update. Please note that this does not have any MAPS, POI or DEM files. And alway back-up your files. This will work with your old MAPS, POI & DEM files. I added Direct Downloads to the files. This is now a full upgrade to 3.010100 & 2010 maps. Check out the Mods & Themes. Mods Added: 1. Skip Navi screen Warning Nag 2. Branded POI icons :UPDATED: 02-11-2010 3. Turn The Redlight/Speedcam Features On: Here or Here 4. Software mod "bypass" 5. XM August 2009 Logo Update 6. Testmode 2.3 7. Hacked EZRider & License 8. WINCEIMG: From 3.010100 update. Use if needed. Maps Needed: New 2010 TeleAtlas Maps, POI & Dem Files. Themes: Complete Mods & Themes If you dont have a back up of your unit start here first. Don't skip this step or you might be sorry later. First make a copy of your old My Flash Drive folder before you do anything. Make a Back-Up of your AVIC: 1. Copy just the Testmode folder to the root of your SD Card. This will boot the unit to the Wince menu. 2. Double Tap "My Device" 3. Copy the "My Flash Disk" to your "Storage Card' SD Card. 4. Copy files to your PC & burn a copy if you like. If you already have a copy of your "Flash Disk" start here. Extract the Winrar zip file to the root of a freshly formated FAT32 SD Card. WinCE Upgrade & 3.010100 update: 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each. F90BT: push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format (This will clean your flash memory. Thats why you made a Back Up copy.) 5. Wait until it says restart in the bottom center. Reset the unit and leave the SD card in. 6. You should be greeted with testmode (It will look very similar to normal windows). Open My Device and copy the contents of the "Storage Card/SD Card" to the root of "My Flash Disk" that is located on the unit. Overwrite everything. (It will the copying will take 140min but will only take about 20) 7. Press and hold reset for 5 seconds. 8. Select your language and voice options. 9. Enjoy FX3.3.010100 Thanks to Retell for the guide. Since the torrent seems to be dead. Here is a Direct Download to the file. Base X910Backup with 3.010100 Update File name: Avic X910 with update 3.010100.zip File size: 261.12 MB DEM File (Pick 1) File name: Canada_83_CGIAR_081020.rar File size: 29.60 MB File name: North_America_83_NASA_070919.rar File size: 167.88 MB File name: USA_83_CGIAR_081010.rar File size: 110.22 MB Maps & PIO's File name: Alabama.rar File size: 29.66 MB File name: Alaska.rar File size: 7.74 MB File name: Arizona.rar File size: 32.75 MB File name: Arkansas.rar File size: 22.65 MB File name: California.rar File size: 139.28 MB File name: Canada.7z File size: 127.53 MB File name: Colorado.rar File size: 31.40 MB File name: Connecticut.rar File size: 14.55 MB File name: Delaware.rar File size: 4.19 MB File name: District of Columbia.rar File size: 2.67 MB File name: Florida.rar File size: 84.38 MB File name: Georgia.rar File size: 48.40 MB File name: Hawaii.rar File size: 4.59 MB File name: Idaho.rar File size: 15.98 MB File name: Illinois.rar File size: 54.00 MB File name: Indiana.rar File size: 29.64 MB File name: Iowa.rar File size: 20.09 MB File name: Kansas.rar File size: 22.16 MB File name: Kentucky.rar File size: 24.47 MB File name: Louisiana.rar File size: 24.90 MB File name: Maine.rar File size: 9.85 MB File name: Maryland.rar File size: 22.35 MB File name: Massachusetts.rar File size: 26.18 MB File name: Mexico.7z File size: 42.08 MB File name: Michigan.rar File size: 45.33 MB File name: Minnesota.rar File size: 32.16 MB File name: Mississippi.rar File size: 20.33 MB File name: Missouri.rar File size: 36.44 MB File name: Montana.rar File size: 22.02 MB File name: Nebraska.rar File size: 15.45 MB File name: Nevada.rar File size: 17.41 MB File name: New Hampshire.rar File size: 7.73 MB File name: New Jersey.rar File size: 31.70 MB File name: New Mexico.rar File size: 20.11 MB File name: New York.rar File size: 70.49 MB File name: North Carolina.rar File size: 49.73 MB File name: North Dakota.rar File size: 10.92 MB File name: Ohio.rar File size: 49.31 MB File name: Oklahoma.rar File size: 23.76 MB File name: Oregon.rar File size: 31.63 MB File name: Pennsylvania.rar File size: 56.41 MB File name: Puerto Rico.rar File size: 6.17 MB File name: Rhode Island.rar File size: 4.29 MB File name: South Carolina.rar File size: 26.65 MB File name: South Dakota.rar File size: 12.15 MB File name: Tennessee.rar File size: 47.44 MB File name: Texas.rar File size: 126.83 MB File name: Utah.rar File size: 15.98 MB File name: Vermont.rar File size: 4.34 MB File name: Virgin Islands.rar File size: 364.86 KB File name: Virginia.rar File size: 37.65 MB File name: Washington.rar File size: 35.47 MB File name: Waters.rar File size: 20.67 KB File name: West Virginia.rar File size: 11.06 MB File name: Wisconsin.rar File size: 31.16 MB File name: Wyoming.rar File size: 14.31 MB Avic X910 with update 3.010100.rar Quote Link to post Share on other sites
wnclivin Posted November 17, 2010 Report Share Posted November 17, 2010 I get the message "Update failed" in red, bottom center. Haven't been able to get into testmode since the last tweak which applied 3.1, 2009.6 maps, nav warning screen disable. Any ideas to get around this? UPDATE: Used another card and was able to complete Update SD Format. Upon rebooting into the language selection, I get an error screen reading Fatal Error... and it gets stuck in a bootloop. Trying to track down the culprit. Quote Link to post Share on other sites
d00t Posted November 29, 2010 Report Share Posted November 29, 2010 Can someone seed this please? Quote Link to post Share on other sites
dorksandforks Posted November 30, 2010 Report Share Posted November 30, 2010 seed please! Quote Link to post Share on other sites
lucky Posted December 2, 2010 Report Share Posted December 2, 2010 seed please please please Quote Link to post Share on other sites
JeremyFXDWG Posted December 4, 2010 Report Share Posted December 4, 2010 Is the the latest and greatest update for the f90bt or is the pne in the thread for the FX3.1? That thread seems to have the later firmware 3.0201 JP Quote Link to post Share on other sites
lucky Posted December 8, 2010 Report Share Posted December 8, 2010 i can not get a seed on either just ignored Quote Link to post Share on other sites
Miller Man Posted December 8, 2010 Report Share Posted December 8, 2010 Just installed it on my F900bt. Didn't work properly cause I forgot to add maps, but thanks to the great instructions on this site, it is fixed! So far it looks really good, cheers! Quote Link to post Share on other sites
dragon24 Posted December 12, 2010 Author Report Share Posted December 12, 2010 i added direct download for the files so you dont have to worry about any seeder on the file. Quote Link to post Share on other sites
xlnewb Posted December 12, 2010 Report Share Posted December 12, 2010 Says it cant find the winceimg.cks file and freezes up once i get to step 4, help? D: Quote Link to post Share on other sites
dragon24 Posted December 12, 2010 Author Report Share Posted December 12, 2010 the wince files are located in the PLT folder. Quote Link to post Share on other sites
yyam85ahaz Posted December 13, 2010 Report Share Posted December 13, 2010 Sorry im new to all this. Basically just download the two update files that are two hundred something megabites a peice us maps, and system, load it into the S drive and plug into the front of the unit and follow the instructions on this post?. Are the mods at the top actually added onto the file or do i add them myself? I have the f90bt and any help would be greatly appreciated. DJ Quote Link to post Share on other sites
dragon24 Posted December 13, 2010 Author Report Share Posted December 13, 2010 All the mods are added already to the Base X910Backup with 3.010100 Update download. You only have to add the DEM & Map's you want. I have this update running on my F90BT. From what i understand from reading the avic411 the F & X series are all same base OS. Just make sure you make a copy of your unit before you start playing with it. Also if you want an up to date version CLICK HERE FOR 3.1 Quote Link to post Share on other sites
slightlyevolved Posted December 14, 2010 Report Share Posted December 14, 2010 I've loaded a FX3.1, even munged around with Abbs' 4.0; but I'm still learning some of the terminology here. So, here's the stupid question for the thread... Does this work on a F700 as well, or only the 900/90's? It always seems to me that they are the same firmware, just loads drivers for the DVD drive and MSN tuner on the 900/90BT. Quote Link to post Share on other sites
carguyphil Posted December 29, 2010 Report Share Posted December 29, 2010 Trying to do this on my F700. I made it through all of the steps no problem, but am running into a problem with the maps. Could someone clarify where the maps are supposed to go? I found them under the APL2 contents folder that has MAPS and POI. Do I need to download each of the 50 states and put them in this folder? Then where do the DEM map files go? I am hoping the reason my system shows the "please wait system starting" message is because I do not have the right maps... Would this make sense? Thanks! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.