pionara Posted February 14, 2013 Report Share Posted February 14, 2013 Does anyone know how to turn off the camera when the screen is stuck on the "caution, items may apprear reversed" ? I've tried to reset the system and the screen goes back to the "caution" error message. please dont double post and hijack threads Quote Link to post Share on other sites
piowoz22 Posted March 23, 2013 Report Share Posted March 23, 2013 Hi guys, I'm having the same issue as in the first post- avic won't boot and I can't enter service mode (blue screen). I have all files downloaded however can't figure out what to do. Could you help? Quote Link to post Share on other sites
asams124 Posted December 14, 2013 Report Share Posted December 14, 2013 same problem Quote Link to post Share on other sites
TenneT Posted February 2, 2014 Report Share Posted February 2, 2014 I'm also after some help please. F900bt was fine on the way to work yesterday, but when I started the car to come home the unit had a black screen. The button lights lit up for a few seconds and then went out. Today I tried reinstall the wince image etc. I can get into the service mode (holding buttons, release reset etc) and the unit reads the wince img on the SD card, but it won't write it. It gets to 100% read and then freezes. Is my unit unrepairable? Any help would be appreciated. Thanks. Quote Link to post Share on other sites
adf157 Posted February 28, 2014 Report Share Posted February 28, 2014 i got the blue screen...but continue to get: press reset button again! What should i do? Quote Link to post Share on other sites
dcapper Posted March 30, 2014 Report Share Posted March 30, 2014 I'm also after some help please. F900bt was fine on the way to work yesterday, but when I started the car to come home the unit had a black screen. The button lights lit up for a few seconds and then went out. Today I tried reinstall the wince image etc. I can get into the service mode (holding buttons, release reset etc) and the unit reads the wince img on the SD card, but it won't write it. It gets to 100% read and then freezes. Is my unit unrepairable? Any help would be appreciated. Thanks. Did you ever get it fixed? Mine is doing the same thing now. Quote Link to post Share on other sites
bryant864 Posted April 11, 2014 Report Share Posted April 11, 2014 same here Quote Link to post Share on other sites
Blackhawk74 Posted April 11, 2014 Report Share Posted April 11, 2014 Have u guys downloaded update files or have you bought on the internet (ebay)?? Quote Link to post Share on other sites
dcapper Posted April 12, 2014 Report Share Posted April 12, 2014 My motherboard died. Bought a new on on Ebay. Quote Link to post Share on other sites
tms.cristian Posted December 14, 2015 Report Share Posted December 14, 2015 Hi , I have same problem . I found that cable connection between AV and NAVI board (GGD1327) does not make good contact with 5V pin 9 . I managed to turn it on after I cleaned well to and now again goes in some cases. It must be a problem to another jack BETWEEN bords.... Helps me the service manual. Quote Link to post Share on other sites
tms.cristian Posted January 10, 2016 Report Share Posted January 10, 2016 i thing the problem is IC 610. M30878FJBGP A U3 810B2A2 (PEG446A). Quote Link to post Share on other sites
rmcsm Posted December 27, 2016 Report Share Posted December 27, 2016 hi, i've got the some problem as TenneT it freezes at 100% read, I turned it off, format sd card en put tetstmode, put it back in my f900bt but nothing happens it does not go into testmode Somebody help please.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.