dc5dy Posted April 12, 2011 Report Share Posted April 12, 2011 i just recently installed a AVH-P3200BT on my girlfriends 01 RAV4. put all the wirings together and went smooth. i also bypassed it by using a 40A 4-pin relay and it worked fine. now i installed the back-up camera and followed the steps RED-ACC and BLACK-GND and of course the RCA video plugged in the back of the HU then after doing that i put the gear on REVERSE "R" and it didn't work. anyone here having the same problem? thanks! Quote Link to post Share on other sites
rgarjr Posted April 12, 2011 Report Share Posted April 12, 2011 did you connect the reverse lamp wire? Quote Link to post Share on other sites
dc5dy Posted April 12, 2011 Author Report Share Posted April 12, 2011 did you connect the reverse lamp wire? yes.. purple wire from HU connected to positive of the reverse lamp and 2 wires of the camera RED connected to ACC from the HU and BLACK connected to the GROUND. Quote Link to post Share on other sites
rgarjr Posted April 12, 2011 Report Share Posted April 12, 2011 is the camera turned on in settings? Quote Link to post Share on other sites
dc5dy Posted April 12, 2011 Author Report Share Posted April 12, 2011 is the camera turned on in settings? what do you mean by that? i have Audiovox ACA200W Quote Link to post Share on other sites
dc5dy Posted April 12, 2011 Author Report Share Posted April 12, 2011 i have a AVIC-D3 on my RSX bypassed both nav & dvd feature... and i have Audiovox CMOLF and its working fine everytime i put my gear on REVERSE. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.