Jump to content
AVIC411.com

Condi's HACKMODE v2.2 - AUTOINSTALL! working also with F40BT, X940BT etc! [updated: 27.09.2012]


Recommended Posts

Hmm Z130BT copy :)

Is this means that you tested HACKMODE on this model?

 

 

 

I think that I know why you have problems to jump into normal software.

It can be caused by z110-to-z120 upgrade. I think that your PRG1 is from

old firmware. You should try to:

1) make another copy of your backup PRG0 directory,

2) rename unmodified copy of PRG0 to PRG1,

3) delete PRG1 from the avic,

4) copy prepared PRG1 to avic (should be with same content as PRG0),

5) delete from PRG0 Av1.exe, Av.mscr, and copy the old HACKMODE files.

 

Please post the results.

 

Br

Condi

 

Done

 

i delete all files into pr1 folder

a copy all pr0 into , its work!!

you are right , maybe my pr1 files are z110bt orignal files! Good Work again!

 

Now we need focus in get a better way to alternate into original pioneer and Windows ce

and get a fully function Windows.

Link to post
Share on other sites
  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

I have the z110 upgraded to the z120. I deleted av.exe from prg0 and copied in your files but when i stick in the sd with the hackmode.key it wont boot into hackmode just normal mode. radio still works just like it supposed to but no hackmode. Does it have something to do with the fact i have prg0 and prg1? Help me get this thing hacked!

Link to post
Share on other sites

I have the z110 upgraded to the z120. I deleted av.exe from prg0 and copied in your files but when i stick in the sd with the hackmode.key it wont boot into hackmode just normal mode. radio still works just like it supposed to but no hackmode. Does it have something to do with the fact i have prg0 and prg1? Help me get this thing hacked!

 

are u using Hackfile from condi´s first post? or hack_test from another post

 

I have the some unit upgraded and i folow the instructions and works , my only problem ,has solved after, is returm to normal mode, try confirm the size of av.exe in pr0 = 8k and if u have all files in prg0 folder, the files on prg0 and prg1 are the same before the hack??

Link to post
Share on other sites

are u using Hackfile from condi´s first post? or hack_test from another post

 

I have the some unit upgraded and i folow the instructions and works , my only problem ,has solved after, is returm to normal mode, try confirm the size of av.exe in pr0 = 8k and if u have all files in prg0 folder, the files on prg0 and prg1 are the same before the hack??

Yes using the hack file from the first post. it looks like both prg0 and prg01 are identical. Didnt go through it all but same number of files and all the same size. should i copy everything back the way it was and try again?

Link to post
Share on other sites

Hello Condi!

I also confirm this working on F920BT.

I'm really interested if it's possible to update the maps, or change the navi software alltogether. Will have to play around a bit.

Thanks so much for your hard work.

 

Thanks for posting results :)

 

Yes using the hack file from the first post. it looks like both prg0 and prg01 are identical. Didnt go through it all but same number of files and all the same size. should i copy everything back the way it was and try again?

 

Yes, revert it back. Then for first delete Av.exe from PRG0, and after that copy hackfiles (to PRG0 only).

PRG1 shouldnt be touched.

Link to post
Share on other sites

Ok deleted prg1 and replaced it with prg0 renamed prg1. still does not boot up in hack mode. What was the note about deleting av.mscr and rplacing it with the condihack av.mscr? Is this my problem?

 

No no, it was a test, wrong test, forget it ;)

You just do something wrong :>

 

/USER/PRG0/Apl/Av.exe <-- stock exe, delete.

then copy:
/USER/PRG0/Apl/Av.exe
/USER/PRG0/Apl/Av.mscr
/USER/PRG0/Apl/MortScript.exe
/USER/PRG0/Apl/cecmd.exe
/USER/PRG0/Apl/Restart.exe

/SDMMC/HACKMODE.KEY

 

<--- this is how it should be, correct path for copied hackfiles.

Check if everything is in correct place.

Link to post
Share on other sites

No no, it was a test, wrong test, forget it ;)

You just do something wrong :>

 

/USER/PRG0/Apl/Av.exe <-- stock exe, delete.

then copy:
/USER/PRG0/Apl/Av.exe
/USER/PRG0/Apl/Av.mscr
/USER/PRG0/Apl/MortScript.exe
/USER/PRG0/Apl/cecmd.exe
/USER/PRG0/Apl/Restart.exe

/SDMMC/HACKMODE.KEY

 

<--- this is how it should be, correct path for copied hackfiles.

Check if everything is in correct place.

 

 

Im gonna copy the original prg0 back on to the avic. after i do that go to user/prg0/apl and delete av.exe that is all correct? Thjen copy the five files in your hack folder to user/prg0/apl correct?

Link to post
Share on other sites

Im gonna copy the original prg0 back on to the avic. after i do that go to user/prg0/apl and delete av.exe that is all correct? Thjen copy the five files in your hack folder to user/prg0/apl correct?

Yep exactly :)

And also remember about HACKMODE.KEY file in root of your SD

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...