pionara Posted December 11, 2011 Report Share Posted December 11, 2011 another idea would be to boot into the u310bt version of APL take 2.001 application from QI_037_CNSD_130FM and put it on your flash under the alternate application dir (PRG1) and set application flag (PRG.FLG) in My Flash Disk to get it to boot from PRG1 instead of PRG0. Can you see if it still does this... Sadly, I just did a very stupid thing this morning... I was hooking up the head unit to my bench powersupply and was moving it with the power applied and shorted something:(( Anyhow i managed to blow the fuse.. But i think it may be damaged beyond that ( Quote Link to post Share on other sites
Somniac Posted December 11, 2011 Report Share Posted December 11, 2011 another idea would be to boot into the u310bt version of APL take 2.001 application from QI_037_CNSD_130FM and put it on your flash under the alternate application dir (PRG1) and set application flag (PRG.FLG) in My Flash Disk to get it to boot from PRG1 instead of PRG0. Can you see if it still does this... Sadly, I just did a very stupid thing this morning... I was hooking up the head unit to my bench powersupply and was moving it with the power applied and shorted something:(( Anyhow i managed to blow the fuse.. But i think it may be damaged beyond that ( Sorry to hear about your power incident, I hope your unit survived OK. I'll continue to play with the .enc and .pwd files in different combinations. The pwd file is obviously specific to the model or device as my VirtualClock one is different to yours but the .enc is the same. I've attached my original F230BT appslib.dll file and the one I hacked. Appslib.rar Quote Link to post Share on other sites
pionara Posted December 12, 2011 Report Share Posted December 12, 2011 damn.. i took apart the unit.. smelly. i cooked something. looks like the PAL007C, which i think is the audio amp IC... I think my leads slipped off and the PKB gnd shorted one of the speaker leads. Even after correcting, and switching on power, it smoked more and blew the 10A fuse. So this chip is cooked. Partially good news is that it's only about 11 bucks on ebay. What I'm really afraid of with this kind of short resulting current flow, I may have taken other stuff out on the board which I wouldn't know about (((( (triple-unhappy-face). Anyhow, I guess i have to fork over the 14 bucks to and do some solder work to find out if this thing is salvageable... DAMN! Quote Link to post Share on other sites
street656 Posted December 12, 2011 Report Share Posted December 12, 2011 Has any progress been made in getting the native apps, like video player, to work? Quote Link to post Share on other sites
djpaso Posted December 26, 2011 Report Share Posted December 26, 2011 How to change the splash screen? Quote Link to post Share on other sites
dvel85 Posted December 26, 2011 Report Share Posted December 26, 2011 djpaso read here http://avic411.com/index.php?/topic/25768-changing-the-splash-screen/ Quote Link to post Share on other sites
basketthis Posted January 9, 2012 Report Share Posted January 9, 2012 I wasn't able to get the update to work after following the instructions in here or the one's from the other post. I decided to delete the My Flash folder while in testmode and managed to get to the aplupdate program and run it. The unit restarts and shows a blue screen that displays "Updating Image...". The image never changes or updates. I think I have done something permanent to mess up my unit. Please help if anyone can! Quote Link to post Share on other sites
pamartin Posted March 18, 2012 Report Share Posted March 18, 2012 how do I boot up my 310bt into the original mode after have test mode done? Quote Link to post Share on other sites
onnaj Posted March 19, 2012 Report Share Posted March 19, 2012 Boot the device and during boot remove the sdcard. Quote Link to post Share on other sites
pionara Posted March 19, 2012 Report Share Posted March 19, 2012 or rename the TESTMODE folder, to something like TESTMODE1 unit will not boot into test mode Quote Link to post Share on other sites
JackTheRipper Posted June 30, 2012 Report Share Posted June 30, 2012 I managed to update from 310 to 320, I can see the applications on new menu but when I enter them I can see: App mode, press restart and app will work with next booting??? I've tried all lib files and no success so far. Any clues? Quote Link to post Share on other sites
carlo80 Posted March 25, 2015 Report Share Posted March 25, 2015 Hello guys, I put files from TESTMODE_BY_CHARLIE to root folder of MsSD card and pushed reset on front panel.... but nothing happens ... What did I wrong ? I have f320bt ver.1.00 .... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.