Jump to content


Photo

F310BT hack is real


  • Please log in to reply
116 replies to this topic

#106 pionara

pionara

    Member

  • Members
  • 780 posts

Posted 11 December 2011 - 04:20 PM

another idea would be to boot into the u310bt version of APL
take 2.001 application from QI_037_CNSD_130FM and put it on your flash under the alternate application dir (PRG1) and set application flag (PRG.FLG) in My Flash Disk to get it to boot from PRG1 instead of PRG0. Can you see if it still does this...
Sadly, I just did a very stupid thing this morning... I was hooking up the head unit to my bench powersupply and was moving it with the power applied and shorted something:((
Anyhow i managed to blow the fuse.. But i think it may be damaged beyond that :((

#107 Somniac

Somniac

    Member

  • Members
  • 22 posts

Posted 11 December 2011 - 05:25 PM

another idea would be to boot into the u310bt version of APL
take 2.001 application from QI_037_CNSD_130FM and put it on your flash under the alternate application dir (PRG1) and set application flag (PRG.FLG) in My Flash Disk to get it to boot from PRG1 instead of PRG0. Can you see if it still does this...
Sadly, I just did a very stupid thing this morning... I was hooking up the head unit to my bench powersupply and was moving it with the power applied and shorted something:((
Anyhow i managed to blow the fuse.. But i think it may be damaged beyond that :((


Sorry to hear about your power incident, I hope your unit survived OK.
I'll continue to play with the .enc and .pwd files in different combinations. The pwd file is obviously specific to the model or device as my VirtualClock one is different to yours but the .enc is the same.

I've attached my original F230BT appslib.dll file and the one I hacked.

Attached Files



#108 pionara

pionara

    Member

  • Members
  • 780 posts

Posted 12 December 2011 - 12:59 AM

damn.. i took apart the unit.. smelly. i cooked something. looks like the PAL007C, which i think is the audio amp IC... I think my leads slipped off and the PKB gnd shorted one of the speaker leads. Even after correcting, and switching on power, it smoked more and blew the 10A fuse. So this chip is cooked. Partially good news is that it's only about 11 bucks on ebay. What I'm really afraid of with this kind of short resulting current flow, I may have taken other stuff out on the board which I wouldn't know about :((((( (triple-unhappy-face).
Anyhow, I guess i have to fork over the 14 bucks to and do some solder work to find out if this thing is salvageable... DAMN!

#109 street656

street656
  • Members
  • 4 posts

Posted 12 December 2011 - 04:35 AM

Has any progress been made in getting the native apps, like video player, to work?

#110 djpaso

djpaso
  • Members
  • 3 posts

Posted 26 December 2011 - 01:16 PM

How to change the splash screen?

#111 dvel85

dvel85
  • Members
  • 11 posts

Posted 26 December 2011 - 04:13 PM

djpaso read here http://avic411.com/i...-splash-screen/

#112 basketthis

basketthis

    Member

  • Members
  • 20 posts

Posted 09 January 2012 - 03:07 AM

I wasn't able to get the update to work after following the instructions in here or the one's from the other post. I decided to delete the My Flash folder while in testmode and managed to get to the aplupdate program and run it. The unit restarts and shows a blue screen that displays "Updating Image...". The image never changes or updates. I think I have done something permanent to mess up my unit. Please help if anyone can!

#113 pamartin

pamartin
  • Members
  • 1 posts

Posted 18 March 2012 - 05:48 AM

how do I boot up my 310bt into the original mode after have test mode done?

#114 onnaj

onnaj
  • Members
  • 7 posts

Posted 19 March 2012 - 06:40 AM

Boot the device and during boot remove the sdcard.

#115 pionara

pionara

    Member

  • Members
  • 780 posts

Posted 19 March 2012 - 04:19 PM

or rename the TESTMODE folder, to something like TESTMODE1
unit will not boot into test mode

#116 JackTheRipper

JackTheRipper
  • Members
  • 8 posts

Posted 30 June 2012 - 09:59 AM

I managed to update from 310 to 320, I can see the applications on new menu but when I enter them I can see: App mode, press restart and app will work with next booting??? I've tried all lib files and no success so far. Any clues?

#117 carlo80

carlo80
  • Members
  • 7 posts

Posted 25 March 2015 - 12:12 PM

Hello guys,

 

I put files from TESTMODE_BY_CHARLIE to root folder of MsSD card and pushed reset on front panel.... but nothing happens ...

What did I wrong ?

I have f320bt ver.1.00 ....

 

XjcIYBm.jpg






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users