STI4Life06 Posted September 15, 2011 Report Share Posted September 15, 2011 Hi Guys, Just wondering if anyone has a "how to" for setting up an Avic 900bt at home so I can work on it out of my car. It was make everything must easier. I know this has been done but, I dont understand how its done. Thanks, Ben Quote Link to post Share on other sites
FourG Posted September 15, 2011 Report Share Posted September 15, 2011 See the AVIC Wiki for the "ATX Power" topic Jason copied out of the Hacks and Mods forums. http://avic411.com/index.php?/forum/61-wiki/ Quote Link to post Share on other sites
bitman Posted September 17, 2011 Report Share Posted September 17, 2011 as licensed radio amateur i do have a couple 13.8v power supplies for my ham rigs i can use to power the avic when needed. you will need a 12v power supply what can be a car battery or any 12v power supply what can deliver a couple amps as you won't connect any speakers to play music but just want to hack the avic. use a couple probe leads with so called crocodile clips on it to hook them up to the power wires of the avic. best to change the red / yellow wires on the avic power lead. this is well explained in the pioneer avic installation manual on chapter; Connecting the System, Connecting the power cord. in the eu pioneer avic-f710bt installation manual on page 10. this will fire up the avic and the hacking can begin Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.