Jump to content
AVIC411.com

AVICnet 2.1 for AVIC F series, working OBDII! Updated 2014/04/30


Recommended Posts

Hi Ryar,

 

I want to inform all of you, that TomTom is working now 8) Just download the MAPS copy them to the Root of your SD-CARD without any other folder (if your map is DE_AT_CH_890_4234) just make the Folder DE_AT_CH_890_4234 on the Root of your SD don't copy them in the MAP-Folder. You can only use the maps between 890_4234 and 890_4236 don't forget to activate it. :-P

 

 

 

The GPS:

 

Choose other NMEA GPS receiver GPS baud rate 57600 and PORT 6.

 

 

My problem is IgoPrimo, it crashes always when I try to create a new route. I have my crash.log

 

------------------------------------------------------

------------------------------------------------------

------------------ Crash Log Begin -------------------

Current System time: "2012-08-16 14:46:35"

Build version: 9.2.1.179499

Build configuration: Product--ARCHFAM

OS version: 5.0

Uptime: 0 h 4 m 14 sec 0 msec

 

Memory Stats:

 

FreeMemory: 1 MB, 148 KB, 0 B

TotalUseableMemory: 53 MB, 412 KB, 0 B

MaxMemory: 53 MB, 412 KB, 0 B

ReservedMemory: 1 MB, 0 KB, 0 B

ActualCacheSize: 10 MB, 656 KB, 606 B

GarbageSize: 9 MB, 147 KB, 482 B

 

Exception: 0xc0000094

At address: 0x02bd2a80

0x02bd2a80 (A)

 

WinCE CallStack snapshot (function names unknown - map file \Storage Card\APL4\IgoPrimo\iGO.map not found):

 

0x26012fe4 (A)

0x26012590 (A)

0x2601275c (A)

0x26012830 (A)

0x265d01f0 (A)

0x02baca40 (A)

0x02bb3da0 (A)

0x9bc0e414 (A)

0x9bc3822c (A)

0x9bc12238 (A)

0x9bc0e32c (A)

0x02bd2a80 (A)

0x26104498 (A)

0x2611af18 (A)

0x26104b90 (A)

0x260d3734 (A)

0x260d28bc (A)

0x260d29b4 (A)

0x260d2a20 (A)

0x260b7ab4 (A)

0x26031fec (A)

0x26035ce4 (A)

0x26634b0c (A)

0x26018fd4 (A)

0x2639052c (A)

0x265dc07c (A)

0x265d2228 (A)

0x2630b484 (A)

0x2630c98c (A)

0x2630c504 (A)

0x2630e84c (A)

0x2630f730 (A)

0x265cff80 (A)

0x265d01a4 (A)

0x265c252c (A)

0x02b8df80 (A)

 

Global status:

 

bInFocus: 1

bMouseDown: 0

bInLogic: 0

bInRender: 1

CurrentState[128]: st_EasyNav

GPS Pos: (11.878152,43.477958)

Camera: pos:(11.878152,43.477958) rot:0 persp:7000 zoom:100.000000 eng=0)

 

State queue:

 

0. st_MainMenu

1. st_EasyNav

 

Waypoints:

 

0. roadpos:(11.878010,43.477941) realpos:(11.878152,43.477958) Name:Strada Statale Umbro Casentinese Romagnola, 52100 Arezzo, Tucciarello

1. roadpos:(11.877634,43.479689) realpos:(11.877825,43.479710) Name:Strada Statale Umbro Casentinese Romagnola Arezzo, Tucciarello

 

Route Parameters:

 

Vehicle type: Car

Planning method: Fastest

User pref. mask: 0xEDA

Correctness: 88

User u-turn penalty: 3000

 

Maps:

 

map\Belgium_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe89 cid:2122813

map\Czech Republic_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe89 cid:4744253

map\Czech Republic_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe89 cid:4752445

map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf360 cid:7005245

map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf360 cid:7013437

map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf360 cid:7029821

map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf361 cid:7046205

map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbc152d cid:7078973

map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbc1d74 cid:7095357

map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf361 cid:7119933

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61921 cid:8569917

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61921 cid:8578109

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61922 cid:8586301

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61922 cid:8594493

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61922 cid:8602685

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61922 cid:8610877

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61922 cid:8619069

map\Germany_R3_NQ_2012.Q1_120530.fbl ver:0x02ea time:0x4fc61923 cid:8627261

map\Italy_R3_NQ_2012.Q1_120618.fbl ver:0x02ea time:0x4fdf5b14 cid:10593341

map\Italy_R3_NQ_2012.Q1_120618.fbl ver:0x02ea time:0x4fdf5b15 cid:10609725

map\Italy_R3_NQ_2012.Q1_120618.fbl ver:0x02ea time:0x4fdf5b15 cid:10617917

map\Italy_R3_NQ_2012.Q1_120618.fbl ver:0x02ea time:0x4fdf5b15 cid:10626109

map\Italy_R3_NQ_2012.Q1_120618.fbl ver:0x02ea time:0x4fdf6fe8 cid:10650685

map\Luxembourg_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe91 cid:12076093

map\Netherlands_R3_NQ_2012.Q1_120615.fbl ver:0x02ea time:0x4fdb11e6 cid:14181437

map\Poland_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe96 cid:15262781

map\Poland_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe96 cid:15270973

map\Poland_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe97 cid:15279165

map\Slovakia_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbbe9b cid:18367549

map\Liechtenstein_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf454 cid:22561853

map\Monaco_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbc1d74 cid:23086141

 

--------------------- LUA stack ----------------------

Lua stack[ 0] :

Lua stack[ 1] :

Lua stack[ 2] :

Lua stack[ 3] :

Lua stack[ 4] :

Lua stack[ 5] :

Lua stack[ 6] :

Lua stack[ 7] :

Lua stack[ 8] :

Lua stack[ 9] :

Lua stack[10] :

Lua stack[11] :

Lua stack[12] :

Lua stack[13] :

Lua stack[14] :

------------------- Crash Log End --------------------

------------------------------------------------------

------------------------------------------------------

 

Can you see if this is a memory problem.

 

Regards

post-44388-0-93787400-1345183260_thumb.png

Link to post
Share on other sites
  • Replies 699
  • Created
  • Last Reply

Top Posters In This Topic

Thanks ovallball, nice to hear from you too. How is your f500bt? Mine crapped out; the digitizer broke and would not accept touch screen commands. Too bad, at least I got several years heavy use out of it before it bit the dust.

Link to post
Share on other sites

So after spending my whole day off on this I'm running the Italian version with ryar's tts file. Talk about breathing new life into an AVIC (F90BT)! Absolutely amazing! It runs smoother than it literally ever has. All the audio works as well with the Italian storage card files. Only issue as of now is language stuck on Italian on stock igo and settings files. Other than that this is pretty damn sweet!

Link to post
Share on other sites

Thanks ovallball, nice to hear from you too. How is your f500bt? Mine crapped out; the digitizer broke and would not accept touch screen commands. Too bad, at least I got several years heavy use out of it before it bit the dust.

 

Both running ok at present.500 just running on Mr Blues mod and all is well.Still struggling with Primo on my 900 though.It will run ok then just freeze.Now running primo on Wayteq unit which has 128 M memory and running ok after 2 weeks testing.Would love to run Primo trouble free on my 900 but my patience just ran out!

Link to post
Share on other sites

Hi,

 

ryar - nice work :)

 

I'd like to add a few words about internet.

I've got three usb modems:

 

Huawei E3131 - it's completly useless. Probably it's too new. There isn't possible to switch it to Diag mode. After plug in it happens nothing.

 

ZTE MF100 - LED goes red then green. It should be present at COM3 but it isn't. I've read a few posts on Russian forum. Some people had the same problem. I tried different registry setting - still nothing. After a few days I gave up.

 

Huawei E160 - it works (almost) out of the box. I've plugged it in, created connection and it works. Of course I had changed mode to DIAG using PortSwitchTool.

I hope every Huawei modem from SwitchPort.ini (setting file of PortSwichTool) should work because it is possible switch it to DIAG mode.

Link to post
Share on other sites
  • 2 weeks later...

Hi ,i read a lot on this forum ,but i didn't instal the mod yet. Maybe i over looked it , but is it possible to put the the maps,buildings etc. everything from the map content on an sd card. I'm a truck driver and it would be nice if i could put al the country's of europe on it. And wich sys.txt do i need to change and how? Because i saw there where 4 sys.txt files, in apl2 ,igo, primo and primo3.

 

This is what is under folder now in my sys.txt of primo3.

 

[folders]

has_secondary_root=0

sdcardpath="\my flash disk\APL2\"

;app="..\..\Primo"

maps="..\..\IGO\content\map"

buildings="..\..\IGO\content\building"

dem="..\..\IGO\content\dem"

poi="..\..\IGO\content\poi"

;voice="..\..\primo\content\Voice"

;data="\My Flash Disk\User\UserData\primo"

;tts_nua_v5="..\..\primo\tts_nua_v5"

 

 

 

Thanks in advance.

Link to post
Share on other sites

HI Lala1,

 

When you launch primo it will 1st check if there is primo and its contents on the SD card, then USB and finally on the units memory (my flash disk) if the previous are not present. If you place the primo3 folder on the root of the SD card it will launch primo from that location. Simply copy ift from my flash disk/apl2/primo3 to the root of the SD card and edit the sys.txt. As for the sys.txt, each program (primo, primo3, igo) will read the sys.txt which is in the same folder. This would mean you would edit the sys.txt in the primo3 folder (assuming it is the Primo you would like to use) on the sd card. In order for primo to use maps locally (in its own content folder) you can comment out or delete the [folders] and its commands in the sys.txt.

 

Note the primo3 is the newest release of Primo (Primo 2.0). There is no sound in this release except when listeneing to music via SD.

In the Primo folder you will find an older version of Primo (Primo 1.0) and it is the only working release which will give you nav audio regarless of AV source.

 

I hope this clears things up for you, if you have any issues or questions feel free to post back and I will help you as best I can.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...