Jump to content
AVIC411.com

Any way to remove pushing OK upon powering on?


Recommended Posts

  • 2 months later...
  • 3 weeks later...

sorry, i'm use google translate for repack instructions...

"AppRadio + - build additional configuration, scripts and programs that enhance series Pioneer units AppRadio (model SPH-DA01).

AppRadio + provides the following capabilities:

- Launch of external navigation software in conjunction with regular operating envelope,

- Connect to the Internet using an external usb-modem as a modem, mobile phones can act, gprs-modem, cdma-modem, etc.

- Launch other external programs that the user requires.

I thank all the participants of the forum 4pda.ru for assistance in the preparation of this assembly, and special thanks to: carver_ua, Shtorm (3ppc.net), MalVal, djskam.

To connect the modem using usb-port for iphone, pre-attaching an usb-hub, may also need to add. power to iphone, connected through a hub, could be charged if there is a hub of other devices. Thus, a hub can poklyuchat usb-stick and other devices.

In order to have earned the phone (usb-modem) on the usb-connection as a modem for Internet access should be added to the assembly prior to its installation on the machine settings for your phone (modem). To define the settings for a particular model phone (modem), as described here do

You can also read here how to pick up your phone to work with the driver used.

After that, you should get the reg-file that defines the settings for your phone, its structure should be as follows:

REGEDIT4

# Instead will be given your XXXX_YYYY_Z numbers that correspond to your phone [HKEY_LOCAL_MACHINE \ Drivers \ USB \ LoadClients \ XXXX_YYYY_Z]

[HKEY_LOCAL_MACHINE \ Drivers \ USB \ LoadClients \ XXXX_YYYY_Z \ Default]

[HKEY_LOCAL_MACHINE \ Drivers \ USB \ LoadClients \ XXXX_YYYY_Z \ Default \ Default]

[HKEY_LOCAL_MACHINE \ Drivers \ USB \ LoadClients \ XXXX_YYYY_Z \ Default \ Default \ RS23

2_USB]

"Index" = dword: 00000009 # defines to which port to start the initialization

"FriendlyName" = "USB modem" # here should be the name of the device may be any and it will be used in the connection settings as the name of the modem

"UsbMode" = dword: 00000000

"SendEndp" = dword: 00000002 # important parameter, it determines the right to use your phone as a modem

"ReceiveEndp" = dword: 00000082 # important parameter, it determines the right to use your phone as a modem

"ClassEndp" = dword: 00000081 # important parameter, it determines the right to use your phone as a modem

"DeviceType" = dword: 00000001

"Tsp" = "Unimodem.dll"

"Prefix" = "COM"

"Dll" = "232usb.dll" # check that the name of the dll mentioned here as

Place the resulting file to a folder AppRadio \ System \ Registry under any name with the extension reg

Setup and installation of the assembly

Important: The current version of the assembly will only work with version 2.22 firmware device, if you have another version, the official firmware update as usual.

Carefully read the description of the set up and run an assembly:

Spoiler (+/-)

1. Unpack the archive to the memory card in the root directory cards shall be placed AppRadio and files:

- Cetool66.exe

- Cetool66.mscr

- Mortscript.exe

- Toolhelp.dll

2. Insert the card into the machine and reboot the device (do a hard reset), and the machine should be booting in safe mode and will launch testmode installer assembly.

3. Follow the installation instructions, the first installation of the assembly is recommended first to claim 1, "Installing the Assembly."

4. After successful installation, you must re-do a hard reset the device (the installation program will remind you about this before the release).

5. After installation, assembly loading apparatus must pass regular way (with the screen may momentarily appearance of programs to run in addition to the functioning of the assembly). On subsequent inclusions apparatat should also automatically clicks OK on the standard warning that appears at startup.

6. Log in extended menu by pressing the button on the standard settings (in order to still get into the settings to exit the advanced menu on the 'Heads. Menu "from the top bar). The expanded menu is implemented in the style of the iPhone and AppRadio and allows you to scroll the screen horizontally.

7. The expanded menu is implemented by the application iPhoneToday. In the current implementation, customization, adding, deleting programs is possible only by correcting the configuration file: icons.xml, system.xml, are to assemble at: AppRadio \ System \ Menu \ For the changes to take effect, the corrected files to be added to the assembly and make it update by running Setup from the expanded menu.

8. To set up Internet connections, you must run "App. is connected. "from the top bar menu and an extended follow its instructions. To the selected connection is established automatically assign it to the status of "active compound".

9. For automatic initialization and control of the compound is in the process of program "Connector" in the top bar. It also starts automatically when you first start the navigation software using the Internet connection (it is set up in launching the navigation program script).

10. Navigation and other programs should be in a folder at the root of APL SD-card, USB-flash drives or in memory (NAND FLASH), the initial startup scripts are set to this folder." - Serhy

AppRadio_plus_01.rar

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...