bigzipote Posted January 11, 2012 Report Share Posted January 11, 2012 Hi Pionara! My device has two folders (PRG0 yPRG1) and I can boot TestMode with which I can restore my backup. I follow the steps marked on the tutorial but the result is the two white stripes on black background. I've seen that in the update folder there are more files than those mentioned. Also be inserted into My Flash Disk? Quote Link to post Share on other sites
pionara Posted January 11, 2012 Author Report Share Posted January 11, 2012 did you replace My Flash Disk\PRG0 with one from CNSD-130FM update? If so, please delete PRG1 on My Flash Disk (which is old version of app and will be trying to start - unless you have PRG.FLG in My Flash Disk\) - If you still had PRG1 folder, then you did NOT follow directions completely. also, check that My Flash Disk has VOLUME.DAT? Quote Link to post Share on other sites
bigzipote Posted January 12, 2012 Report Share Posted January 12, 2012 Yes, I replaced the folder PGR0 why this folder CNSD-130FM. Also delete the folder and file PGR1 VOLUME.DAT is in place. My device does not contain PRG.FLG. Here is another picture with another bug. Quote Link to post Share on other sites
pionara Posted January 12, 2012 Author Report Share Posted January 12, 2012 ok. did you remove all other folders and files inside My Flash Disk before copying new files? Did you copy APL and FONTS folders and EL090APL.HTM and EL090APL.VER from CNSD-130FM folders to the new folder My Flash Disk/PRG0 ? Maybe you can give me a detailed list of what you did, step by step. Also, if possible, please show me a list of files folders on My Flash Disk... Quote Link to post Share on other sites
basketthis Posted January 12, 2012 Report Share Posted January 12, 2012 Any update pionara for my/our situation? Check your pm btw. Quote Link to post Share on other sites
pionara Posted January 12, 2012 Author Report Share Posted January 12, 2012 replied to your pm... without bootloader code to examine, i dont know what options there might be for triggering recovery flashing (if it exists)... how are your jtag skills? Quote Link to post Share on other sites
bigzipote Posted January 12, 2012 Report Share Posted January 12, 2012 These are my steps: 1 - Run the file "update / user / prg / apl / aplupdate.exe" which is on the SD Card, choose the second option and the device automatically resets to 5 seconds. 2 - Remove the entire contents of My Flash Disk. 3-1 - Install step by step as shown in the tutorial, only the folders and files mentioned (including EL090APL.HTM and EL090APL.VER, VOLUME.DAT, VERINFO.DAT, WINCEIMG.bin and WINCEIMG.cks) and restart I get the black background and the two white lines. 3-2 - copied and pasted from the CNSD-130FM update the folder and rename PRG0 PRG, I think the SYSTEM folder and inside the folder I put my RENEWAL and VERINFO.dat file, finally I put the other files in place and restart I get the error message starting with 6 below. It will be a simple error on my part but it does not know where. Quote Link to post Share on other sites
basketthis Posted January 12, 2012 Report Share Posted January 12, 2012 I'll research more on jtag and see if i can come up with anything. The ARM processor is a popular processes used on many devices... I think we can figure something out with this. Quote Link to post Share on other sites
pionara Posted January 12, 2012 Author Report Share Posted January 12, 2012 basket, i think one can use a jtag app like sjf2450 or similar to extract boot loader to examine.. bigzipote, in your My Flash Disk, you should have following files/folders: PRG0\APL\... PRG0\FONTS\... PRG0\EL090APL.HTM PRG0\EL090APL.VER SYSTEM\RENEWAL\VERINFO.DAT VOLUME.DAT Quote Link to post Share on other sites
bigzipote Posted January 12, 2012 Report Share Posted January 12, 2012 My captures. Quote Link to post Share on other sites
pionara Posted January 12, 2012 Author Report Share Posted January 12, 2012 I'm not sure about this one... Maybe some other guys with F310BT can help you out? I'm not aware of anything special needing to be done for F310BT. How is your "My Flash Disk2" NDATA? I trust that it was not touched as part of the upgrade? Another try: delete the SYSTEM folder on My Flash Disk and see if it will start up... Also, you may want to try running app & maps from SD card from this post to see if it starts up ok: http://avic411.com/i...post__p__241453 Quote Link to post Share on other sites
bigzipote Posted January 12, 2012 Report Share Posted January 12, 2012 The partition "My Flash Disk2" has not been modified and contains the NDATA, when I restore my backup navigator works smoothly and the other options too. Quote Link to post Share on other sites
pionara Posted January 12, 2012 Author Report Share Posted January 12, 2012 I'm scratching my head on this one bigzipote... try running it from SD card (look at the thread for instructions).. maybe one of the other F310BT guys can help you figure this out? Quote Link to post Share on other sites
basketthis Posted January 12, 2012 Report Share Posted January 12, 2012 Does any of this help? http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=127723&whichpage=80 Quote Link to post Share on other sites
bigzipote Posted January 15, 2012 Report Share Posted January 15, 2012 Sorry, I was busy and have not had time to test things out of the link. I'll try the option to run from SD card. I will continue waiting for any user who has suffered the same problem tell me how you have solved it. EDIT : Can anyone share their backup "My Flash Disk" updated to 2.0001, is the only solution I find to my problem. Thanks for your help. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.