3rdman Posted December 16, 2011 Report Share Posted December 16, 2011 Well, it looks like I had accidentally copied the wrong file in place of the Appslib.dll so all my attempts at running programs was failing. This morning, I double checked, installed the file proper and it works! I found a version of TCPMP called ShincoPlayer (480 x 272) at http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=110760 that runs AVIs well but I get no sound at the moment. So, I have a few more questions... Can someone point me to a TCPMP version that is known to work with sound on our devices? Also, since the Appslib.dll installed bypasses validation, can I simply change the EXE files in the Video Player folder or the Picture Viewer folder that houses the non-running official apps? At the moment, the ShincoPlayer is being directed to run from the launcher app...nothing has been changed so it runs after changing ports so perhaps that is the reason sound doesn't work? Quote Link to post Share on other sites
capatina_mihai Posted December 16, 2011 Report Share Posted December 16, 2011 My version of the F320BT O/S i was originally running was V2.000x. And accidently tried to install igo8 and followed Pionara steps without knowing that i shouldn't do that because i have already had the right os.I tried hardly to search the proper os files on the internet and the price of original update sd card from Pioneer (150Euros) is too expensive for me and, if you , dear Somniac can upload the 2 files(winceimg.bin and cks) or entire image if you can, i'll be deeply grateful to you.Thank you very much for all your effort and advices. hope to revive my unit soon) Quote Link to post Share on other sites
3rdman Posted December 16, 2011 Report Share Posted December 16, 2011 I found out why I had no sound...I had previously turned off the "BEEP" sound of the head unit as it drives me crazy...well that is sound of the system and I'm sure this was obvious to everyone but me. In any case, It's working 100% perfectly now and I'll be trying other programs to see what can be done. I had poorly installed MioPocket before but it was merely to see if I could get it running...I'll try to have MioPocket Mini running tonight and (for the sake of others as dense as me) I'll post my results later. Quote Link to post Share on other sites
pionara Posted December 16, 2011 Author Report Share Posted December 16, 2011 Cool. I suspect there may be a way to do this programmatically from a mortscript (by placing or editing a file on the flash). I think there was a volume settings file somewhere.. You could simply drop in your own .exe into one of the existing .exes, but leaving the .enc and .pwd alone. You can customize the icons by editing the .bmp files. Also, you can even extend the apps "menu" and customize for multiple apps, by editing (w/ hex editor) the sd\AVIC-APPS\Applist.dat to point to other apps. The real power is to be able to have the menu point to an "app" which is just the mortscript "autorun" + an equivalently named .mscr (the actual mortscript). From there you can do the other things you need to do (like make comport changes or enable activesync via regedits, soft reboot, copy files, prompt user with simple menus, etc). I would highly recommend the mortscript manual as required reading for anybody who wants to do any kind of "modding": http://www.sto-helit.de/downloads/mortscript/MortScript-Manual.pdf It's basically a VisualBasic script-like language that is VERY powerful if you want it to be... in other news: Sadly, in an attempt to research capatina_mihai's issue, I more or less bricked my u310bt by intentionally flashing the wrong firmware (for z110bt), and I am at the same place he is - getting the bluescreen. The problem here is that it's not a standard uboot style screen. I cant see any way to get it into an "emergency" recovery or boot mode. Perhaps it is looking for "good" files to boot or flash from. It does not seem to see or care about winceimg.bin/.cks files, so either it's something else, or this sucker will need jtag (. Quote Link to post Share on other sites
3rdman Posted December 17, 2011 Report Share Posted December 17, 2011 Update...I decided to give iGO8 a try...after all the praise its gotten here and elsewhere I wanted to see what I was missing. LOL...I see why you guys prefer it. It is presently dedicated to run from Pionara's file on my head unit as well. I still wanted the ability to play video files so on a lark, I copied all the media player files from MIOPOCKET and put them in the AVIC-APPS\Video Player folder. I then renamed the existing exe file to "videoplayer.OLD" and renamed the new one "videoplayer.exe"...surprisingly, it works! The program loads and I can play any file I want! I tried to do the same with the other non-working apps from Pioneer, but those wouldn't work, by the way. There is a volume control on the new player and that works perfectly so I guess there is away to do it "programatically". I really wanted to get MioPlayer running but couldn't. On the other hand, I only really wanted it so that I could choose from a list of apps. Oh well, I'm still crazy happy and grateful for what y'all have accomplished! I had stopped hoping for a hack over a year ago... By the way, if there is anyone that does have mioplayer up and running, would you mind posting a detailed "how-to"? I'm just having no luck with that... Edit: Sucks to hear about your bricked unit...I hope you get it up and running again soon! Quote Link to post Share on other sites
capatina_mihai Posted December 17, 2011 Report Share Posted December 17, 2011 Very sorry to hear,Pionara,I decided to take the unit to pioneer service Quote Link to post Share on other sites
Somniac Posted December 18, 2011 Report Share Posted December 18, 2011 My version of the F320BT O/S i was originally running was V2.000x. And accidently tried to install igo8 and followed Pionara steps without knowing that i shouldn't do that because i have already had the right  os.I tried hardly to search the proper os files on the internet and the price of original update sd card from Pioneer (150Euros) is too expensive for me and, if you , dear Somniac can upload the 2 files(winceimg.bin and cks) or entire image if you can, i'll be deeply grateful to you.Thank you very much for all your effort and advices. hope to revive my unit soon) I've searched my unit and I'm afraid I can't find the winceimg.bin and cks files anywhere.They must be supplied as part of the CNSD update CD to provide the firmware and the O/S in a packaged form.I'm sorry about this, I hoped I could help.It looks like your only chance is to find a copy of CSND-230FM somewhere. Quote Link to post Share on other sites
bobomango Posted December 18, 2011 Report Share Posted December 18, 2011 I installed Igo 8.3 on SDcard and am able to run it fine when the LCD faceplate is detached from car but when I try running it via Apps Launcher when it is plugged into the car (stationary car/not moving), it gives me error that it cannot start while running Furthermore, whenever I turn on LCD, it always boots into the original Navi, doesn't go directly to iGo (even when I turned the unit off while iGo was running) sorry about the bricking, sucks Quote Link to post Share on other sites
3rdman Posted December 18, 2011 Report Share Posted December 18, 2011 I installed Igo 8.3 on SDcard and am able to run it fine when the LCD faceplate is detached from car but when I try running it via Apps Launcher when it is plugged into the car (stationary car/not moving), it gives me error that it cannot start while running Furthermore, whenever I turn on LCD, it always boots into the original Navi, doesn't go directly to iGo (even when I turned the unit off while iGo was running) sorry about the bricking, sucks Did you bypass the handbrake safety feature? Quote Link to post Share on other sites
bobomango Posted December 18, 2011 Report Share Posted December 18, 2011 Did you bypass the handbrake safety feature? no, but the car is not moving, and I never connected Pioneer unit to the handbrake when I wired it in. Quote Link to post Share on other sites
3rdman Posted December 18, 2011 Report Share Posted December 18, 2011 no, but the car is not moving, and I never connected Pioneer unit to the handbrake when I wired it in. Yeah, it's unlikely to be the problem but I can't think of another reason it wouldn't work...Also, I noticed that Pioneer did change how the system disables certain functions for safety since ver. 1.0003...it's now GPS based but perhaps bypassing that switch has its uses anyways? Just guessing, of course. Quote Link to post Share on other sites
bobomango Posted December 18, 2011 Report Share Posted December 18, 2011 Yeah, it's unlikely to be the problem but I can't think of another reason it wouldn't work...Also, I noticed that Pioneer did change how the system disables certain functions for safety since ver. 1.0003...it's now GPS based but perhaps bypassing that switch has its uses anyways? Just guessing, of course. hmm, well, I'm trying a different version of Igo right now, I'll see what happens again this version seems a little better, but still if I turn the LCD switch to "off" while in Igo, it turns off, but when I switch it to "on" afterwards, I am in Igo for only 1 second, and then it immediately reboots the unit back to original Navi (pioneer logo shows up, etc). I wonder if this is something to do with Pionara's launcher.mscr settings Quote Link to post Share on other sites
pionara Posted December 18, 2011 Author Report Share Posted December 18, 2011 it worked fine for me when connected to the unit. I have always had my parking brake wire bypassed (grounded), so that sounds like what it could be. Quote Link to post Share on other sites
Somniac Posted December 18, 2011 Report Share Posted December 18, 2011 hmm, well, I'm trying a different version of Igo right now, I'll see what happens again this version seems a little better, but still if I turn the LCD switch to "off" while in Igo, it turns off, but when I switch it to "on" afterwards, I am in Igo for only 1 second, and then it immediately reboots the unit back to original Navi (pioneer logo shows up, etc). I wonder if this is something to do with Pionara's launcher.mscr settings Its exactly the same for me. I had the same problem with all the apps running from the Navi apps launcher using Pionara's appslib.dll. Pionara kindly showed me what he'd changed and I did the same on my original appslib.dll (my unit is a F320BT not a U310BT) and now all apps (explorer, visual clock, etc) all resume where they left off. All that is, except iGO8 it still resumes for a second and then reboots back to the stock Navi. I'm going to experiment with a faster SD card and restricting the memory that iGO uses to see what happens. iGO also has sys.txt parameters that control power conditions so they might also be an area to play with. I'f I come across a fix I'll post here. Quote Link to post Share on other sites
bobomango Posted December 19, 2011 Report Share Posted December 19, 2011 so parking brake bypass worked, i guess it was a feature of new OS 2.0. iGo seems to work now - had to use gps_scandebug.exe to find com/baud i know Pionara launcher.mscr settings swaps com 2 for 4 if GPS uses 2 Mode button doesn't seem to work well while in Igo though Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.