14 replies to this topic

[nodnarb901]

I have had my avic d1 installed for about one week and then last week installed my 60mp update disc. This morning when I started the car I get a Caution: sreen image may appear reversed. Any idea what this is?

[tillithz]

that is for the reverse backup camera. its just telling you that the image could be reversed depending on what camera your using

[nodnarb901]

I have no camera, how do I get this message to go away?

[tillithz]

where is this message displayed ?

[nodnarb901]

It comes up immediately after starting the car, after the Pioneer screen goes away and before the navigation disclamer screen when you have to press ok to procede to use the navi. The whole screen is black and in light grey/white lettering at the bottom in the middle it gives me the message.

[nodnarb901]

BTW; nice car. I drive an stage 2 04 STi.

[tillithz]

in reverse? maybe your reverse got switched? check the reverse setting that has batt or ground. maybe its thinking your in reverse when your not, and when you put it in reverse it thinks your normal.. is that what is happening?

[nodnarb901]

I don't think so. Everything else is working fine on my navigation, tracks accurate, etc....

once I get past that screen it doesn't come up any more.

[nodnarb901]

No it doesn't happen when i leave in in reverse. I start the car, pioneer screen comes up, then the caution: screen image may be reveresed. then the pioneer navigation warning screen comes up, I press OK. then goes into the navigation just like normal.

[tillithz]

check the reverse camera setting

[nodnarb901]

Thanks for your help with this. What should the reverse camera setting say? I assume you mean in the connection screen.

[tillithz]

in the setup screen, maybe even initial, i dont recall, there is a setting that tells the d series what polarity the reverse is. try changing it and see if the problem exists still

[jimmy303]

If you don't have a backup camera, you should never see that screen. Go into your setup menu, and turn off the camera input.

[nodnarb901]

Went out to my car yesterday afternoon and turned off the camera input. took care of my problem. guess I accidently turned it on.
Thanks for the help.

[Cjones1560]

I jus bought one n mine was doing it but on the home button when u cango to reverse camera it was turned on i turned it off been fine ever since