Jump to content
AVIC411.com

What is the best way to bypass the parking brake on the X940BT?


Recommended Posts

  • 3 months later...

1. On the RCA connector, move the yellow/black stripe wire (mute wire) up 1 position, so that it is sitting next to the red wire after the move

2. Connect the mute wire (from RCA connector), the light-green parking brake wire (from radio power cord) and the black ground wire (from radio power cord) together

3. Either 1 of the above 3 wires can be tapped to connect to the ground wire of the wiring harness for your car.

 

This link pretty much tells you how to do it.

 

Link to post
Share on other sites
  • 1 month later...
  • 2 weeks later...

what do you do if the person who installed your radio didnt even use that white harness. they only used the black one. please someone help me figure this out.

 

If you dont have that harness, you can connect a very small connector to the corresponding pin on that plug on the back of the radio, and connect it with a short wire to the phillips screw right above the plug.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...