Tucano Posted January 29, 2007 Report Share Posted January 29, 2007 I have a Avic-N1 that the Touchscreen is out of alignment. When you touch a button on the menu, it is off by half an inch on the left side. in the middle is ok and the right side is ok. in order to select anything on the left side, I have to move over to the left of the selection about half an inch. How do I re-calibrate the screen? Thanks - Tucano Quote Link to post Share on other sites
Two_Cold Posted January 29, 2007 Report Share Posted January 29, 2007 Ask in the N1/2/3 section. Quote Link to post Share on other sites
cntrylvr79 Posted January 29, 2007 Report Share Posted January 29, 2007 You have to go into the service menu to adjust the touch screen calibration. Search and ye shall find. Quote Link to post Share on other sites
Tucano Posted January 30, 2007 Author Report Share Posted January 30, 2007 I posted in the wrong area...sorry... Thanks for the info Quote Link to post Share on other sites
Zrullac Posted February 3, 2007 Report Share Posted February 3, 2007 You have to go into the service menu to adjust the touch screen calibration. Search and ye shall find. I have this same problem with my D1. I just joined this forum. How would I search for the procedure to realign my touchscreen. Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.