Jump to content
AVIC411.com

Recommended Posts

This is from a post I just did for another member I feel like I kind of give the short un orgainzed version to lots of people but here is a more organized version. This is not a fix all but it will often fix many reboot problems, some are more complicated which may not allow you in to test mode, or may even reboot after files have been replaced. This should be attempted before the Pinned MBR fix is tried.

 

go to this thread ; http://avic411.com/i...f-avic-f-files/ Its also pinned to the top here "Torrent Full of Avic F files" download the zip with a torrent file with in it. Use a torrent downloader (Azerus Vuze, Utorrent, Bittorrent, ect) to download the larger torrent to your computer (its 8.4 gb and should take much of the rest of the evening to download). Once these files have been downloaded

 

1. Format an SD card that is at least 2 gb big.

2. Unzip the file you have downloaded

3. Locate the File Testmode V 2.3. Open folder Copy the folder within entitled "testmode"

4. Paste that file into the root level of your SD card

5. Locate folder "My Flashdisk Back up" Open it then Open the folder 2.0 f700 Copy this folder

6. Paste that file/folder into Root level of your SD card along with "test mode"

7. Eject SD card and head to car

8. Put SD card in avic and turn it on

9. wait for avic to load into test mode (likes like windows 95 its called WindowsCE)

10. Click Start > Programs> Windows Explorer

11. Double Click SD card > Double Click f700 up top click edit>select all then Edit>Copy

12. Click Start > Programs > Windows Explorer (again) to open a second finder window

13. Double Click "My Flash Disk" that looks like a grey little icon

14. you will see a bunch of folders and icons it should look similar to when you opened F700 folder from SD card Click uptop Edit Paste

15. If you are given an error message about not enough room ignore or x it out ( i forget the exact step)

16. If asked if you want to replace file, select YES ALL

17. You will see that its gonna take upto 2 hrs but in reality it takes about 15 minutes to replace all files.

18. Once its finished turn off our car

19. eject SD card

20. Turn on Car hopefully at this point it loads perfectly like its a new avic... this may take a few momments and in initial menu it will say please wait system start up in process.

 

21. If its stuck in loop mode put SD card back in and re enter test mode go back to "My Flash Disk" delete all the files that say "gpspara(number).bin

 

If this doesnt work you need further help which is doable in most cases but its more indepth. This at least will give you a basic understanding of how to navigate inside WinCe

 

Glad to see/hear that this thread is helping lots of people, I hope it continues to do so. Also several people have asked for my paypal account for helping them out my email for paypal or further help if you are really stuck and for some reason i dont respond here quick enough (with in 3 days... please give me 3 days to respond) is tail24@aol.com make subject Avic Help. Thanks to all that have donated and do in the future, but dont worry I will help without any donation what so ever some just feel like giving because they are saved lots of money.

Link to post
Share on other sites
  • Replies 185
  • Created
  • Last Reply

Top Posters In This Topic

That's what I thought but I tried several time to format and install different updates (from pioneer or the F700 backup) but I still have the very same problem : I can't get access to the audio/video setup or menu, can't synchronize my iphone, even listenning a cd is impossible. I can use the general menu but that all. And most important thing, my F900bt restarts evrey 3/4 minutes. I used to have a message telling about the restart but now it disapeared....only the message unfoortunately the device still restarts.

I bought an map and firmware update the cnsd- 300fm. I really hope it will work because I have no other idea...

Link to post
Share on other sites

ok my bad. I found the topic, I followed every steps. The device restarts with the pioneer logo (it used to start with a personnal screen). Unfortunately, I still have the same problems. Reboot every 5minutes, impossible to get access to anything but the general settings, can't play cd (do not eject cd ), and my Iphone can't find the bluetooth. I might receive the official map update tomorrow...but I am not pretty sure my F900bt will work again

Link to post
Share on other sites

No I can't. But the pioneer sd card update includs map and firmware update, right? Any way, I need the device number but I can't get it. They said put the sd card and turn on the f900bt and you'll get the device number but all I get is an error message like it can't find the data... I am so....blocked. The tip you gave was for us device, right? Maybe it does not work because of my offical european update...

Link to post
Share on other sites

oh yeah this is for US units... all my backups a for US only.... you will need to a backup of a euro model and maps which i dont have. Did you do the format mbr? what sdmlc files did you use?

 

 

find a torrent in the mods threads with euro maps and ill try and walk you through fixing unit

Link to post
Share on other sites

Well thank you very much. I used the nn746uc_sdmlc_0_108009984.I haven't find a euro backup. Do I need mods threads with euro maps even if I have the cnsd-300fm? I never format mbr. Until now I just install wince (format) my device and then install the pioneer 1.900000 or 2.009000 update. But all I get are the problems I explained.

I gonna search for format mbr information. Do you think it could help? Does a euro sdmlc exist?

Link to post
Share on other sites

Ok on your donwload files, there is SDMLC_NN746_EW_sn00aa0f. SO I was thinking about doing a a format mbr, then using the SDMLC_NN746_EW_sn00aa0f file with Open DiscRW and then, install the 1.900000 update from pioneer (no map inside) after that, I would try to install maps and firmware update from the cnsd 300fm. What do you think?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...