guizmo Posted July 4, 2016 Report Share Posted July 4, 2016 Hi your problem is curious , ok do that format your sd card on fat 32 , after copy all files hybrid 4001 inside your avic copy the files one by one use total commander and copy apl ,apl 2 etc.... after copy map ,dem , do not touch to gps para files , delete your user data in his folder ( delete all folder) and turn off the avic retire the sd card and restart Quote Link to post Share on other sites
read_blake Posted July 5, 2016 Report Share Posted July 5, 2016 It worked! Thank you very much. I believe part of the problem was the SD card not being freshly formatted. After doing that, and re-copying the files, I updated the OS from the flash card. When I did it this time, it took a bit longer, went to 100%, then went through writing image, and showed the confirmation that the CE upgrade was Ok. It didn't do that the first time. That was a good sign. From there, I used total commander, copied all the files individually, restarted, and after a minute, it went through the initial setup. Music works, GPS opened, but I need to go for a drive and try it out. So far so good. Merci beaucoups guizmo, votre aide est incroyable! Les instructions sont tres bien. J'apprecie tout votre temps et expertise! Quote Link to post Share on other sites
guizmo Posted July 5, 2016 Report Share Posted July 5, 2016 have a nice trip happy to help Quote Link to post Share on other sites
James_L Posted March 4, 2017 Report Share Posted March 4, 2017 ​Looking for some help please. I've just purchased a 2008 ford escape for my daughter that has a AVIC- F700BT, I live in Alberta Canada, I've read through several different threads but none seem to be exact to my problem. So here's the issue when I first start the vehicle the unit powers up and I see a ford logo on the screen, then it wouldn't do anything, no buttons would work. I down loaded the 200.6000 firmware update and the Bluetooth update from the pioneer website onto a SD Card. I installed as per online instructions. It took about 15 minutes and seemed to install fine. once completed I can push the menu button and see the 3 main icons nav, phone and audio, the only one that takes me to a different screen is the audio and it takes me to 4 icons but only 2 are high lighted. the 2 system setup icons don't light up the other 2 do nothing. the map button on the unit goes to the GPS warning screen then the whole system freezes. About every 5 minutes the system reboots back to the ford logo.. I tried resetting the system with the button and it makes no difference, hoping for help to get back to working condition Quote Link to post Share on other sites
SlimShadySkip Posted July 15, 2017 Report Share Posted July 15, 2017 I have a problem, because mine will not even let me open the Face Panel to put SD card Into it.... It is stuck in a loop will not fully boot up. It boots to the Language Select Screen, will not let you select anything Freezes there for a few Seconds then just Reboots again. Keeps doing this over and over and over. Is there someone or somewhere that I can Send This to have it fixed??? I am desperate Please help Scott R Maricopa, Az BTW, my model is the AVIC-8000nex Quote Link to post Share on other sites
joaquinain Posted October 3, 2017 Report Share Posted October 3, 2017 Hi guys, I own a F930BT AVIC unit. I have used the hacks of this forum (some of them), upgraded my unit to the last European Maps (2015 version) and everything was working fine. But recently my unit has gone crazy and reboots now and then. I tryed to upgrade to the 2017 EU maps following the instructions of the proper post of this forum without success, every SD cards gives me error no matter wht do I try. I do not know how to proceed to correct my unit and avoid rebooting all the time randomly. I have to say that the unit works, starts, and is working long time before it reboots without any reason, or sometimes it takes seconds to reboot, but it is working, I can listen to the radio, the GPS works fine, and so on, the only problem is it reboots randomly with no reason... I am sure it is a software problem. I can't follow the steps of the first post because my unit has no WindowsCE, I only can go to Testmode. Any suggestion of how to fix my unit? Thanks in advance. Quote Link to post Share on other sites
jb79 Posted April 5, 2018 Report Share Posted April 5, 2018 (edited) Hi, I've got the reboot problem with my European F900BT again (after some years now). I downloaded the files that were posted some pages ago. First I tried to update WINCE, it looks good but when it said reboot I did that and only get my boot-logo and after some seconds a black screen. I tried to copy all files for the testmode on the sd card but it didn't boot into test mode. Any ideas how to bring the F900BT back to life? My map version was 1.xxx and my system version 2.0001 I think. Edited April 5, 2018 by jb79 Quote Link to post Share on other sites
ekogeotron Posted April 16, 2018 Report Share Posted April 16, 2018 HI everyone! I have AVIC-F900BT and he start to reboot itself every 4-5min. do you have file to upload again to try to solve this problem? thanks in advance! Quote Link to post Share on other sites
Pinktoonie Posted June 29, 2018 Report Share Posted June 29, 2018 I have the AVIC-F900BT reboot problem, does anyone know how to solve it for the Canadian version? Most of what I've seen adheres to the European one. Been losing my mind over here. Thanks! Quote Link to post Share on other sites
finrt2 Posted November 29, 2018 Report Share Posted November 29, 2018 Hi Guys. I have an AVIC-F90BT that has developed the, what seems to be a common (but dreaded), resetting loop issue. I contacted Pioneer and they wanted me to send them the unit for repairs which will cost a minimum of $230 for their service! I see that there are ways to do some software file changes, but I cant seem to find a good tutorial on how to do it, nor a valid link to download the files. I have heard of torrent, but I have not idea how to do that. Can anyone...ANYONE help me out, PLEASE??? Thanks in advance for taking the time to help! Any tips are much appreciated. Quote Link to post Share on other sites
adem tat Posted November 29, 2018 Report Share Posted November 29, 2018 On 19-4-2014 at 14:50, guizmo said: Hallo jouw land is VS Canada of Europese Unie? ik heb volledige back-up voor avic 900bt ik weet niet of hij op je apparaat kan werken, maar ik kan je alle bestanden geven die ik heb. hoi, mijn f900bt start ook niet kunt u mij ook helpen. a.tat@live.nl alvast bedankt Quote Link to post Share on other sites
adem tat Posted November 29, 2018 Report Share Posted November 29, 2018 hallo, mijn avic f900bt strart niet meer heeft iemand hier een oplossing voor. alvast bedankt groet, Tat Quote Link to post Share on other sites
adem tat Posted November 29, 2018 Report Share Posted November 29, 2018 waar kan ik de fix downloaden foor f900bt groet, Tat Quote Link to post Share on other sites
Toldi Posted December 7, 2018 Report Share Posted December 7, 2018 Hi Everyone I am new here.I just purchased a f900bt. It has some boot up problems. If I switched on the lights were flashed once, and after not happened nothing. When I step into the main menu after few second it was turned off by itself. I had try to refresh the software, but the problem is the installation is started and till 44% was alright everything, after it was turned off, and didn't continued the installation. Please help me out, how can I fix it. Thanks Toldi Quote Link to post Share on other sites
kikasso Posted December 26, 2018 Report Share Posted December 26, 2018 hola meti en la microsd los archivos avicz110 + testmode y empezo a instalar pero cuando termino se puso la pantalla negra y no enciende, desenchufe la batería del coche y sigue igual hello I put in the microsd files avicz110 + testmode and started to install but when I finish it turned on the black screen and it does not turn on, unplug the car battery and stay the same Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.