pheobian Posted June 6, 2012 Report Share Posted June 6, 2012 Hi all, I'm having a massive problem updating my UK AVIC-F20BT to firmware version 2.00300. My unit just doesn't automatically startup into update mode. I've followed instructions from Pioneer as below without any success. PROCEDURE: Once you copied the file "AVICF20BT_APL2.00300.zip" to your computer, double click the file to decompress it. (If you do not have a decompression utility installed on your computer, you can easily download one for free.) Put the SD-card in the SD-card reader/writer. Copy the unzipped folder "AVICZ110" to the empty SD-card. Confirm that the folder name and the file size are correct on the SD Card. To check the file size in Microsoft Windows, select the folder, press the right mouse button, and select "Properties". If the folder name and size do not match the ones listed below, perform steps B and C again. AVICZ110 –folder 63,9 MB (67.060.785 bytes) Update the firmware of your navigation unit: Switch on your Navigation unit by switching on the ignition of your car. Press the [OPEN CLOSE] button and touch [sD Insert] (or [sD Eject] and remove the original card). Insert the SD card with the prepared Firmware. The update will start automatically and takes about 2 minutes. After updating process is finished, the unit will restart itself Verify that the Application version is 2.00300 by following the steps in section A. I've not managed to get step 5 & 6 as step 4 does nothing. I've tried two SD cards, formatted them several times (fat & fat32) checked to folder size and still the update fails to start. Can someone please help. Cheers, Pheobian Quote Link to post Share on other sites
tail24 Posted June 6, 2012 Report Share Posted June 6, 2012 Are you on a mac? I know very little about your unit. But make sure your SD card is formatted FAT and is a type that your avid can read.... I believe avic struggles with some sd cards Quote Link to post Share on other sites
pheobian Posted June 6, 2012 Author Report Share Posted June 6, 2012 Are you on a mac? I know very little about your unit. But make sure your SD card is formatted FAT and is a type that your avid can read.... I believe avic struggles with some sd cards Yup on a MAC but also formatted on my Win7 laptop too. The two cards I've used played music from them without any problems - my unit just won't update the firmware. Quote Link to post Share on other sites
tail24 Posted June 6, 2012 Report Share Posted June 6, 2012 No idea then.... I'd say use win7 again reformat in fat 32 then add files from within update zip Quote Link to post Share on other sites
VBLUE42 Posted June 6, 2012 Report Share Posted June 6, 2012 Are you sure it isn't already updated? Quote Link to post Share on other sites
pheobian Posted June 7, 2012 Author Report Share Posted June 7, 2012 Are you sure it isn't already updated? Nope, checked and it's still on 2.0000 Quote Link to post Share on other sites
Dudo23 Posted August 10, 2012 Report Share Posted August 10, 2012 Version: 2.000 on first screen but I've got this on my screen after push upper left corner Quote Link to post Share on other sites
Gummers Posted November 15, 2012 Report Share Posted November 15, 2012 I have the same problem, try'd 4 cards en FAT of FAT32 but nothing helps. but when i put the crack software 2.004 on a SD card, it update's! but afther 100% it say's update faild! can sombody help me?? sorry for my bad engles. F20BT @ 2.0000 EU Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.