Zboy Posted August 6, 2012 Report Share Posted August 6, 2012 Unit will not tune to certain channels. An example is Sirius channel 50, it is a channel that should have programming on it. Channel 49 works as expected and when I hit channel up button, radio tunes to channel 51. Likewise, with the down channel button. If I try the 10 digit keypad and type 050 enter, radio stays on current channel. There are other channels "missing" along the way that according to Sirius have programming that I cannot receive. For troubleshooting - I have had SIrius folks resend the signal to my unit 3 times. I have disconnected the Sirius tuner and Sirius Bus Interface unit power and connecting cables from each other and the Z3 main unit. I have called Pioneer tech support with no suggestions from their end. I have just recently re-subscribed to Sirius and am thinking that these "missing channels" might not have existed when I had the unit first installed about three years ago and maybe there is a reset/reprogramming that needs to be done on the unit? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.