Bento Posted October 7, 2012 Report Share Posted October 7, 2012 TeleAtlas 2012 Q1 Maps for Europe For USA/Canada see: Navteq 2011 Q4 (Released in 2012) Maps for the United States & Canada I have tested this on my AVIC F-9110 BT with firmware (3.x), the maps are fully functional on my unit. This should also work for the F700 and up. Not sure about the F500. I haven't updated to firmware 4 yet but this should work for firmware 4.x as well. Instructions: Download the files below Extract them to the root of your SD card Insert SD card with only the folders from the ZIP file in the root Boot the unit in testmode (if you have the testmode folder in the root this will happen automagically) Make a complete backup of the flashdrive! (Instructions) Verify your backup is correct and copy this over to you PC so you have 2 backups. Go into the iGo/CONTENT folder. On my unit this folder is located in the APL2 folder. Delete the MAP, POI and LICENSE folders Copy the MAP, POI and LICENSE folders from the SD card to the flashdrive of your unit Copy the EZRIDER.EXE to the iGo folder, replacing the file already there Now reboot the unit, remove the SD card and enjoy the latest maps Links are interchangable (parts are the same). Rapidshare (Uploaded 7/10/2012) https://rapidshare.c...2012.Q1.zip.004 https://rapidshare.c...2012.Q1.zip.007 https://rapidshare.c...2012.Q1.zip.002 https://rapidshare.c...2012.Q1.zip.003 https://rapidshare.c...2012.Q1.zip.008 https://rapidshare.c...2012.Q1.zip.006 https://rapidshare.c...2012.Q1.zip.005 https://rapidshare.c...2012.Q1.zip.001 https://rapidshare.c...2012.Q1.zip.009 Uploaded.to (Uploaded 7/10/2012) Still uploading... Usenet (Uploaded 7/10/2012) Download the attached ZIP file for the NZB If you messed up your unit just get back into testmode and restore the files you backed-up. Enjoy your new maps Cheers, Bento NTQ_2012.Q1.zip.zip testmode.zip Quote Link to post Share on other sites
ant_mb Posted October 8, 2012 Report Share Posted October 8, 2012 Awesome for you EU guys, but does anyone have this in th US version? Quote Link to post Share on other sites
Bento Posted October 9, 2012 Author Report Share Posted October 9, 2012 I will check if I can find any US maps. Quote Link to post Share on other sites
Bento Posted October 9, 2012 Author Report Share Posted October 9, 2012 The only thing I found is a Torrent with the latest Navtew 2011 maps from Quarter 4. There aren't TomTom/TeleAtlas maps, some people prefer one or the other. I'm downloading them right now and will upload to Usenet later. In the mean time you can use this Magnet link and paste it into your Torrent client: magnet:?xt=urn:btih:20ac109c3ca2cb8541c4953adf827e4bae95a30f&dn=iGO+R3+US+Canada+Navteq+2011+Q4+%282012%29&tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A80&tr=udp%3A%2F%2Ftracker.publicbt.com%3A80&tr=udp%3A%2F%2Ftracker.ccc.de%3A80 Quote Link to post Share on other sites
Bento Posted October 9, 2012 Author Report Share Posted October 9, 2012 Check here: http://avic411.com/index.php?/topic/35365-usacanada-2011-q4-2012-navteq-maps-complete-guide/ Quote Link to post Share on other sites
petervandamned Posted October 13, 2012 Report Share Posted October 13, 2012 Thnks Bento upgrading my f900gt as we speak hopefully i will be able to have file melding again as yesterdag i got stuck and my 2009 version lost it on the upgrade Quote Link to post Share on other sites
kimln Posted October 14, 2012 Report Share Posted October 14, 2012 Just tried this on my f900bt, with no success. Followed the guide, but as i copy'ed the new MAP and POI folder to the iGO/Content folder, it said the item you are trying to copy, is larger than the size available on your disk. It will copy as much as possible. When done, i restarted my unit, and i got stuck on the main screen, with the message: System start-up in progress, please wait (or something like that) and it stayed there for a couple of minutes, before rebooting by itself. I would call it a boot loop. Should i delete some of the maps, so it wont complain about the size? I haven't upgraded my unit to 3.0 or 4.0, shut i? Grats Kim/Denmark Quote Link to post Share on other sites
Bento Posted October 14, 2012 Author Report Share Posted October 14, 2012 Delete the MAP and POI folders from the unit first and then copy the new folders over to the unit. This way there should be enough space available. If not, just delete some unused voices for example. I deleted all the russian, polish, french, spanish, german etc. voices. I never use them. You can also delete from .DEM files for the USA etc if they are on your unit. Quote Link to post Share on other sites
Bento Posted October 14, 2012 Author Report Share Posted October 14, 2012 Also, for TMC traffic information. You need to enable that and select a radio channel to get TMC info from (if i'm correct, I could be wrong, the Audi MMI navigation also works that way ) Quote Link to post Share on other sites
kimln Posted October 14, 2012 Report Share Posted October 14, 2012 Thanks for reply Quote Link to post Share on other sites
petervandamned Posted October 14, 2012 Report Share Posted October 14, 2012 Thnks Bento But radio 538 did work on my 2009 set-up Can't find the part now to enable this anymore ? Quote Link to post Share on other sites
trapier88 Posted October 15, 2012 Report Share Posted October 15, 2012 Hi, I try to unzip these files but it dont succeed in! What is the programm to use to unzip? Thanks a lot Quote Link to post Share on other sites
superbooster Posted October 15, 2012 Report Share Posted October 15, 2012 I have tried to install 'TeleAtlas 2012 Q1 Maps for Europe' on my AVIC F700BT, but my Flash Disk has insufficient space available (1.86Gb). Is it possible to install the MAP data on alternative location e.g. a SD card? Or is there another workaround? Quote Link to post Share on other sites
idude Posted October 16, 2012 Report Share Posted October 16, 2012 hai i'm a bit of a newbie: how does this upgrade differ from the official 2012 upgrade (navteq?), and if you install this hack, do you get the advanced app-mode? Quote Link to post Share on other sites
petervandamned Posted October 16, 2012 Report Share Posted October 16, 2012 Hi, I try to unzip these files but it dont succeed in! What is the programm to use to unzip? Thanks a lot Try winrar or winzip I have tried to install 'TeleAtlas 2012 Q1 Maps for Europe' on my AVIC F700BT, but my Flash Disk has insufficient space available (1.86Gb). Is it possible to install the MAP data on alternative location e.g. a SD card? Or is there another workaround? Second SD card after you started WIN CE should just work fine hai i'm a bit of a newbie: how does this upgrade differ from the official 2012 upgrade (navteq?), and if you install this hack, do you get the advanced app-mode? There are a lot of mods here. Make sure you read and understand the basics. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.