soze Posted October 15, 2012 Report Share Posted October 15, 2012 Anyone using the PAC Audio RP4-VW11 (RadioPro4) harness with their headunit? I've got an issue where the headunit is not staying turned on in the ACC key position (key still in ignition, but not in ignition position). It only turns on and stays on in the "ignition" position. I've connected the red wire on the RP4-VW11 unit to the ACC red wire on the headunit wiring. I thought that should be about it, but I guess not. The headunit turns on when I turn on the car, but as soon as I turn off the car and leave the key in ACC position, the unit turns off as well. I'm trying to have the headunit on in the ACC position so I can use it when parked without leaving the engine running. Oddly enough, I had an easier time doing the bypass than something seemingly as simple as this. Quote Link to post Share on other sites
soze Posted October 20, 2012 Author Report Share Posted October 20, 2012 UPDATE: So this is really more of an issue with the PAC Audio RP4-VW11 module. I've contacted them and will be heading over to their office to have it checked out. Will post update afterwards. Quote Link to post Share on other sites
jnmarshall Posted March 26, 2013 Report Share Posted March 26, 2013 I'm getting ready to install one of these this weekend. Did you get your issue resolved? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.