6ohh Posted February 8, 2007 Report Share Posted February 8, 2007 how do I take off the door panels to replace my front factory spkrs, also how do I get to the rears? Quote Link to post Share on other sites
cntrylvr79 Posted February 8, 2007 Report Share Posted February 8, 2007 I'm guessing you're talking about the truck in your sig. front speakers 1. Carefully unsnap front edge of window/door lock control panel, lift away, disconnect & remove. 2. Extract (1) 7 mm hex bolt from underneath. 3. Unsnap side mirror panel, lift away & remove. 4. Carefully unsnap door reflector & extract (1) 7 mm hex bolt from underneath. 5. Lift up door panel, lift away & remove. 6. Extract (4) 5-1/2 mm hex bolts securing speaker, lift away, disconnect & remove. rear speakers 1. Carefully unsnap front edge of window control panel, lift away, disconnect & remove. 2. Extract (1) 7 mm hex bolt from underneath. 3. Carefully unsnap door reflector & extract (1) 7 mm hex bolt from underneath. 4. Lift up door panel, lift away & remove. Quote Link to post Share on other sites
6ohh Posted February 14, 2007 Author Report Share Posted February 14, 2007 yup you got it right it is the one in my sig sorry my rear doors don't have spkrs they are in the bottom of the C pillar actually down by the floor beside the rear seat. that trim panal should just pop out right? Quote Link to post Share on other sites
cntrylvr79 Posted February 14, 2007 Report Share Posted February 14, 2007 Guess so, don't really remember for sure. Just remember if it doesn't seem like it's going anywhere when you go to pull it off, look for hidden screws, and other panels that might have to be removed first. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.