Jump to content


Photo

Undo Condi's Hack Mode

X930BT X940BT Z130BT Z140BT

  • Please log in to reply
43 replies to this topic

#16 jtlaidlaw

jtlaidlaw
  • Members
  • 4 posts

Posted 15 June 2014 - 11:20 PM

Thanks Lyverbe - I think you shared it last time (I was mistaken - not Europe).

 

Now - just drop it where?



#17 Lyverbe

Lyverbe

    Member

  • Members
  • 154 posts
  • LocationMontreal, Quebec, Canada

Posted 16 June 2014 - 09:59 PM

Thanks Lyverbe - I think you shared it last time (I was mistaken - not Europe).
 
Now - just drop it where?


USER\PRG\APL\

#18 jtlaidlaw

jtlaidlaw
  • Members
  • 4 posts

Posted 17 June 2014 - 11:19 AM

Thank you - am trying it today!  Hopefully success!



#19 jetjoe

jetjoe
  • Members
  • 8 posts

Posted 17 July 2014 - 10:49 PM

Hi Folks,

 

Just passing on my experience in updating my X940BT maps. It may help others although I'm not sure this is the best page to do so. I noticed that many have issues with reading the card, or the unit not seeing the card. I bought my update on Ebay. I've done this several times and always had good luck. This time, not so much.

 

I was in a hurry to get the update as I was intending to make a very long summer trip so I asked the seller if it was possible to download the files. Which after numerous emails came to pass. In unpacking the zip file on a brand new 4 gig card, a certain file threw up a error. Hitting the try again button it seemed to move on normally. But when I executed the upgrade, the unit hung with a box stating the wrong card was installed and to insert the correct card. It simply hung right there with no option but to restart the unit which then produced what most here referred to as a "bricked" unit. I was nervous to say the least.

 

To make this as short as possible, I believe my problem was simply the formatting of the SD card. With NTSF which is how this new card came, the unit would not see it at all. With FAT, it hit the same error message and the unit would hang at the same point. Once I formatted the card to FAT32, the files unpacked normally and the unit started and upgraded normally.

 

I have not seen many posts mentioning the card formatting. I think it is critical. Pioneer apparently hasn't got around to the modern file structures yet. Hopefully this helps.

 

By the way. The update I purchased on Ebay is exactly identical to the update offered on this site. Right down to the brief instructions.  So, pay attention folks.



#20 tomthumbs632

tomthumbs632
  • Members
  • 3 posts

Posted 18 July 2014 - 04:01 PM

HI,

 

I have a X930BT updated to X940BT and had the 2013 map installed. I crapped by installing condi's hack 2.21. Stuck with "there is no applicable program". Can I fix this by just following the 2013 map update http://avic411.com/i...-maps-download/ ?



#21 tomthumbs632

tomthumbs632
  • Members
  • 3 posts

Posted 22 July 2014 - 03:11 PM

Nvm,

 

Used Condi1.4 and renamed the PGRx.FLG in USER folder to PGR.FLG.



#22 DAHOPRO

DAHOPRO
  • Members
  • 10 posts
  • LocationGREENSBORO NC

Posted 25 July 2014 - 01:10 PM

Ok heres da problem i was having issues wit my z120bt shutting down and restartin tried to super test mode didnt realize da condi hack was in da download loaded on my unit now i got da dreaded "there is no applicable program" message on da screen did what everybody was say do just cant paste da new folder to my user file on my unit da paste button is blocked out cant select it please help i use my truck every day cant keep listenin these cds in it need my saalite radio back lol 



#23 kronen033

kronen033
  • Members
  • 12 posts

Posted 19 September 2014 - 06:00 PM

Hello,

 

I have a problem in the last step when I try to copy the file from the microSD card to the AVIC, I can select the file and choose the option "copy" and when I try to "paste" it in the AVIC, the "paste" option is not available.

 

Any idea about what am I doing wrong?

 

Thanks



#24 Lyverbe

Lyverbe

    Member

  • Members
  • 154 posts
  • LocationMontreal, Quebec, Canada

Posted 19 September 2014 - 10:04 PM

Perhaps

Hello,
 
I have a problem in the last step when I try to copy the file from the microSD card to the AVIC, I can select the file and choose the option "copy" and when I try to "paste" it in the AVIC, the "paste" option is not available.
 
Any idea about what am I doing wrong?
 
Thanks


Make sure you have the latest TESTMODE.key file. It can be found in some thread (aka search!)

#25 kronen033

kronen033
  • Members
  • 12 posts

Posted 20 September 2014 - 08:29 AM

I don't know how, but i've done it and I have solved the problem, the AVIC is already working!!!!!!!!!!!!

 

I managed to copy and paste the file, I think doing it the same way I did it yesterday but today it worked.

 

Thanks Lyverbe for your huge help, without it I wouldn't have been able to solve the problem.



#26 om1230

om1230
  • Members
  • 2 posts

Posted 04 December 2014 - 04:58 AM

I just got the "there is no applicable program" screen after running Condi's hackmode 2.x. After doing a search, I didn't find a concise means of reverting back so I disected the installer and came up with the following:

Using Super TestMode

As with any mods to your AVIC, the following is at your own risk.
I was successful doing the following on my X930BT (updated to X940BT)

Step 1
From a PC create 2 directories on a SD card:
PRG0 and PRG1
Copy the Super Testmode.KEY to the root of the SD card

Step 2
With the SD card in your AVIC boot into Testmode
VERIFY THAT THE FOLLOWING FILE EXISTS: USER\PRG0\APL\AV1.EXE
If it doesn't, do not continue!
COPY USER\PRG0\APL\AV1.EXE and then paste into the PRG0 directory on the SD card
If the following files exist:
COPY USER\PRGx.FLG to the SD card
COPY USER\PRG1\APL\AV1.EXE and then paste into the PRG1 directory on the SD card
Turn off your AVIC and take the SD card back to your PC

Step 3
From your PC
Rename PRG0\AV1.EXE to AV.EXE
If the following files exist:
Rename PRGx.FLG to PRG.FLG
Rename the PRG1\AV1.EXE files to AV.EXE

Step 4
With the SD card in your AVIC boot into Testmode
DELETE the following files on your AVIC
USER\PRG0\APL\AV.EXE
USER\PRG1\APL\AV.EXE
USER\PRG0\APL\AV.MSCR
USER\PRG0\APL\COMMCTR1.DLL
USER\PRG0\APL\CORED1.DLL
USER\PRG0\APL\KILLPROC.EXE
USER\PRG0\APL\MORTSCRIPT.EXE
USER\PRG0\APL\TOOLHEL1.DLL

COPY the following files from the SD card to your AVIC
SD\PRG0.AV.EXE to USER\PRG0\APL\AV.EXE
If the following files exist:
SD\PRG.FLG to USER\PRG.FLG
SD\PRG1.AV.EXE to USER\PRG1\APL\AV.EXE

If you have followed the above exactly, your AVIC should be back to the way it was before the HACKMODE

I did everything step by step and still wont past the first screen I need help please

#27 bog_cro

bog_cro
  • Members
  • 2 posts

Posted 18 February 2015 - 09:21 PM

hello i've just buy an f930bt and the owner forgot the password, so i tried to found it with hackmode 2.21 but now i have just the first screen on my unit somebody can help me please, i'm from belgium



#28 gweny

gweny
  • Members
  • 3 posts

Posted 21 February 2015 - 08:15 AM

After install of Condi's Hack Mode, my f30bt didn't want to boot anymore.

 

Here is a modified script for uninstalling this hackmode.

Put these files on an usb or sd drive and start your device. :)

 

 

gweny

Attached Files



#29 bog_cro

bog_cro
  • Members
  • 2 posts

Posted 28 February 2015 - 02:17 PM

thank you i remove it but my unit still not running just the screen image 



#30 avicBC

avicBC
  • Members
  • 2 posts

Posted 13 March 2015 - 06:34 AM

After install of Condi's Hack Mode, my f30bt didn't want to boot anymore.

 

Here is a modified script for uninstalling this hackmode.

Put these files on an usb or sd drive and start your device. :)

 

 

gweny

gweny - Man, thanks so much for posting this fix!!! Worked like a charm on Condi's hack mode which I had to use to recover my password in a recent re-install of my x930bt....   Struggled with it for a while and I am not a computer dummy :x , but there is something about Win CE that makes me say brrrrr! Owe you, dude! 







0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users