Jump to content
AVIC411.com

2013 EU UPDATE F30 F930 F9310 F40 F940 F840 F8430


Recommended Posts

2013 European Map Update for AVIC-F30BT, AVIC-F930BT, AVIC-F9310BT, AVIC-F40BT, AVIC-F940BT, AVIC-F840BT, AVIC-F8430BT and some older models.

 

I have uploaded the files here:

 

http://www.4shared.com/rar/mwirjwPQ/pioneer_2013_updatepart1.html

 
The password for the archives is:
 
openmeup2013
 

 

Special thanks to Pionara for the crack which can be found here:

 

http://avic411.com/index.php?app=core&module=attach&section=attach&attach_id=15552

 

Couldn't have done it without his skill.

 

 

For those who are wanting to run this on other earlier headunits then try this cardinfo file that Travolta supplied:

 

http://avic411.com/index.php?app=core&module=attach&section=attach&attach_id=15554

 

So far it's confirmed on a F20 headunit so may work on others.

 

 

Any of the above try at your own risk, I am in no way responsible if you brick your headunits.

 

20130710_171408_zpscf0579bb.jpg

 

 

 

INSTRUCTIONS (supplied by Travolta)


To do the update on an F930BT you just have to:

01) Download the files from the links above.
02) Extract them to a safe place.
03) Open the extracted folders and go into the Update folder
04) Replace the VERINFO.DAT with the above one.
05) Copy everything you extracted onto a clean 4GB+ SD Card which has been FAT32 Complete Formated
(make sure that the files and folders on the root of the SD card are:


FIRMWARE (folder)
Update (folder)
CARDINFO.cif


06) Put it in your Car (with the engine running or on a charger etc)
07) The Pioneer will ask you if you want to run the update choose ((yes)) the device will reboot and start the update.
08) Wait untill the update is completed
09) Once completed, it may ask you to update again, if so, select ((No)).
10) If you want to update your Bluetooth firmware then, enter Bluetooth settings and update the bluetooth firmware.

Please be sure that you did everything as mentioned above. It's better to make a backup of your system before updating.

 

For those with Avic F10BT,  F20BT or F920Bt

Download the CARDINFO.CIF from above.

 

OR

 

Open the original CARDINFO.CIF in text editor, search and replace this:

 

KJJARRH8R51UX72EUR

 

With

 

X07EURX27EURX30EUR

 

If you did everything correctly, you will have your AVIC updated to version 5.0 with the newest Europe Maps

 

 

TIPS

 

You have to apply the update before you can do any modding to remove nag screens etc. All system files have to be original.

Backup your TTS language files if you use anything other than English files before flashing as you may lose them and they revert to English.

 

If you didn't backup your TTS files some of you may be lucky. Frisk has created a thread listing a few of the TTS files.

Can be found here: http://avic411.com/index.php?/topic/37449-get-your-tts-files-backup-for-avic-f930btf940bt-here/

Link to post
Share on other sites
  • Replies 444
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

2013 European Map Update for AVIC-F30BT, AVIC-F930BT, AVIC-F9310BT, AVIC-F40BT, AVIC-F940BT, AVIC-F840BT, AVIC-F8430BT

 

I have uploaded the files here:

 

http://www.4shared.com/rar/mwirjwPQ/pioneer_2013_updatepart1.html

 
The password for the archives is:
 
openmeup2013

 

Special thanks to Pionara for the crack which can be found here:

 

http://avic411.com/index.php?app=core&module=attach&section=attach&attach_id=15552

 

Couldn't have done it without his skill.

 

20130710_171408_zpscf0579bb.jpg

 

I purchased the original update files and am happy to share. However if you wish to donate a SMALL contribution to help towards the updates it would be gratefully received.

hello, I've tried installing it on my F10BT and I think I have to change some ahcer any file. Could you tell me how could I do?

Link to post
Share on other sites

hello, I've tried installing it on my F10BT and I think I have to change some ahcer any file. Could you tell me how could I do?

Hi, take attached CARDINFO.Cif

Or

Open the original in text editor, search and replace this:

 

KJJARRH8R51UX72EUR

 

With

 

X07EURX27EURX30EUR

 

It will work, flashed my F20 this morning on my way to work and it worked like a charm.

CARDINFO.zip

Link to post
Share on other sites

Hi, take attached CARDINFO.Cif

Or

Open the original in text editor, search and replace this:

 

KJJARRH8R51UX72EUR

 

With

 

X07EURX27EURX30EUR

 

It will work, flashed my F20 this morning on my way to work and it worked like a charm.

 

Added to first post. Thank you.

Link to post
Share on other sites

Hi Guys,

 

 

Thank you very much for the files.

If i unpack the 5 files i get one update 3,37 gb, right?

in that update is a verinfo.dat. 

Do i need to replace the verinfo.dat with the one from pionara?

than i put all the files on a 4 gb sd card and put it in the unit and the install starts automatically?

Maybe its a good idea, to make a guide for dummies? just like last year?

 

Again, thank you very much.

Link to post
Share on other sites

@PUG

 

here are the instructions, you can put them in the first post.

 

INSTRUCTIONS


To do the update on an F930BT you just have to:

01) Download the files from the links above.
02) Extract them to a safe place.
03) Open the extracted folders and go into the Update folder
04) Replace the  VERINFO.DAT with this one.
05) Copy everything you extracted onto a clean 4GB+ SD Card which has been FAT32 Complete Formated
(make sure that the files and folders on the route of the SD card are:


FIRMWARE (folder)
Update (folder)
CARDINFO.cif


06) Put it in your Car (with the engine running or on a charger etc)
07) The Pioneer will ask you if you want to run the update choose ((yes)) the device will reboot and start the update.
08) Wait untill the update is completed
09) Once completed, it may ask you to update again, if so, select ((No)).
10) If you want to update your Bluetooth firmware then, enter Bluetooth settings and update the bluetooth firmware.

Please be sure that you did everything as mentioned above. It's better to make a backup of your system before updating.

 

For those with Avic F10BT,  F20BT or F920Bt

Download this  CARDINFO.CIF

 

Open the original CARDINF.CIF in text editor, search and replace this:

 

KJJARRH8R51UX72EUR

 

With

 

X07EURX27EURX30EUR

 

If you did everything correctly, you will have your AVIC updated to version 5.0 with the newest Europe Maps.

 

Regards

Link to post
Share on other sites

If you continue having issues maybe try downloading again in case the files corrupted during download.

I do not do well the steps to download. File pulsel primerocuando 4shared dredirecciona you to a page where you must register, after registration, you have to press the button download, redirect you again, and then where it says free download 20 seconds. wait and you will leave the window to save. a greeting

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...