hooligans Posted March 23, 2014 Report Share Posted March 23, 2014 I attempted to update my nav software on my avic z140bh. I followed the instructions to a tee up to the point where i had to select "System uCom Write" i inadvertently pressed System uCom all Write. When i attempted to stop this it continued to write. Eventually i got an error message. I tried to remove sd but was unable to open screen. I removed battery cable and then reconnected but to no avail. Then the unit went black. I have not been able to revive it. I just checked fuse at rear of unit; it is o.k. Any and all suggestions welcome re: unbricking or removal of sd card. Thanks Quote Link to post Share on other sites
JohnK Posted March 24, 2014 Report Share Posted March 24, 2014 I had a bit of trouble opening the screen when I did my update. Did you try holding the open button continuously as the unit reboots? Quote Link to post Share on other sites
VW_Diesel Posted April 2, 2014 Report Share Posted April 2, 2014 Do you have any updates on this? Quote Link to post Share on other sites
jskwarek Posted February 22, 2015 Report Share Posted February 22, 2015 Any pdates on this? Mine is bricked after update as well. Quote Link to post Share on other sites
jskwarek Posted March 7, 2015 Report Share Posted March 7, 2015 Out with the old... Couldn't find any answers or get anything to work so I pulled the Pioneer and went with a new unit. I'll keep the Pioneer around for a little while to see if I can come up with anything, if I can't then to the trash it goes. Jason Quote Link to post Share on other sites
LSV8Crisis Posted October 31, 2016 Report Share Posted October 31, 2016 I'm looking for an answer to this issue as well. Anyone...? Quote Link to post Share on other sites
Alexei Navalny Posted October 31, 2016 Report Share Posted October 31, 2016 I'm looking for an answer to this issue as well. Anyone...? No need to spam this all over the place. Not going to get an answer any faster. Quote Link to post Share on other sites
LSV8Crisis Posted November 6, 2016 Report Share Posted November 6, 2016 No need to spam this all over the place. Not going to get an answer any faster. Whatever... This guy can fix avic's and can help... http://www.ebay.com/itm/REPAIR-FIX-SERVICE-PIONEER-AVIC-Z140BH-AVIC-Z150BH-AVIC-Z130BT-AVIC-Z120BT-/330910590069?rmvSB=true Quote Link to post Share on other sites
Ispot Posted September 16, 2017 Report Share Posted September 16, 2017 Whatever... This guy can fix avic's and can help... http://www.ebay.com/itm/REPAIR-FIX-SERVICE-PIONEER-AVIC-Z140BH-AVIC-Z150BH-AVIC-Z130BT-AVIC-Z120BT-/330910590069?rmvSB=true You keep posting this link all over the place and the link is dead. Your guy no longer exist. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.