Jump to content

Official AVIC NEX Bypass (AVIC NEX Units Only)

Recommended Posts

bypass - does not work on AVH-4x00NEX devices.
only for AVIC of all versions NEX.
for 4000/4100/4200 the check was only for the parking brake(PKB)

For the AVH-4400NEX in Pioneer did a double check of PKB\SPEED

Share this post

Link to post
Share on other sites

8200Nex. I did the parking brake green to ground wire and pressed the lower left corner.  Confirmed it worked for me. 

Share this post

Link to post
Share on other sites

I applied the software bypass to my 8200 NEX unit and grounded the parking brake and it appears to have worked, but there is some weird behavior.

Before I get started. I'm a computer hardware/software engineer and I work in the enterprise storage/server space on linux kernel modules and embedded systems so my background in this field is strong.

I intermittently get the "Parking brake misconfigured" message and I suspect I know the reason.  It seems like I get this message whenever the car starts moving before the head unit has fully booted. My explanation of this has to do with the NEX boot loader on the radio and non-volatile configuration settings.

I believe that the software bypass feature is read from non-volatile storage somewhere during the boot procedure of the radio. This means that by default the radio starts to boot with the bypass disabled, and at some point during the boot procedure the unit reads the software setting out of their non-volatile storage. This would explain the behavior I have seen with the "Parking brake misconfigured" message appearing whenever I start driving the car before the radio is finished booting.

I'll keep paying attention to the behavior and if something changes I'll update my hypothesis. 



Share this post

Link to post
Share on other sites

I just posted in another thread about this & wondered if the 8200 has the same configuration as my 8100.  The installation instructions direct to connect the green wire to the powered side of the parking brake switch, which is opposite from all the advice I received when having issues similar to yours.

I abandoned the green wire and did the bypass as instructed in this section of this site.


Edit; I had similar issues when moving before boot and nag screen "OK" when my green wire was grounded.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now