Sebas718 Posted April 26, 2014 Report Share Posted April 26, 2014 I connect my iPhone through USB and APP thing shows greyed out with an X. Quote Link to post Share on other sites
tekki Posted April 26, 2014 Report Share Posted April 26, 2014 Connect to usb1 with hdmi with digital av connector using hdmi and lightning cable, go into settings,then smartphone setup on the nex and chose digital av adapter, download the app, make sure your phone is unlocked so u can click allow on your phone and you should be up and running,download any other apps you chose to use. In waze on your phone you have to go to settings and set it to allow external device Quote Link to post Share on other sites
Sebas718 Posted April 26, 2014 Author Report Share Posted April 26, 2014 Can you send me link of the cable i need i can't find one Quote Link to post Share on other sites
Sebas718 Posted April 26, 2014 Author Report Share Posted April 26, 2014 the 5000 doesn't have a hdmi port, i think. i confused Quote Link to post Share on other sites
drenyce311 Posted April 26, 2014 Report Share Posted April 26, 2014 did you download the appradio app on your phone?? Quote Link to post Share on other sites
drenyce311 Posted April 26, 2014 Report Share Posted April 26, 2014 The 5000nex doesnt have HDMI port. So you need to connect the phone to USB1 for Iphones. And download the app. The app will not work if you dont have the appradio app installed. I really dont think you need the Pioneer cable which is just a lightning cable. Quote Link to post Share on other sites
scotty3x3 Posted April 26, 2014 Report Share Posted April 26, 2014 Kind of curious how AppRadio mode would work without an hdmi adapter on the iPhone. The hdmi provides the video through to the head unit and I don't know which apps you could take advantage of without video. I'm thinking (and this is just a theory as I haven't researched it) that you WOULD need a special pioneer cable. A buddy of mine has a 4S and he bought the cable that has USB and the yellow pioneer plug on one end and 30pin on the other. They also sell a cable like this with lightning instead of 30pin I believe and I would think you would have to use that to get the AppRadio mode working. I have the AppRadio app and when I set the unit to USB and plug in lightning to USB1 on the radio, I do not have access to AppRadio mode. Quote Link to post Share on other sites
tekki Posted April 26, 2014 Report Share Posted April 26, 2014 I believe u need the lightning cable for iPhone 5 and the RGB CABLE, u have to look in the installation manual, it could be called VGA CABLE, And the apple adapter Quote Link to post Share on other sites
Admiral.Marith Posted April 29, 2014 Report Share Posted April 29, 2014 I just had a 5000 nex installed on Sunday. I'm unable to get appradio to work with my iphine 5. When the phone is connected. The main screen shows a blue App icon with a white x in the upper left. Touch screen does nothing there. Navi and other functions work. The unit came with a USB extension cable but it was too short to get to where I wanted it (I have a 2002 Toyota avalon). I used a black 10 foot belkin USB to lightning cable to get the necessary reach into my center console/armrest cubby. I also had another cable run from the second USB out to the center console using a micro USB cable, as my phone has a battery case that uses a micro USB connector. It's apple certified and I can do a wire sync to my mac with that case on the phone. Bluetooth works. Connecting to either USB cable (with/without the battery case on) works. Music plays. It pulls album artwork. The phone functions are there when the bluetooth connection is on. (Not when on either cable, with bluetooth off - I don't know if that's normal). I went through the setup screen and set up the phone per documentation. I have the appradio app installed on my phone, along with car browser app and and car media player app (which I found through the app radio app) When I press the apps button, there are no apps present. Is there something special about the CD-IU52 cable mentioned in the installation manual that you need the mothership cable or is this really just USB out the back of the unit? Any insight is appreciated. -Marith Quote Link to post Share on other sites
tekki Posted April 30, 2014 Report Share Posted April 30, 2014 I just had a 5000 nex installed on Sunday. I'm unable to get appradio to work with my iphine 5. When the phone is connected. The main screen shows a blue App icon with a white x in the upper left. Touch screen does nothing there. Navi and other functions work. The unit came with a USB extension cable but it was too short to get to where I wanted it (I have a 2002 Toyota avalon). I used a black 10 foot belkin USB to lightning cable to get the necessary reach into my center console/armrest cubby. I also had another cable run from the second USB out to the center console using a micro USB cable, as my phone has a battery case that uses a micro USB connector. It's apple certified and I can do a wire sync to my mac with that case on the phone. Bluetooth works. Connecting to either USB cable (with/without the battery case on) works. Music plays. It pulls album artwork. The phone functions are there when the bluetooth connection is on. (Not when on either cable, with bluetooth off - I don't know if that's normal). I went through the setup screen and set up the phone per documentation. I have the appradio app installed on my phone, along with car browser app and and car media player app (which I found through the app radio app) When I press the apps button, there are no apps present. Is there something special about the CD-IU52 cable mentioned in the installation manual that you need the mothership cable or is this really just USB out the back of the unit? Any insight is appreciated. -Marith You need to set smartphone setup as digital av adapter also You need the lightning to VGA adapter from apple and you also need the VGA cable from pioneer. forI iPhone (CD-IV202AV) (sold separa If you search the forum you will see the installation manual has been posted and it will show you what ya need. Quote Link to post Share on other sites
Admiral.Marith Posted April 30, 2014 Report Share Posted April 30, 2014 I find two similar items. Almost identical product numbers and descriptions Pioneer CDIV202NAVI AppRadio Mode VGA Interface Cable Kit for iPhone 5 Pioneer CDIV202AV AppRadio Mode VGA Interface Cable Kit for iPhone 5 Are these in fact the same thing? Quote Link to post Share on other sites
rwilimo Posted April 30, 2014 Report Share Posted April 30, 2014 I have an iPhone 5 with a 7000NEX, I went through all this hoopla to get the app mode to work and honestly it sucks, if I were to do it all again I wouldn't ever bother, I just use a lighting cable and I am very happy. The other consideration is that car play is coming at some point and we do not know how that is going to connect. I really wouldn't bother with app mode at this point IMHO Quote Link to post Share on other sites
tekki Posted April 30, 2014 Report Share Posted April 30, 2014 I find two similar items. Almost identical product numbers and descriptions Pioneer CDIV202NAVI AppRadio Mode VGA Interface Cable Kit for iPhone 5 Pioneer CDIV202AV AppRadio Mode VGA Interface Cable Kit for iPhone 5 Are these in fact the same thing? In looking at the cables there is no such connector on the back of the unit for the CDIV202navi "square connector"That angle square plug is not used for nex units per my conversation with pioneer. In the installation manual it shows CDIV202av Under accessories on web site it shows the same http://www.pioneerelectronics.com/PUSA/Car/Accessories/Smartphone-and-iPod-Cables/CD-IV202AV Quote Link to post Share on other sites
mikemaan Posted April 30, 2014 Report Share Posted April 30, 2014 I'm trying to get AppMode working with my iPad3 using a 30-pin digital av connector using hdmi / USB port 1 and it either: Doesn't do anything. Sometimes the app connects, but the radio doesn't. Sometimes the Radio connects but the app doesn't. Any suggestions? Is this just not meant to work? T.I.A. P.S. HDMI does mirror the iPad when in HDMI mode really well. Guess who's SlingBoxing to the NEX???? Quote Link to post Share on other sites
Admiral.Marith Posted April 30, 2014 Report Share Posted April 30, 2014 Thanks for all the info. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.