Jump to content


Photo

AVIC D3 Bypass with PICTURE!!!


  • Please log in to reply
383 replies to this topic

#16 Puddle Pirate

Puddle Pirate

    Member

  • Members
  • 43 posts

Posted 05 March 2007 - 03:28 AM

Thanks to all you guys who figured out the emergency brake work-around.

I will be having mine installed this week!! Pioneer was not any help when I contacted them with my application problem.

#17 VoBoy

VoBoy

    Member

  • Members
  • 29 posts

Posted 05 March 2007 - 06:34 AM

that's amazing guys! less than a week of its release and info to bypass is already floating around. cheers!

#18 evan

evan
  • Members
  • 2 posts

Posted 05 March 2007 - 08:47 PM

Anyone know if it has any effect on the bluetooth (CD-BTB100) module?

#19 evan

evan
  • Members
  • 2 posts

Posted 05 March 2007 - 08:51 PM

Nevermind, it's already been answered that it DOES NOT affect functionality of the bluetooth module.

http://www.avic411.c... ... 1629#31629

#20 Mannyman

Mannyman

    Member

  • Members
  • 56 posts

Posted 05 March 2007 - 08:57 PM

I opened up my console and fixed up all my ground wires with U shaped terminator connectors, to make the ground connection easier to secure (as opposed to bare wire). Now the bypass works perfectly for me as well, no cutoffs like before this time!

#21 Blizzard

Blizzard

    Member

  • Members
  • 65 posts

Posted 06 March 2007 - 03:22 PM

Hey guys - this may be another dumb newbie question..but I have to ask (before I destroy something like I usually do):

Do I forcefully pull out the MUTE wire from the harness...and then just stick it into the slot above it. I tugged on it a little bit, but it didn't seem to want to pull away...so i stopped.

Thanks for any and all guidance :)

#22 btappan

btappan

    Member

  • Members
  • 35 posts

Posted 06 March 2007 - 03:27 PM

Blizzard-

Thanks for asking the question that I had floating around in my head! Yep, to a complete novice what's the best way to remove that wire - and also how do we properly connect it to the new location?

#23 coocho

coocho

    Member

  • Members
  • 768 posts
  • LocationMitsubishi

Posted 06 March 2007 - 03:28 PM

No!!!!!!!!!! Dont rip it out. Use a small eyeglass screw driver or something and poke the metal tab sticking up. That tab on the crimp is what is keeping it in. Poke that down and it should be pretty easy to pull out that wire.
1995 Mitsubishi 3000GT VR-4 and SL
1995 Mitsubishi 3000GT VR-4 Spyder
1998 Chevy Covette (SOLD)
Z1 in the SL

#24 Blizzard

Blizzard

    Member

  • Members
  • 65 posts

Posted 06 March 2007 - 10:13 PM

Thanks coocho - I'll do as you say - thanks a ton...

#25 powa

powa

    Member

  • Members
  • 72 posts

Posted 07 March 2007 - 09:36 AM

sorry this may sound dumb, what what does it mean by "ground"?

Also so there are 2 things that need to be ground? the yellow black wire will be taken out and put in the top empty hole, and the other end of the wire put to the "ground" and also the hand brake?

sorry im a complete noob, please put me into the right place heh
Posted Image

#26 MisFit

MisFit

    Established Member

  • Members
  • 1784 posts
  • LocationN.J

Posted 07 March 2007 - 12:38 PM

you either didnt ground both wires or you put the mute in the wrong pin

#27 jaytrey

jaytrey

    Member

  • Members
  • 127 posts
  • Locationbaltimore, md

Posted 07 March 2007 - 06:50 PM

hey guys...got a question

i just spoke to an installer round my way...so far, he has given me the best pricing..200 or so. which beats 350. so..my problem is that he said there is no bypass for the d3 yet. he said that he just put one in his own and he has tried everything and it did not work.

at 1st, i did not believe him because i told him about you guys and i asked him what he did. and he told me he took the wire and stuck it in the empty slot right above it and it seemed like that is what you guys have been talking about. and he said that it did not work. he would love to do it to his, but he said there is nothing to bypass it yet.

can you guys give me a more detailed step by step breakdown for the bypass so i can show him or even guide him (god forbid) on how to do this.

he wants to do it for his own unit too. please help!! and since im cartechretarded, i duno how to explain it to him.

#28 coocho

coocho

    Member

  • Members
  • 768 posts
  • LocationMitsubishi

Posted 07 March 2007 - 07:03 PM

dont you still have to ground the parking wire?
1995 Mitsubishi 3000GT VR-4 and SL
1995 Mitsubishi 3000GT VR-4 Spyder
1998 Chevy Covette (SOLD)
Z1 in the SL

#29 jaytrey

jaytrey

    Member

  • Members
  • 127 posts
  • Locationbaltimore, md

Posted 07 March 2007 - 07:04 PM

yea, tat's that he said he did as well, he said that for the d1 and 2 that it was done like that but for the d3, it was not. he said he did the ground and moved the wire.

#30 whtcrxghst

whtcrxghst

    Established Member

  • Members
  • 4790 posts

Posted 07 March 2007 - 07:06 PM

Ask him if he grounded the wire in the open pin hole AND the light green parking brake wire. If it still doesn't work, find someone who knows what they are doing

hey guys...got a question

i just spoke to an installer round my way...so far, he has given me the best pricing..200 or so. which beats 350. so..my problem is that he said there is no bypass for the d3 yet. he said that he just put one in his own and he has tried everything and it did not work.

at 1st, i did not believe him because i told him about you guys and i asked him what he did. and he told me he took the wire and stuck it in the empty slot right above it and it seemed like that is what you guys have been talking about. and he said that it did not work. he would love to do it to his, but he said there is nothing to bypass it yet.

can you guys give me a more detailed step by step breakdown for the bypass so i can show him or even guide him (god forbid) on how to do this.

he wants to do it for his own unit too. please help!! and since im cartechretarded, i duno how to explain it to him.






2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users