Olivier Posted July 21, 2018 Report Share Posted July 21, 2018 Hi everyone, has anyone managed to change the time on the mrz05? I have used the generic testmode file that DZO posted here and managed to access the menu to set the dummy time. However, when i try to save the time that I have set, I get a "failed" message Does anyone knows what could be the cause? Cheers Quote Link to post Share on other sites
javed akhtar Posted July 24, 2018 Report Share Posted July 24, 2018 On 7/20/2018 at 7:49 AM, Jay8992 said: How do you change back to Japanese? Which menu settings? in navigation, you have the option of language, English or Japanese. But it only changes on the map, it does not change the language of menus. Quote Link to post Share on other sites
javed akhtar Posted July 24, 2018 Report Share Posted July 24, 2018 On 7/20/2018 at 1:10 AM, Jay8992 said: where to find it? Start reading from the very first page. Quote Link to post Share on other sites
javed akhtar Posted July 24, 2018 Report Share Posted July 24, 2018 (edited) On 7/21/2018 at 5:37 PM, Olivier said: Hi everyone,p has anyone managed to change the time on the mrz05? I have used the generic testmode file that DZO posted here and managed to access the menu to set the dummy time. However, when i try to save the time that I have set, I get a "failed" message Does anyone knows what could be the cause? Cheers Please describe how you are tring to change the time? however, Mr Ilnur has given a method in earlier posts. According to him power off the unit, remove the gps antenna, wait for 20 minutes. power up, the unit will not be able to get gps time, now you can set the time manually. there is also a video link. I have not tried it, if you succeed share it here so that all of us can benefit. Another method can be to change the time zone and time will become accurate automatically, but how to change time zone, I do not know. Best of luck. Edited July 27, 2018 by javed akhtar some more info Quote Link to post Share on other sites
Mwassaru Posted July 24, 2018 Report Share Posted July 24, 2018 On 7/20/2018 at 2:05 PM, dzo said: OK, Here's a first attempt at a translation for MRZ85. I can't test this so it may not work. Rename it to PF090JPJPN.LNG PF090JPJPN_85ENG.LNG Thanks DZO, will try and let you know if it works by saturday. Thank yu Quote Link to post Share on other sites
psgill Posted July 27, 2018 Report Share Posted July 27, 2018 can anyone explain how to do this on a mrz-099? Quote Link to post Share on other sites
javed akhtar Posted July 28, 2018 Report Share Posted July 28, 2018 21 hours ago, psgill said: can anyone explain how to do this on a mrz-099? See the post by Marcdane on page 32. Quote Link to post Share on other sites
Mwassaru Posted July 31, 2018 Report Share Posted July 31, 2018 On 7/24/2018 at 5:14 PM, Mwassaru said: Thanks DZO, will try and let you know if it works by saturday. Thank yu I tried the files but the translation again wasn't as accurate as expected. But again i realised that my MRZ85 is version 2.0 i think thats why the files may not be working. I just wish I could restore the original Japanese language so that i use google translate but I deleted the file long time ago.Am sucked up Quote Link to post Share on other sites
buta Posted August 1, 2018 Report Share Posted August 1, 2018 Hello, i downloaded autoupdater made by dzo, and tried to install it with mrz009 but there is nothing.... CAUTION TEST MODE FAILED STARTING, TURN OFF AC. i even dont know how to enter with this device in test mode. any ideas? Quote Link to post Share on other sites
Jay8992 Posted August 2, 2018 Report Share Posted August 2, 2018 On 7/23/2018 at 10:39 PM, javed akhtar said: in navigation, you have the option of language, English or Japanese. But it only changes on the map, it does not change the language of menus. Thanks for the help. Was able to change the radio language to english even tho is not everything change. What I want to know now is how to set the time for the clock. Help would be greatly appreciated. Thank you Quote Link to post Share on other sites
javed akhtar Posted August 2, 2018 Report Share Posted August 2, 2018 10 hours ago, Jay8992 said: Thanks for the help. Was able to change the radio language to english even tho is not everything change. What I want to know now is how to set the time for the clock. Help would be greatly appreciated. Thank you 10 hours ago, Jay8992 said: Thanks for the help. Was able to change the radio language to english even tho is not everything change. What I want to know now is how to set the time for the clock. Help would be greatly appreciated. Thank you Mr Ilnur has given a method in earlier posts. According to him power off the unit, remove the gps antenna, wait for 20 minutes. power up, the unit will not be able to get gps time, now you can set the time manually. there is also a video link. I have not tried it, if you succeed share it here so that all of us can benefit. Another method can be to change the time zone and time will become accurate automatically, but how to change time zone, I do not know. Best of luck. Quote Link to post Share on other sites
josek Posted August 2, 2018 Report Share Posted August 2, 2018 On 22/12/2016 at 18:57, ak1947 said: Hola Acabo de cambiar mi MRZ09 a la versión en inglés. Estoy tan feliz de haberlo logrado. Hay algunos pequeños ajustes necesarios, pero se ve muy bien sin embargo. Me dejas saber cómo haré estos ajustes y los tendré disponibles aquí. Gracias Good afternoon, I have a problem. I have in AVIC-MRZ09 in Japanese. I am trying to use the automatic installer, but when turning on it does not recognize the USB input, how to make it boot? Other pendrive recognizes without problems. Quote Link to post Share on other sites
josek Posted August 3, 2018 Report Share Posted August 3, 2018 On 2/11/2016 at 8:45 PM, dzo said: I've translated the Japanese language strings for the MRZ99 to English. I figured out the format of the LNG file, dumped the Japanese, translated all the strings using google translate, then rebuilt the file. Some of the English is not perfect but it makes the system much more usable. I've tested it with APP firmware version 3.070200 (installed with platform version 3.000600), other versions may not work. If the old language file is 93627 bytes long then this will almost certainly work. To install this, unzip the attachment mrz99english.zip and put the PF090JPJPN.LNG file on an sd card. (130905 bytes, md5sum is cb3f9cb76330704cc171e2b0acb9f6ad) Get into testmode by holding the NAVI button (left button with Japanese writing on it) and pressing right..left..right..left..right..left and then release NAVI. Go to the last entry on the first page (File Maintenance in Japanese) and press MENU (right button with Japanese writing on it) This opens the file manager which is in English and fairly obvious. Make a backup of /USER as described elsewhere on avic411.com Look in /USER to see if there is a file named PRG.FLG if there is, then the system uses /USER/PRG1, otherwise it uses /USER/PRG0 You can check the file versions by looking at /USER/PRGx/PF090APL.HTM (where x is 0 or 1 depending on PRG.FLG) go to /USER/PRGx/APL/LANGDATA/ delete PF090JPJPN.LNG go to /SD, copy the new PF090JPJPN.LNG and paste it into LANGDATA where the old one was. Switch off the power and when it restarts, it should be in English.... This worked for me but obviously is not 100% safe, be very careful in the file manager. Update: There's now an installer that also changes the background and most of the important images with japanese text. Find it here: https://github.com/dzo/mrz99/releases mrz99English_v2.zip Thanks a million, I followed the instructions step by step and almost everything was in English now. only remains to see if you can load the maps and other things, we will see if I can do it. Thank you!! Regards from Paraguay!! Quote Link to post Share on other sites
javed akhtar Posted August 3, 2018 Report Share Posted August 3, 2018 10 hours ago, josek said: Good afternoon, I have a problem. I have in AVIC-MRZ09 in Japanese. I am trying to use the automatic installer, but when turning on it does not recognize the USB input, how to make it boot? Other pendrive recognizes without problems. If you are having problems, you can replace the two files manually, as described in earlier posts. Quote Link to post Share on other sites
javed akhtar Posted August 3, 2018 Report Share Posted August 3, 2018 5 hours ago, josek said: Thanks a million, I followed the instructions step by step and almost everything was in English now. only remains to see if you can load the maps and other things, we will see if I can do it. Thank you!! Regards from Paraguay!! If you read the earlier posts, you will find that many have tried to load the maps but all have faced some problems. you can also try to install igo, maplorer, mapfactor navigator, navegis or navitel etc. you should also share your experience and problems so that others can help you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.