DriveNSK Posted September 3, 2019 Report Share Posted September 3, 2019 Hello! Was purchased Carrozerria AVIC RZ-77I went into the engineering menu (Thanks for the info on the forum), but I can’t do anything - the "Copy" and the rest are not active. (no TESTMODE.KEY)Does anyone have it? Please share The site writes that there are still similar models (AVIC-RZ06-2, AVIC-RZ55, AVIC-RW33, AVIC-RZ33, AVIC-RZ22)Has anyone been able to translate into English? (RZ-33 switches from the standard menu, as far as I know)Does anyone know what our European counterpart to this device is?I found this option: Switch to UC (??) Applied User Area Initialize ... After rebooting the device, the language has not changed.I tried all the options.After application, it is reset to the factory settings and the language is again Japanese. Quote Link to post Share on other sites
DriveNSK Posted September 3, 2019 Report Share Posted September 3, 2019 The menu itself looks like this: Does anyone have any information? Maybe someone has a dump of RZ-33? Quote Link to post Share on other sites
Shtirlitz Posted September 5, 2019 Report Share Posted September 5, 2019 0 Advanced issues found ▲ On 03.09.2019 at 7:52 PM, DriveNSK said: Hello! Was purchased Carrozerria AVIC RZ-77I went into the engineering menu (Thanks for the info on the forum), but I can’t do anything - the "Copy" and the rest are not active. (no TESTMODE.KEY)Does anyone have it? Please share The site writes that there are still similar models (AVIC-RZ06-2, AVIC-RZ55, AVIC-RW33, AVIC-RZ33, AVIC-RZ22)Has anyone been able to translate into English? (RZ-33 switches from the standard menu, as far as I know)Does anyone know what our European counterpart to this device is? ... Hi DriveNSK! I have AVIC RZ-09 and it looks very similar to RZ-77. I've spent about 2 weeks on investigations and for today I found: no easy way to make the device translation to English, but I think it possible by modding FW files I cannot find any similar model on the European market you can make the FW copy form the device easy - just use "Take out program" menu in test mode while SD-card inserted (FAT32 formatted, FW size about 500Mb) The folders structure looks like: NAVIVUP - AVICRZ09 -- APL -- DTV -- DTVDATA -- PALTFORM The FW and other internal data stored on the internal SD card. It is cyphered, I cannot make a copy under Win10 (I'll try to do it in *nix soon) The FW can be repacked using WM6.x tools and I'm trying to make the first patch to change time zone (Moscow std time instead of Japanese) Now I try to make repacked FW, but it is not too easy because for the payload of the main .PRG file (for RZ09 - PS140PLT.PRG) consists of unknown CRC checksum algorithm (for other FW files used plain CRC32B). May be DZO knows this secret Alex Quote Link to post Share on other sites
DriveNSK Posted September 5, 2019 Report Share Posted September 5, 2019 7 hours ago, Shtirlitz said: Hi DriveNSK! I have AVIC RZ-09 and it looks very similar to RZ-77. I've spent about 2 weeks on investigations and for today I found: no easy way to make the device translation to English, but I think it possible by modding FW files I cannot find any similar model on the European market you can make the FW copy form the device easy - just use "Take out program" menu in test mode while SD-card inserted (FAT32 formatted, FW size about 500Mb) The folders structure looks like: NAVIVUP - AVICRZ09 -- APL -- DTV -- DTVDATA -- PALTFORM The FW and other internal data stored on the internal SD card. It is cyphered, I cannot make a copy under Win10 (I'll try to do it in *nix soon) The FW can be repacked using WM6.x tools and I'm trying to make the first patch to change time zone (Moscow std time instead of Japanese) Now I try to make repacked FW, but it is not too easy because for the payload of the main .PRG file (for RZ09 - PS140PLT.PRG) consists of unknown CRC checksum algorithm (for other FW files used plain CRC32B). May be DZO knows this secret Alex Alex, thanks for the info! So far, I only understand the second week) I can’t copy anything - there are no "Copy" and "Paste" items. Do you have TESTMODE.KEY? WM6.x is Windows Mobile 6.x tools? I did not find the "Take out program" item in my menu Did you somehow connect the device to the PC?!?! Thanks in advance for the answers) Quote Link to post Share on other sites
Deliany Posted September 5, 2019 Report Share Posted September 5, 2019 Hello! Please tell me how to remove the security password at startup on avic rz55? Quote Link to post Share on other sites
Shtirlitz Posted September 5, 2019 Report Share Posted September 5, 2019 Quote Alex, thanks for the info! So far, I only understand the second week) I can’t copy anything - there are no "Copy" and "Paste" items. Do you have TESTMODE.KEY? WM6.x is Windows Mobile 6.x tools? I did not find the "Take out program" item in my menu Did you somehow connect the device to the PC?!?! Thanks in advance for the answers) Hi DriveNSK, I didn't find any correct TESTMODE.KEY for now: a have tried a lot of variants from this site and others but every time saw an error message "TESTMODE.KEY is incorrect". But I can see the Test modes keywords inside of the file "Testmode.exe". I'm not sure what the correct TESTMODE.KEY will open the "Copy" and "Paste" commands, further, the device file manager didn't access to files which contains the strings for translation - all of them inside of the main FW file PS140PLT.PRG. WM6.x - yes, the device is Windows Mobile 6.x based, and I found tools to get/repack files of the FW (dumpromx for extract/replace files, fdf2reg and reg2fdf for registry "default.fdf" file changing). "Take out program" is one of the menu items on the second or third screen of the TestMode menu on my RZ-09. I can make a screenshot for you tomorrow. My device cannot connect to PC, for navigation updates synchronization uses the SD card (you need to prepare it on the device first and after it uses the Smartloop SW - it in Japanese only). Alex Quote Link to post Share on other sites
Shtirlitz Posted September 6, 2019 Report Share Posted September 6, 2019 Hi All! FW backup instruction for AVIC-RZ09 (and similar devices - AVIC-RL09, AVIC-RW09, AVIC-RZ09, AVIC-RZ07, AVIC-RZ06, AVIC-RL05, AVIC-RZ05, AVIC-RW03, AVIC-RZ03): 1. Get SD card, FAT32-formatted. Probably the USB disk will work too, but I didn't check back up on USB. 2. Make the empty folder named "NAVIVUP" on SD card. 3. Power on the AVIC and place the SD card into AVIC device slot. 4. Go to in the Testmode (press and hold "NAVI" button, press each once right-left-right-left-right-left, release "NAVI" button - device restarted in test mode). 5. On the first screen - select menu "10. Program forced write", go to the next screen of this submenu (2 of 3) and select "3. Take out program". 6. Select destination "SD" or "USB" and press "MENU" for start downloading. 7. Wait for about minute while FW downloaded to SD/USD disk - with full-screen messages "!!NOW COPYING!!", while "HIT ANY KEY" message didn't appear. Profit) You can see the full-FW files on your SD/USB disk in the NAVIVUP folder. P.S.: Sorry guys but I cannot upload the screen-shots here, I see just "There was a problem uploading the file." message displayed. Alex Quote Link to post Share on other sites
DriveNSK Posted September 6, 2019 Report Share Posted September 6, 2019 2 hours ago, Shtirlitz said: Hi All! FW backup instruction for AVIC-RZ09 (and similar devices - AVIC-RL09, AVIC-RW09, AVIC-RZ09, AVIC-RZ07, AVIC-RZ06, AVIC-RL05, AVIC-RZ05, AVIC-RW03, AVIC-RZ03): 1. Get SD card, FAT32-formatted. Probably the USB disk will work too, but I didn't check back up on USB. 2. Make the empty folder named "NAVIVUP" on SD card. 3. Power on the AVIC and place the SD card into AVIC device slot. 4. Go to in the Testmode (press and hold "NAVI" button, press each once right-left-right-left-right-left, release "NAVI" button - device restarted in test mode). 5. On the first screen - select menu "10. Program forced write", go to the next screen of this submenu (2 of 3) and select "3. Take out program". 6. Select destination "SD" or "USB" and press "MENU" for start downloading. 7. Wait for about minute while FW downloaded to SD/USD disk - with full-screen messages "!!NOW COPYING!!", while "HIT ANY KEY" message didn't appear. Profit) You can see the full-FW files on your SD/USB disk in the NAVIVUP folder. P.S.: Sorry guys but I cannot upload the screen-shots here, I see just "There was a problem uploading the file." message displayed. Alex Hi AlexThe instruction is excellent, everything worked out.Made a copy (Just in case)Thanks again! Quote Link to post Share on other sites
Shtirlitz Posted September 6, 2019 Report Share Posted September 6, 2019 Hi DriveNSK, You are welcome) Can you share your FW with me (upload it to Google Drive for example)? I try to find tips and tricks of new WM-based AVICs firmwares. Thanx! Quote Link to post Share on other sites
DriveNSK Posted September 6, 2019 Report Share Posted September 6, 2019 10 minutes ago, Shtirlitz said: Hi DriveNSK, You are welcome) Can you share your FW with me (upload it to Google Drive for example)? I try to find tips and tricks of new WM-based AVICs firmwares. Thanx! Here is the linkhttps://yadi.sk/d/T4wUk2VJky6u_w If it doesn’t work out, let me know. I'll post it on Google Quote Link to post Share on other sites
Shtirlitz Posted September 6, 2019 Report Share Posted September 6, 2019 1 hour ago, DriveNSK said: Here is the linkhttps://yadi.sk/d/T4wUk2VJky6u_w If it doesn’t work out, let me know. I'll post it on Google I've downloaded it, thanks! It's funny)) Folder inside of the "NAVIVUP" named as "AVICRZ09" on your RZ77 device Pioneer's engineers place same compiled Testmode.EXE on all devices and don't mind it)) Quote Link to post Share on other sites
DriveNSK Posted September 6, 2019 Report Share Posted September 6, 2019 Shtirlitz If you didn’t say, I wouldn’t notice)I looked at the pictures, RL09 and RZ09 are visually similar (differ in screen size)The RW09 is even different in design.They probably have a common software platform.Model Linkhttps://jpn.pioneer/ja/carrozzeria/carnavi/rakunavi/avic-rl09_avic-rw09_avic-rz09/ ЗЫ: А ты с какой части мира? Quote Link to post Share on other sites
EnoKt Posted September 6, 2019 Report Share Posted September 6, 2019 On 6/23/2019 at 6:03 PM, EnoKt said: Hi everyone. I haven't yet got any hint for solving the above problem posted on page 47. Any assistance from this forum is welcome. I jump boosted a battery to start my car The AVIC MRZ09 shows the characters in Japanese shown below, translated ''there is no program'' with number 7 at the bottom right of screen. The USER/DIŔ shows no content Any help to revive this unit? I have original USER content backup and the English one from your previous posts. . I tried copying and pasting the backups to the USER folder but nothing happens or shows up. The Unit copies and pastes to any other media like FLASH DISC OR SD but does not paste in USER folder.. Any help to revive it.? Hi all of you. Todate I haven't got any solution to the above quoted case. Is there any one who had had a similar case and solved it?. I will appreciate if a solution is posted in this forum. I am sure I am not alone with this challenge. I guess it is not a hardware case but a software issue. Because the unit plays DVD audios but the screen remains as shown in the image above. I need your help please. Quote Link to post Share on other sites
DriveNSK Posted September 7, 2019 Report Share Posted September 7, 2019 21 hours ago, EnoKt said: I jump boosted a battery to start my car The AVIC MRZ09 shows the characters in Japanese shown below, translated ''there is no program'' with number 7 at the bottom right of screen. The USER/DIŔ shows no content Any help to revive this unit? I have original USER content backup and the English one from your previous posts. . I tried copying and pasting the backups to the USER folder but nothing happens or shows up. The Unit copies and pastes to any other media like FLASH DISC OR SD but does not paste in USER folder.. Any help to revive it.? Hi all of you. Todate I haven't got any solution to the above quoted case. Is there any one who had had a similar case and solved it?. I will appreciate if a solution is posted in this forum. I am sure I am not alone with this challenge. I guess it is not a hardware case but a software issue. Because the unit plays DVD audios but the screen remains as shown in the image above. I need your help please. I tried to google, but no results. It seems that this is only with you.It seems to me that your problem will be fixed only in the manufacturer’s service. But it is not exactly)P.S.Did you take TESTMODE.KEY from this forum or did you have it on the SD card from the kit? Quote Link to post Share on other sites
EnoKt Posted September 8, 2019 Report Share Posted September 8, 2019 23 hours ago, DriveNSK said: I tried to google, but no results. It seems that this is only with you.It seems to me that your problem will be fixed only in the manufacturer’s service. But it is not exactly)P.S.Did you take TESTMODE.KEY from this forum or did you have it on the SD card from the kit? Many thanks for your concern. I did enter TESTMODE by using switches. Got to File Maintenance, then to USER folder DIR where I found it empty. I got stuck there as I could not paste any file therein. I bought a used Nissan X-Trail from Japan which came with AVIC MRZ09 stereo but no SD card for it. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.