DriveNSK Posted October 21, 2020 Report Share Posted October 21, 2020 5 hours ago, tMrz said: Hey man, thanks for the reply. I think there is a gps antenna connected to my car but I don't think it is working. I see a black small box shaped next to front glass. I checked some settings in my radio and it showed me like 9 red sattelites instead of green ones. Any ideas how to switch that? I live in Cyprus, North side. Watch this video. Try to do the same. I hope it helps you) https://www.youtube.com/watch?v=-cEdovxMMfU Quote Link to post Share on other sites
DriveNSK Posted October 21, 2020 Report Share Posted October 21, 2020 18 hours ago, Schubawi said: Hi, I have the above backup, but cannot copy or paste , as these options do not appear on teh menu, am I doing something wrong? DZo, can you please advise? Is the testmode.key file correct? If it's not correct, you won't be able to copy or write. Try other files if the one you have doesn't work. Quote Link to post Share on other sites
tMrz Posted October 28, 2020 Report Share Posted October 28, 2020 On 2/26/2017 at 10:44 AM, dzo said: OK, it must be a completely different platform, the only thing I can suggest is that you try to make a testmode key using this: https://github.com/bassrock/AVIC-NEX/tree/master/TestKeys This is the newer format for testmode keys. You can also experiment to see if there is a key combination to get you into testmode. I took a look as the user manual for mrz099 and the UI is completely different to the mrz99 so it's very unlikely that anything here will be of use to you. Hey @dzo I am trying to get into my test mode with my AVIC RZ33 (2015, firmware at 2.0 something) but none of the keys that you posted in this thread works . I was searching this thread around and found out these perl files. How am I supposed to compile or use these files? Any help would be appriciated. Quote Link to post Share on other sites
serjeao Posted November 7, 2020 Report Share Posted November 7, 2020 On 11.11.2019 at 4:15 PM, Shtirlitz said: Hi, OK, here is the step-by-step manual: Step 1: Take out the FW, see here Step 2: Get the file named "PS140PLT.PRG". For RZ09 it is in folder NAVIVUP\AVICRZ09\PLATFORM\ Cut out 0x200 bytes from the start of the file: its header. I used the SFK-tool: sfk195x64.exe partcopy PS140PLT.PRG -allfrom 0x200 output.nb0 -yes When you need to extract file output.nb0 by the dumpromx.exe tool (easy to find it on this forum): mkdir DUMP dumpromx.exe -d DUMP -v -5 output.nb0 >output.txt As a result, you'll get a lot of FW files, and initDB.dat of course Step 3: Patch initDB.dat file. Use my sources, take translate.c and translation.txt, and see the code: const long OFFSET = 0x18C8D0L; // RZ09 1.04 0x18C8D0L; RZ77 2.07 = 0x1EA87CL const long BLOCK_LEN = 0xAF00BL; // RZ09 1.04 0xAF00BL; RZ77 2.07 = 0xB5CDFL These constants define the start and length-1 of the data block inside of the initDB.dat, correct it according to your header. Address stores in the little-endian bytes sequence: Go to the start of this data block offset: You can see the start of the Japanese strings data, its in UCS-2 LE codepage. The end of the data block at the end of the initDB.dat file: The address of the last data byte is 0x23B8DB. Use the calc for calculating the length-1 and insert it to translate.c source, and compile it. While running, the translate.exe search for initDB.dat and translation.txt in the current folder. After finishing the output file initDB_out.dat will be created. Step 4: Assemble the updated FW. Get makever.c and compile it. You can change the version if you need it, the current FW version in the PS140PLT.VER file. Replace initDB.dat in the FW by commands: copy /Y initDB_out.dat initDB.dat dumpromx.exe -a initDB.dat fw_104_src.nb0 You need to get the correct output, like this: img 00000000 : hdr=8d908c88 base=88471000 commandlineoffset=88471000 ERROR: could not find pointer for ofs 00000000 Successful file initDB.dat inserting initDB.dat.nb saved successfully If it OK, run the makever.exe by commands: del /Q fw_104.nb0 ren initDB.dat.nb fw_104.nb0 makever.exe mkdir NAVIVUP\AVICRZ09\PLATFORM copy /Y PS140PLT.PRG NAVIVUP\AVICRZ09\PLATFORM\PS140PLT.PRG copy /Y PS140PLT.VER NAVIVUP\AVICRZ09\PS140PLT.VER It creates the folders (NAVIVUP) and files for the AVIC's FW update. Step 5: Just place folder NAVIVUP on the SD and try to update your AVIC in a test mode. Use "Program forced write" menu and "Platform write" command, SD as a source. On Internal SD stayed the original Japanese FW if you want back to it. And be careful, do not power off the AVIC during updating, it can be bricked (or boot looped)!!! Good luck) Приветствую, не как не могу найти программу dumpromx.exe на форуме, если не сложно скажите где скачать. Quote Link to post Share on other sites
Milesh Posted November 30, 2020 Report Share Posted November 30, 2020 Any luck with AVIC EVZ05? TIA Quote Link to post Share on other sites
kiwi07 Posted December 10, 2020 Report Share Posted December 10, 2020 On 4/11/2019 at 6:05 PM, mrmwash said: Thank you DZO, will try it out and give feedback. It works! Thank you so much DZO... Hi mrmwash, I also have a C9P6 and copying PF090JPJPN.LNG did not work for me. So I am gonna try copying NA090JPMZD. which folder did you copy this file into, PRG0 or PRG1 ? Thanks in advance. Quote Link to post Share on other sites
alex3236 Posted January 21, 2021 Report Share Posted January 21, 2021 help with the image when you turn it on OPENING 5.bmp OPENING.bmp Quote Link to post Share on other sites
alex3236 Posted January 21, 2021 Report Share Posted January 21, 2021 3 minutes ago, alex3236 said: help with the image when you turn it on OPENING 5.bmp 1.15 MB · 0 downloads OPENING.bmp 1.15 MB · 0 downloads mrz77 PF090OPN Quote Link to post Share on other sites
NJC Posted January 25, 2021 Report Share Posted January 25, 2021 Good day! Is there any way that I can change to English language of my AVIC-MRZ06? Please help Quote Link to post Share on other sites
Sheik Posted February 8, 2021 Report Share Posted February 8, 2021 Can i get steps and code for language change on pioneer carrozzerria avic-mrz77 from japanese to English Quote Link to post Share on other sites
Sheik Posted February 8, 2021 Report Share Posted February 8, 2021 Please can i get language change for mrz77 Quote Link to post Share on other sites
MrOlega Posted February 14, 2021 Report Share Posted February 14, 2021 Hello everyone Tell me, how can I open the font file "DFHSMaruGothic.pgf"? The same font is found in "PF090PLT.PRG" and, taking it out, I found those extra intervals for Russian letters. But after removing the intervals in the font, I do not know how to put everything back together correctly... Всем привет! Подскажите, как можно вскрыть файл шрифта "DFHSMaruGothic.pgf"? Этот же шрифт лежит и в "PF090PLT.PRG" и, достав его оттуда, я обнаружил те самые лишние интервалы для русских букв. Но убрав интервалы в шрифте не знаю как собрать всё обратно правильно... Quote Link to post Share on other sites
steyn Posted April 1, 2021 Report Share Posted April 1, 2021 On 3/9/2019 at 6:16 PM, vadka610 said: I have a Mrz06 and thank you for the help with changing the language, but I would like to know how to play music videos from a SD card, it says I must use navi studio to add files to the card but it wont even allow me to register.... can someone help me with this? Can you please assist with how you changed the language on you MRz06 please. Quote Link to post Share on other sites
Bermudok Posted April 2, 2021 Report Share Posted April 2, 2021 Hello friends! Trying to mod AVIC evz05 troubled with I cannot find "dumpromx.exe" tool neither this forum nor all the web. Гугл с яндексом наперегонки несут бред и ссылки на этот форум и 4pda, где Штирлиц отсылает обратно на этот форум. need iq over 200 Please if you got this tool take me direct or cloud link. Thx to all helps Quote Link to post Share on other sites
Miwarei Posted May 26, 2021 Report Share Posted May 26, 2021 On 9/6/2019 at 5:43 PM, Shtirlitz said: Hi All! FW backup instruction for AVIC-RZ09 (and similar devices - AVIC-RL09, AVIC-RW09, AVIC-RZ09, AVIC-RZ07, AVIC-RZ06, AVIC-RL05, AVIC-RZ05, AVIC-RW03, AVIC-RZ03): 1. Get SD card, FAT32-formatted. Probably the USB disk will work too, but I didn't check back up on USB. 2. Make the empty folder named "NAVIVUP" on SD card. 3. Power on the AVIC and place the SD card into AVIC device slot. 4. Go to in the Testmode (press and hold "NAVI" button, press each once right-left-right-left-right-left, release "NAVI" button - device restarted in test mode). 5. On the first screen - select menu "10. Program forced write", go to the next screen of this submenu (2 of 3) and select "3. Take out program". 6. Select destination "SD" or "USB" and press "MENU" for start downloading. 7. Wait for about minute while FW downloaded to SD/USD disk - with full-screen messages "!!NOW COPYING!!", while "HIT ANY KEY" message didn't appear. Profit) You can see the full-FW files on your SD/USB disk in the NAVIVUP folder. P.S.: Sorry guys but I cannot upload the screen-shots here, I see just "There was a problem uploading the file." message displayed. Alex Hi Shtirlitz, Here didn't available submenu "3. Take the program out" on menu "Program force write" in my device Avic-ZH0077. Here only... 1. HDD & Plat Write 2. Platform write Please help on this regard, it will be highly appreciated. Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.