SHAWNSTER Posted August 3, 2018 Report Share Posted August 3, 2018 @dzo my avic-mrz99 keeps turning on an off every couple seconds.. i tried your language fix and it worked thanks much but can you help??? i thinking it the firmware need reinstalling or some thing Quote Link to post Share on other sites
dzo Posted August 3, 2018 Report Share Posted August 3, 2018 2 hours ago, SHAWNSTER said: @dzo my avic-mrz99 keeps turning on an off every couple seconds.. i tried your language fix and it worked thanks much but can you help??? i thinking it the firmware need reinstalling or some thing One thing you can try is to delete or create an empty file called "PRG.FLG" in /USER, this will swap to the other application firmware installation but it won't help if the problem is with the base OS. Also, if you start up the unit in engineering testmode, there are some tests it can run but you'll need google translate on your phone to navigate the menus. Quote Link to post Share on other sites
serg_nestor1985 Posted August 4, 2018 Report Share Posted August 4, 2018 Hello. There was a problem with my carrozzeria mrz07. When i turn it on the morning - black screen and a line of Japanese in the center. And in the lower right corner is the number 06. Turned it off and turned it on again - after that the screen does not turn on at all, but it seems like it flashes black every 3 seconds approximately. The rear view camera also works, it also flashes. The panel opens if you press the button for a long time. The service mode does not enter. Until then, it was not turned on (no source selected), so I can not say whether it's playing or not. I know that the radio plays in the service mode. The case took place in the south, it was hot, could this happen from heating? Help please. Quote Link to post Share on other sites
serg_nestor1985 Posted August 4, 2018 Report Share Posted August 4, 2018 Sorry for text, it is Android. Quote Link to post Share on other sites
ishlevi Posted August 5, 2018 Report Share Posted August 5, 2018 19 hours ago, serg_nestor1985 said: Hello. There was a problem with my carrozzeria mrz07. When i turn it on the morning - black screen and a line of Japanese in the center. And in the lower right corner is the number 06. Turned it off and turned it on again - after that the screen does not turn on at all, but it seems like it flashes black every 3 seconds approximately. The rear view camera also works, it also flashes. The panel opens if you press the button for a long time. The service mode does not enter. Until then, it was not turned on (no source selected), so I can not say whether it's playing or not. I know that the radio plays in the service mode. The case took place in the south, it was hot, could this happen from heating? Help please. i also have the same problem try to solved it but no success.no program it reads and on the rufht side corner 7 .try to copy user prg1 prg0 but can't paste it,i.e not able to paste USER.but NDATA successfully copy& pasted.please help Quote Link to post Share on other sites
SHAWNSTER Posted August 5, 2018 Report Share Posted August 5, 2018 On 8/3/2018 at 5:04 AM, dzo said: One thing you can try is to delete or create an empty file called "PRG.FLG" in /USER, this will swap to the other application firmware installation but it won't help if the problem is with the base OS. Also, if you start up the unit in engineering testmode, there are some tests it can run but you'll need google translate on your phone to navigate the menus. Thanks. I got it fix by deleting all user data and clearing the ram. I was an option in the test mode. How can I change the background?? If possible Quote Link to post Share on other sites
buta Posted August 5, 2018 Report Share Posted August 5, 2018 has anyone did it for carrozzeria avic zh0009? my friend has it on japanese Quote Link to post Share on other sites
fanhoi Posted August 7, 2018 Report Share Posted August 7, 2018 On 24.12.2017 at 14:04, CameronR said: On 23.12.2017 at 06:16, ichanner said: Я просто нашел эту страницу очень счастливой, чтобы увидеть, что сделали вы, ребята. У меня есть японский AVIC MRZ-009 Я надеялся, что это же устройство, что и MRZ09, но это не У шахты нет левых и правых кнопок (см. Изображение ниже) Я попытаюсь выяснить, как войти в тестовое меню без кнопок влево и вправо, но любая помощь будет оценена Я ожидаю, что эта модель также позволит изменить язык. ------------------------ Я в такой же ситуации. Ни один из ключей тестового режима не работает, и нажатие кнопки не приводит к тому, что MRZ009 переходит в тестовый режим! Если кто-то решил это, пожалуйста, поделитесь. благодаря! Кнопки Select, Copy, Paste, Delete не доступны, нужен на флешку файл testmode.key без него редактирование не будет доступно. Buttons Select, Copy, Paste, Delete are not available, you need the file testmode.key without it there is no editing. I can not find the file, it does not fit from other models((( Quote Link to post Share on other sites
buta Posted August 7, 2018 Report Share Posted August 7, 2018 7 hours ago, fanhoi said: Кнопки Select, Copy, Paste, Delete не доступны, нужен на флешку файл testmode.key без него редактирование не будет доступно. Buttons Select, Copy, Paste, Delete are not available, you need the file testmode.key without it there is no editing. I can not find the file, it does not fit from other models((( Tak zhe sdelal, no pishet turn off acc Quote Link to post Share on other sites
fanhoi Posted August 7, 2018 Report Share Posted August 7, 2018 4 hours ago, buta said: Testmode.key нужен для mrz009 от других моделей выходит сообщение ошибки. Где взять файл не знаю, уже перепробовал штук 30перепробывал. Testmode.key is needed for mrz009 from other models an error message is output. Where to get the file I do not know, have already tried pieces 30properbyval Quote Link to post Share on other sites
serg_nestor1985 Posted August 10, 2018 Report Share Posted August 10, 2018 On 04.08.2018 at 4:30 PM, serg_nestor1985 said: Hello. There was a problem with my carrozzeria mrz07. When i turn it on the morning - black screen and a line of Japanese in the center. And in the lower right corner is the number 06. Turned it off and turned it on again - after that the screen does not turn on at all, but it seems like it flashes black every 3 seconds approximately. The rear view camera also works, it also flashes. The panel opens if you press the button for a long time. The service mode does not enter. Until then, it was not turned on (no source selected), so I can not say whether it's playing or not. I know that the radio plays in the service mode. The case took place in the south, it was hot, could this happen from heating? Help please. Can someone suggest this is a problem in software or something with power? It seems to me that the matter is in the food, since the rear view camera worked with this. And after disconnecting the radio from the power supply settings reset and the camera stopped working. Quote Link to post Share on other sites
buta Posted August 12, 2018 Report Share Posted August 12, 2018 On 8/10/2018 at 9:11 PM, serg_nestor1985 said: Can someone suggest this is a problem in software or something with power? It seems to me that the matter is in the food, since the rear view camera worked with this. And after disconnecting the radio from the power supply settings reset and the camera stopped working. you should turn it on from setting, there is an option to turn on/of rear view camera Quote Link to post Share on other sites
Rizee1 Posted August 12, 2018 Report Share Posted August 12, 2018 On 12/19/2016 at 4:06 PM, dzo said: This isn't easy, the date and time are obtained from the GPS and there's no obvious way to change the timezone. It may be possible to set the time if you unplug the gps antenna but I haven't tried this. One way to hack the timezone would be to change the dll that reads the time to add an offset. Hi DZO If you are still here. I would like to know on how to set the date and time on mrz77 please. Thx Quote Link to post Share on other sites
Allantin Posted August 17, 2018 Report Share Posted August 17, 2018 Hi , first i want to give thanks dzo for his work here. About the problem i have.My radio is the Avic-mrz09. I deleted by mistake some files from the USER directory as i was trying to delete the Japanese file for the language.I cant remember the names or numbers.Now the radio .It plays normal as before but it doesn't show any letters. Can someone upload the whole directory of USER to replace them ? Quote Link to post Share on other sites
TuTuL Posted August 17, 2018 Report Share Posted August 17, 2018 On 3/20/2018 at 3:32 PM, javed akhtar said: Many people including me, have already changed MRZ05 to english. You only need to read, understand and apply the procedure carefully. Can you please make a video of how you did it and share with us? thank you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.