fergalb Posted February 11, 2015 Report Share Posted February 11, 2015 Ok I think I have the first part done My next SD card is looking like this "I think thats right" I'll try it tomorrow and fingers crossed it will work. Thanks again for your help guizmo I owe you a pint. Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 Hi yes it's the good way after copy your map,poi,building with total commander and it's be ok Quote Link to post Share on other sites
fergalb Posted February 12, 2015 Report Share Posted February 12, 2015 I think I have a problem I cant seem to be able to find apl2 or igo in my flash disk, any ideas where it could be. Thanks Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 ok take this link and copy all files inside your avic it's for european unit https://drive.google.com/file/d/0B4MAukIOceEXY1FYUEtOeUdtN1k/view?usp=sharing it's my flash disk copy them inside your avic (only refresh map,poi,building ) Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 if you don't like red color of menu this in chrome color take this file and copy them inside apl folder of your avic https://drive.google.com/file/d/0B4MAukIOceEXYWhHcHJTaEpjT28/view?usp=sharing Quote Link to post Share on other sites
fergalb Posted February 12, 2015 Report Share Posted February 12, 2015 Ok after another day in the car I'm nearly there and it's looking good. But after a few min's the system startup came on and it went back to the blue screen switching on and off between the two I thought this was just updating so I left it for an hour and a half and still no change, I had to turn off the car then as I was getting low on fuel should I leave it run longer tomorrow or is this a problem. Thanks again hopefully I can leave you alone soon. Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 hi take this link is 2 different voices in uk put them in a sd card with testmode and copy them inside your flash disk open apl2 and igo content and the folder voices and copy inside https://drive.google.com/file/d/0B4MAukIOceEXc3djTE41b0w1d00/view?usp=sharing https://drive.google.com/file/d/0B4MAukIOceEXSjV4Y3lpbFFCVFk/view?usp=sharing after this take this link and copy them inside your avic with testmode open apl2 and after igo and content and lang and copy inside https://drive.google.com/file/d/0B4MAukIOceEXYjYyeW9IeGFWOWs/view?usp=sharing i use only french voice it's the reason for the avic don't have the files Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 take the 2 winces files inside the folder lpue080 copy them alone in your sd card and do the blue screen and choice 1 read sd card and after reading it's gone be ok Quote Link to post Share on other sites
pacomasi Posted February 13, 2015 Report Share Posted February 13, 2015 Thank you guizmo works perfect One last question where I can find the updated files speed cam spain? thanks Quote Link to post Share on other sites
guizmo Posted February 13, 2015 Report Share Posted February 13, 2015 Hi it's easy register in site poiplaza choice speedcam and igo text format and copy the files inside your avic on folder speedcam Quote Link to post Share on other sites
pacomasi Posted February 13, 2015 Report Share Posted February 13, 2015 Hello I registered in poiplaza page and have gotten the file in txt format with copy TestMode disappears palicación but rather leaves me no speedcam. is that what I'm doing wrong the spedcam who had jobs were in SPdb format thanks Quote Link to post Share on other sites
guizmo Posted February 13, 2015 Report Share Posted February 13, 2015 delete spdb file inside your folder of speedcam when the avic restart he create new spdb file and he integrate your new speedcam Quote Link to post Share on other sites
pacomasi Posted February 14, 2015 Report Share Posted February 14, 2015 the avic did not create any spdb file. I just get a file named SpeedcamUpdates.spud Quote Link to post Share on other sites
guizmo Posted February 14, 2015 Report Share Posted February 14, 2015 try to poiplaza in another format try igo8 text Quote Link to post Share on other sites
fergalb Posted February 14, 2015 Report Share Posted February 14, 2015 I'm still having problems this is my flash drive and igo folder am I missing something here. I'm not great with computers and this is melting my brain plus my calibration is off making things very tricky. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.