xxxegoxxx Posted June 8, 2006 Report Share Posted June 8, 2006 I dont know if this has ever been answered, but I installed the N2 into my 95 jeep grand cherokee and everytime I start up the car and the radio turns on, I get the message about the parking brake. I have the parking brake going to a ground through a switch and that seems to work fine, except for the message. Does it take awhile for this system to set itself up to the install or something? Quote Link to post Share on other sites
Guest Posted June 8, 2006 Report Share Posted June 8, 2006 Did you already do the r197 bypass? Quote Link to post Share on other sites
xxxegoxxx Posted June 8, 2006 Author Report Share Posted June 8, 2006 actually no not yet. i'm going to swing by radio shack and get that tracer pen so i dont have to worry about the whole saudering thing. Quote Link to post Share on other sites
Guest Posted June 8, 2006 Report Share Posted June 8, 2006 I did it with the tracer pen too. It takes less than 5 minutes and you're ready to go. I've had my n2 installed with the bypass forover 2 months now, and never a problem. Quote Link to post Share on other sites
BigCountry06 Posted June 11, 2006 Report Share Posted June 11, 2006 hey guys could you please tell me how you did the bypass, i just installed one in my bro's 2000 Accord, and everything works fine, i tried a bypass i bought off ebay, it ties into the Red and black, then it splits the parking brake wire, and the speed sensor(vss) wire...and thats it..., works fine and shows the PB is on, but after a few minutes, if your going over like 5mph then screen pops up with that screen, and only lets you hear the dvd, but if you go back under 5mph, the picture comes back on???....Please help, i could always undo this bypass and do another if there is a better please help...Thanks, Clay... Quote Link to post Share on other sites
BigCountry06 Posted June 11, 2006 Report Share Posted June 11, 2006 hey guys could you please tell me how you did the bypass, i just installed one in my bro's 2000 Accord, and everything works fine, i tried a bypass i bought off ebay, it ties into the Red and black, then it splits the parking brake wire, and the speed sensor(vss) wire...and thats it..., works fine and shows the PB is on, but after a few minutes, if your going over like 5mph then screen pops up with that screen, and only lets you hear the dvd, but if you go back under 5mph, the picture comes back on???....Please help, i could always undo this bypass and do another if there is a better please help...Thanks, Clay... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.