chill903 Posted April 8, 2007 Report Share Posted April 8, 2007 Service Provider: Cingular Phone-SW : Palm Treo750 Auto conect: Yes Basic Function: (Make & Recieve a call tested. Call logs work.) Phone Book Transfer: Yes. Can push entire phone book. Voice Calling: Yes. Signal & Battery Strength Indicator: yes / yes BT Audio Capable?: Yes CAVEAT: The Treo does not connect with the CD-BTB200 out of the box. You must download the software from: http://www.jetwaremobile.com and enable all the bluetooth features. If this works for you, the software costs ~$15. Money well spent to enable all the bluetooth features of WM5. EDIT: Voice dialing tested, call logs tested... Quote Link to post Share on other sites
Soprano Posted April 11, 2007 Report Share Posted April 11, 2007 Service Provider: Verizon Phone: Blackberry RAZR V3c SW Version: Auto-Connect: Yes Basic Function: Yes Phone Book Transfer: No Voice Calling: No audible sounds, but sometimes takes the commands Signal & Battery Strength Indicator: Yes / Yes BT Audio Capable: Not sure Thanks to Verizon for crippling Bluetooth on their damn phones and their shitty interface. My firmware only supports OBEX and not OPP (object push), so no transferring of contacts. I also can't figure out how to manually add a phone contact in the D3. Is this even possible? Also caller ID doesn't seem to work. Quote Link to post Share on other sites
chazmink Posted April 12, 2007 Report Share Posted April 12, 2007 Service Provider: Cingular (The new AT&T) Phone: Motorola ROKR E1 SW Version: R373..G..DE.30.34R..A Auto-Connect: Yes Basic Function: Yes Phone Book Transfer: Only if you push phonebook from phone, one at a time Voice Calling: Not tested Signal & Battery Strength Indicator: Yes / Yes BT Audio Capable: Unknown Quote Link to post Share on other sites
gvaughan Posted April 12, 2007 Report Share Posted April 12, 2007 Service Provider: Cingular Phone: Motorola L7 (unlocked european version) SW Version: R4513_G_08.B7.DCR_RB Auto-Connect: No must confirm connection from phone each session Basic Function: Must initiate calls from phone but D3 mic/speakers work Phone Book Transfer: Only if you push phonebook from phone, one at a time Voice Calling: No Signal & Battery Strength Indicator: Yes / Not sure BT Audio Capable: No I can connect manually from phone phone is registered, but phone won't go offhook or dial when controlled from the D3. If I take or place the call from the handset's keypad I can talk handsfree through the D3. Next time I get in the car I have to connect again manually from the handset. Both ends are set to autoconnect. UPDATE: This phone works GREAT after updating the software with some I found at Modmymoto.com (Moto Beauty Update 1). Voice dialing= yes, autoconnect=yes, basic function=yes. No bt audio and contacts must be p ushed one at a time. Quote Link to post Share on other sites
leo Posted April 12, 2007 Report Share Posted April 12, 2007 Service Provider: T-Mobile Phone: Samsung-T519 SW Version: ? Auto-Connect: Yes (have to turn authorize on at phone) Basic Function: yes can call from d3 or phone Phone Book Transfer: No - havent tried to push single contact Voice Calling: have not tried Signal & Battery Strength Indicator: No BT Audio Capable: Not sure Initially the phone was connecting fine but only communicating with partial functionality. I called crutchfield tech support and was told to switch the BUS cable from in to out...and then everything worked. I think they mislabeled the bus connectors on this unit or my phone is whacked. Sound quality is great...mic is amazing - great system...if i could only get my phone book over and text I would be SO happy - but am satisfied now Quote Link to post Share on other sites
Itchy Posted April 12, 2007 Author Report Share Posted April 12, 2007 Service Provider: Verizon Wireless Phone: Motorola V710 SW Version: ? Auto-Connect: NO! Basic Function: yes can call from d3 or phone Phone Book Transfer: NO! No way to push object or send V Card Voice Calling: have not tried Signal & Battery Strength Indicator: Yes/Yes BT Audio Capable: No Quote Link to post Share on other sites
mrrogers1 Posted April 12, 2007 Report Share Posted April 12, 2007 I am testing with a PPC-6700 and will report back. I am installing the "jet" software right now..... Stay tuned.... THIS JUST IN! Service Provider: Sprint Phone-SW : HTH PPC-6700 Auto connect: Yes Basic Function: (Make & Recieve a call tested. Call logs work.) Phone Book Transfer: Yes. Can push entire phone book. Voice Calling: Yes. Signal & Battery Strength Indicator: yes / yes BT Audio Capable?: Yes CAVEAT: Same as with the Treo, the PPC-6700 does not connect with the CD-BTB200 out of the box. You must download the software from: http://www.jetwaremobile.com and enable all the bluetooth features. If this works for you, the software costs ~$15. Money well spent to enable all the bluetooth features of WM5. Quote Link to post Share on other sites
mobiletrance Posted April 12, 2007 Report Share Posted April 12, 2007 Service Provider: T-Mobile Phone: Nokia E61 (Cingular version: Nokia E62) SW Version: 3.0633.09.04 - Dated: 20-11-06 Auto-Connect: Yes (Set as authorized on phone) Basic Function: Call from D3 or E61 Phone Book Transfer: Yes (ALL - Select Mark All and Send via BT) Voice Calling: Yes Call History Log: Yes Signal & Battery Strength Indicator: No BT Audio Capable: No Quote Link to post Share on other sites
mlammert Posted April 16, 2007 Report Share Posted April 16, 2007 I have posted this to another thread, but I will post it hear as well... This is a PDF with US phone compatibility and PAIRING and TRANSFER instructions for the D3 and various phones... I found this deep within the bowels of the Pioneer web site... Good luck, Mark Bluetooth Compatibility Guide.pdf Quote Link to post Share on other sites
LeonPhelps Posted April 17, 2007 Report Share Posted April 17, 2007 Service Provider: Fido/Rogers Phone: Nokia E65 SW Version: 1.0633.18.01 Auto-Connect: Yes (Set as authorized on phone) Basic Function: Call from D3 or E65 Phone Book Transfer: Yes (ALL - Select Mark All and Send via BT) Voice Calling: Yes Call History Log: Yes Signal & Battery Strength Indicator: No BT Audio Capable: No Quote Link to post Share on other sites
mlammert Posted April 17, 2007 Report Share Posted April 17, 2007 Service Provider: T-Mobile Phone: Motorola v600/i (I know it's old) SW Version: n/a Auto-Connect: Yes (played with this for about 30 min before I figured it out wish I could remember the exact steps I used) Basic Function: Call from D3, Answer from D3 Phone Book Transfer: Yes (One at a time - anybody know how to do whole book???) Voice Calling: Yes Call History Log: Yes Signal & Battery Strength Indicator: Yes/No BT Audio Capable: No Quote Link to post Share on other sites
agryphon Posted April 23, 2007 Report Share Posted April 23, 2007 Motorola RAZR V3i (unlocked European version) on Cingular Motorola V600 on ATT / Cingular Able to pair and use both phones. Sounds good, seems to work fine EXCEPT: Trying to use voice dial functions on the phones. Voice prompts from the phone have volume so low, it's almost inaudible. Turning up the volume on the AVIC all the way produces barely audible prompts. Same problem with both phones. I have checked every setting I can find on the phone. Voice prompt volume is perfect with a bluetooth headset, but I guess the BTB200 uses a different profile? Spoke with Pioneer tech support, they claim it's most likely the phone, but he was going to check with engineering and call me back. Anyone else see this problem or have it working? Maybe there is a volume setting that I have missed? Quote Link to post Share on other sites
mlammert Posted April 23, 2007 Report Share Posted April 23, 2007 Motorola RAZR V3i (unlocked European version) on CingularMotorola V600 on ATT / Cingular I was previously using a Motorola v600 on T-Mobile and was also getting some very odd behavior... I did not experience the volume issue... But, when using the v600 the D3 would NOT stay on BT-TEL when I would receive a phone call... I could make a call fine... But, when I would receive one, the audio source would automatically start playing again when I answered the phone... The other person could hear the music but I could not hear them and they could not hear me talking... Crutchfield was going to send me a new BT200 unit... However, a friend of mine and I tried everything with a different phone and it worked flawlessly with a different phone... Definitely had something to do with the v600... So, I ended up getting a Razor v3 for $25 and all is working great now... Weird... Mark Quote Link to post Share on other sites
agryphon Posted April 23, 2007 Report Share Posted April 23, 2007 And your voice dial prompts are loud enough to be heard? Quote Link to post Share on other sites
mlammert Posted April 23, 2007 Report Share Posted April 23, 2007 I have not tried yet... I will let you know... Mark Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.