Jump to content
AVIC411.com

bypassing the harness for Toyota Tundra


Recommended Posts

Hello,

 

Just purchased a avic-d3 and having trouble with bypassing. The orginal harness was not used for our vehicle which is Toyota Tundra. There is no yellow/black wire in the harness that was installed. I tried bypassing the green wire that goes to the emergency brake it worked but when you reach a certain speed it shuts down. Any help would be appreciated

 

Thanks,

 

Paatr3

Link to post
Share on other sites

If I understood you correctly, you are saying the original harness for the D3 was not used? I didn't know that was possible.

 

If you are saying you did not use the original Toyota harness, you are looking at the wrong wires. The yellow/black "mute" wire is on the D3 harness, I believe the same one with the RCA. You should see it in the corner. Take it out, and plug it into the one above, then ground. Presto

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...