image Posted June 23, 2007 Report Share Posted June 23, 2007 Hey guys i just got my d3 in from pioneer. I previously owned a d3. I notice this radio doesn't come with even a cage! My question is, Im going to buy the double din dash kit off of crutchfield, but do i need the cage from pioneer's (ADT-VA133) kit to make my install successfull? Any feedback would be greatly appreciated. Thank you! Quote Link to post Share on other sites
hottwhyrd Posted June 23, 2007 Report Share Posted June 23, 2007 no the dash kit should be and "iso" mount meaning it has screw holes that line up with the screw holes on the pioneer have fun if u hava mach system!!! Quote Link to post Share on other sites
image Posted June 23, 2007 Author Report Share Posted June 23, 2007 oh cool i thought it might be iso i just wasnt sure. Yea my mach system is already rewired. Im using a 450/4 in my stang. THanks Quote Link to post Share on other sites
necro Posted June 23, 2007 Report Share Posted June 23, 2007 Yeah, no need for an extra kit from pioneer. I have an 03 stang and the one from crutchfield fits perfectly. Just use the two screws up front and your good. Quote Link to post Share on other sites
image Posted June 23, 2007 Author Report Share Posted June 23, 2007 awesome. Thanks. Im wiring the harness right now. This will look in my cobra. much better than my N3 that banged against the ac controls. Quote Link to post Share on other sites
forcefedcobra Posted June 30, 2007 Report Share Posted June 30, 2007 nice. I'm hooking up one in my 03 cobra too. Post up some pics when you are done. Quote Link to post Share on other sites
image Posted June 30, 2007 Author Report Share Posted June 30, 2007 lol i think ive seen you on the svtp thread. Quote Link to post Share on other sites
forcefedcobra Posted June 30, 2007 Report Share Posted June 30, 2007 LOL! Image. I didnt even look at your handle on here. LOL! Just picked up some stuff to wire it up. Now I am just waiting on my metra harness to show up on Monday so I can get it all done. Quote Link to post Share on other sites
image Posted June 30, 2007 Author Report Share Posted June 30, 2007 its all good my nigga. My kit will be in Tuesday I will take pics. letme know if you have any problems wiring it. I used to be a installer. Quote Link to post Share on other sites
forcefedcobra Posted June 30, 2007 Report Share Posted June 30, 2007 I have all the colors and pin numbers for the vss and reverse wires so I can tap into them. Other than that I just need to make sure that I properly install a 2.2k resistor into the amp on line so I dont get the amp thump (per someones suggestion on here). I guess just solder that little resistor into the wiring? Oh and as long as the metra kit comes with a wiring diagram then I should be good. I have a good gameplan I think atleast. LOL! Quote Link to post Share on other sites
image Posted June 30, 2007 Author Report Share Posted June 30, 2007 your on the right track! I rewired my car and used a JL audio 450/4 so i didnt need to do that. Quote Link to post Share on other sites
forcefedcobra Posted June 30, 2007 Report Share Posted June 30, 2007 I would have gone that route but just spent a wad on fuel mods and new clutch setup so I can turn the boost up on the whipple. Quote Link to post Share on other sites
image Posted June 30, 2007 Author Report Share Posted June 30, 2007 lol i just bought a KB 2,2 a few days ago and Im about to buy some level 5 halfshafts. God this hobby is getting expensive.----- Quote Link to post Share on other sites
forcefedcobra Posted June 30, 2007 Report Share Posted June 30, 2007 Yes it is. If you dont trust me ask my wife. LOL! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.