gmillz Posted February 24, 2015 Report Share Posted February 24, 2015 Im looking at getting the unit 8100 but i would like to know how is the video bypass are we using a relay or a pin movement or no can do Quote Link to post Share on other sites
epsilonkore Posted February 24, 2015 Report Share Posted February 24, 2015 Go to the root of the NEX forum and look at the very first pinned thread "Official AVIC NEX Bypass (AVIC Units Only). Two methods, software (easy) and electrical (via a pin movement). That thread shows it all. Quote Link to post Share on other sites
CatholicJedi Posted February 24, 2015 Report Share Posted February 24, 2015 I just grounded the wire and did the software method: Step 1 ground parking brake wire Step 2 turn power on push main menu button (bottom center)Step 3 push AV icon (bottom center)Step 4 on AV icon screen push off button (towards bottom)Step 5 touch quadrant 4 (half inch in and half inch up from left lower corner of touch screen) hold your finger there for about 10-12 seconds. "set on" icon will appear that means you are done. source: http://avic411.com/index.php?/topic/38589-official-avic-nex-bypass-avic-units-only/ Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.