Jump to content
AVIC411.com

Hi beams and my X920 bt


Recommended Posts

This is a hard one to figure out. I have a 2009 Malibu (non Bose) I installed my X920 bt last week and everything worked great. Yesterday I installed my amp and sub and everything was working great until last night when I left work and put my hi beams on and the radio went nuts. So this is what I get I start the car and everything is good and when I use the hi beams it turns the sound off I still get the beep and it shows the volume going up but no sound. If I go from radio to XM I can get a little sound out of one of the speakers. The only way to get everything back is to reboot the system by turning off the car and restarting. This is what I have found so far if I unplug the RCA;s from the amp everything is good but no sound from the sub. This hole setup was from my other car and worked good. One thing I was thinking was is that the RCA cable that I'm using is just a cheep one for like a home stereo and I also have HID headlights in both hi and low beams. If I pull into my garage and my auto head light come on the same thing happens so that means the low beam will do it as well. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...