Kolobo Posted April 12, 2015 Report Share Posted April 12, 2015 Hello, Fellows! Recently I bought a new car with a Pioneer avicF930bt system. Unfortunately there was a password after doing a firmeware update for the radio. :/ So lukily Condi's HackMode v2.21 worked perfectly fine and i could remove the password! So i thought... okay time for the removal using this uninstaller by gweny: http://avic411.com/index.php?/topic/36854-undo-condis-hack-mode/page-2&do=findComment&comment=330314 But now i have the same problem as hlekinfr. I have a loading screen but nothing else... I cannot install Condi's HackMode v2.21 again or load the uninstaller ... Strangely i can update the firmware... Can someone help me?!!!!!!! maybe it's a problem because I installed Condi's HackMode v2.21 but used an uninstaller for version 2.1 ?!!! HELP!!! and thanks a lot! Quote Link to post Share on other sites
hlekinfr Posted April 19, 2015 Report Share Posted April 19, 2015 Hello you shoult try this : http://avic411.com/index.php?/topic/36854-undo-condis-hack-mode/ Quote Link to post Share on other sites
Kolobo Posted May 24, 2015 Author Report Share Posted May 24, 2015 Oh thanks! I'll try that. Quote Link to post Share on other sites
Kolobo Posted May 25, 2015 Author Report Share Posted May 25, 2015 Ok, instead of what hlekinfr suggested above I tried something else. By searching the forum I found another post by hlekinfr uploading his X9310BT user backup folder (http://avic411.com/index.php?/topic/80807-moderators-please-remove-condis-hackmode-v221/?hl=%2Bsuper+%2Btestmode&do=findComment&comment=331750). By going to http://home.comcast.net/~cinful75/x9310bt/ I used the supertestmode to boot into maintenance. I copied all the folders/datas from my avic-f930bt on the sd-card (I finally made a backup by this). Then i compared prg0 und prg1 at the X9310BT user backup to point out what was different/missing compared to my f930bt prg0 and prg1. So prg0 and prg1 have to have basicly the same folders and datas so I coypied from prg0 to prg1 what was missing (if you have the same issues try to find out whats different with your avic, maybe you have to do it a little bit different) and deleted the old av.exe replacing it with the av.exe from X9310BT user backup. After that I copied everything to my sd, booted into testmode, replaced the folders (don't forget to unmount the sd) and booted anew. Finally I can use my avic before the trouble I had with gwenys hackremoval. At this point I would like to recommend everyone who wants to delete/rewrite the password to use the supertesmode!! It's all you need and it's less trouble!! Quote Link to post Share on other sites
400kv Posted June 8, 2015 Report Share Posted June 8, 2015 Kolobo, could you send me your backup for f930bt. Quote Link to post Share on other sites
Lyverbe Posted June 8, 2015 Report Share Posted June 8, 2015 It's all you need and it's less trouble!! At this point I would like to recommend everyone who wants to delete/rewrite the password to use the supertesmode!! I've been trying to get the destructive HackMode v2.21 deleted from this site ever since I've been here. There's a reason for that. Quote Link to post Share on other sites
MarlboroMan Posted September 17, 2015 Report Share Posted September 17, 2015 I need help with my F930BT, it doesnt boot after using hackmode. At least i use REMOVE HACKMODE and still "there is no applicable program" on display. hope you can help....please step by step, i am not a specialist and .... my english is very bad, i´m from germany Quote Link to post Share on other sites
MarlboroMan Posted December 20, 2015 Report Share Posted December 20, 2015 still the same problem. no one can help? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.