Jump to content
AVIC411.com

F910BT - Full backup fimware


Recommended Posts

Hello all,

 

My F910BT Pioneer has stopped working alone, I put a testmode sdcard, and I check the contents of myflashdisk, there were only 5 or 6 file and no folder, someone could send me the full backup of F910BT or a compatible firmware.

 

Thanks in adavance

Link to post
Share on other sites
hi take a sd card and decompress this link

 

https://drive.google...iew?usp=sharing

 

inside this folder you have a floder nammed plt inside you have 2 winces files copy them outside the folder lpue080 

 

now in your sd card you have folder lpue080 and the copy of 2 winces files 

 

1)put the sd card inside your avic  turn on your avic 

 

2) do this press the 3 touch in the same time (menu,map,eject) +with stylet press reset 

 

when the screen was black retire the stylet ,the screen be blue retire your fingers of 3 touch

 

3)the avic try a code do this (with joystick up,down,touch menu,left,right) to  confirm press the center of joystick 

 

4)you'll be in the menu select first line press center of joystick to confirm the choice 

 

and select format with sd mmc 

 

5) when the avic finish (message restart your device 100% writing ) turn off your avic 

 

and restart your avic with sd card inside your device 

 

6) the screen be white and avic read your sd card let him finish when the avic read 100% files and restart turn off your avic 

 

 

after  take this link decompress him it's the folder my flash disk 

https://drive.google...iew?usp=sharing

 

and this link is testmode take him and decompress 

 

https://drive.google...iew?usp=sharing

 

 

1) now put in your sd card my flash disk and next testmode 

 

put the sd card inside your avic and turn on your device 

 

open total commander at the right side open storage card  and at the left side open your flash disk  copy all files inside your flash disk of your storage card 

 

when you finish the copy do this take this link decompress and  take the 2 winces files inside the folder plt and copy them alone in a sd card 

 

https://drive.google...iew?usp=sharing

 

 

now put the sd card on your avic and do the code in the blue screen 

 

 

 do this press the 3 touch in the same time (menu,map,eject) +with stylet press reset 

 

when the screen was black retire the stylet ,the screen be blue retire your fingers of 3 touch

 

the avic try a code do this (with joystick up,down,touch menu,left,right) to  confirm press the center of joystick 

and select the first line  after select  read sd mmc  (no format only read)

 

when the avic finish 100% writing  turn off your avic retire the sd card and restart everything be ok 

 
Link to post
Share on other sites
  • 1 month later...

 

open total commander at the right side open storage card  and at the left side open your flash disk  copy all files inside your flash disk of your storage card 

 

when you finish the copy do this take this link decompress and  take the 2 winces files inside the folder plt and copy them alone in a sd card 

 

Do you mean you put the files from the lect hand page into the right hand page or visa versa?

So is it:

files in "your flash disk" >> "Storage card"

or

Files in "storage card" >> "your flash disk"

Link to post
Share on other sites
  • 4 months later...

 

 

I i put the FX 3.1 Mod on mine and do not like it and im trying to go back to normal.

Even the Gizmo's rom has a modded skin (thanks GIZMO). I also i'm looking for the genuine one from Pioneer.

Anyway, if you find one, even USA version, please share it with me, i think it could be possible to take only the skin and put it in the regular version firmware. :ph34r:

Link to post
Share on other sites

Even the Gizmo's rom has a modded skin (thanks GIZMO). I also i'm looking for the genuine one from Pioneer.

Anyway, if you find one, even USA version, please share it with me, i think it could be possible to take only the skin and put it in the regular version firmware. :ph34r:

i did find all the original software for my F900BT and reverted it back to 2.08 i belive but the file i downloaded also has a lot of help files that might be what you are looking for. i included the link if it doesnt work just google avic problem solver files.

 

http://avic411.com/index.php?/topic/22599-solved-the-formatmbr-sdmlc-and-mapdbinfo-error-0x0000-also-the-major-fix/

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...