Jump to content
AVIC411.com

Recommended Posts

how can i review the speedcams of switzerland and france on the map of my avic-f70dab ?

In all other european countries the speedcams are visible.

Can u tel me how did u manage the speed cams on your unit??? Did u buy them or add from here?? Thanks

 

Btw I have also 70DAB PLEASE some help, thanks........

Link to post
Share on other sites
  • Replies 718
  • Created
  • Last Reply

Top Posters In This Topic

Look at my post from 20. February.

The best database of speedcams you can find at Poibase.com but you have to pay.

 

im sorry dude, maybe im still doing something wrong... i have follow page 10 and i have copy speedcamupdate.spd to a usb, just copied. when i connect the usb in the unit and start syncTool, my usb get re-build and nothing happend, the speedcam folder is gone. what do you think? 

 

thanks

Link to post
Share on other sites

im sorry dude, maybe im still doing something wrong... i have follow page 10 and i have copy speedcamupdate.spd to a usb, just copied. when i connect the usb in the unit and start syncTool, my usb get re-build and nothing happend, the speedcam folder is gone. what do you think? 

 

thanks

You should not start synctool after connection with your usb-stick.

After starting your unit you must connect your usb-stick which you did prepare as it was described on page 10 from ASD255 to USB1 from your unit,

After a short time your unit will reboot into the testmode.

At the menu point File Maintenance  you can enter the Filesystem and navigate to the folder speedcam from linuxroot to copy the SpeedcamUpdates.spd into this folder.

The filename must be exactly written as i did it.

After this you have to disconnect your stick and reboot your unit.

Caution, do not erase anything  to prevent a brick of your unit.

If you are not strong in managing filesystems let do this better by an IT-specialist.

Link to post
Share on other sites

You should not start synctool after connection with your usb-stick.

After starting your unit you must connect your usb-stick which you did prepare as it was described on page 10 from ASD255 to USB1 from your unit,

After a short time your unit will reboot into the testmode.

At the menu point File Maintenance  you can enter the Filesystem and navigate to the folder speedcam from linuxroot to copy the SpeedcamUpdates.spd into this folder.

The filename must be exactly written as i did it.

After this you have to disconnect your stick and reboot your unit.

Caution, do not erase anything  to prevent a brick of your unit.

If you are not strong in managing filesystems let do this better by an IT-specialist.

 

thanks, im a IT specialist, maybe i missed to copy the file spd into the usb before the testmode.

 

so for me and for everyone.

 

1 copy the files to USB (done)

2 test mode (done)

3 remove the usb copy the spd file in it from the laptop (not done yet)

4 connect the usb again in the unit (not done yet)

5 navigate to spd on the usb and copy it in to the unit (not done yet)

 

right? 

 

maybe an idea to make screenshots walkthrought ???

 

thanks again

Link to post
Share on other sites

You should not start synctool after connection with your usb-stick.

After starting your unit you must connect your usb-stick which you did prepare as it was described on page 10 from ASD255 to USB1 from your unit,

After a short time your unit will reboot into the testmode.

At the menu point File Maintenance  you can enter the Filesystem and navigate to the folder speedcam from linuxroot to copy the SpeedcamUpdates.spd into this folder.

The filename must be exactly written as i did it.

After this you have to disconnect your stick and reboot your unit.

Caution, do not erase anything  to prevent a brick of your unit.

If you are not strong in managing filesystems let do this better by an IT-specialist.

 

Hi Bernd,

 

i found in speedcam folder(unit) a spud file, should i leave it or remove it?

 

thanks

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...