bizkid Posted August 28, 2015 Report Share Posted August 28, 2015 Can you tell us exactly what you did? I did excatly as monsterF9 prescribed. Quote Link to post Share on other sites
mihnik Posted August 28, 2015 Report Share Posted August 28, 2015 @gemma99 for sure. but, have a look here: Posted 26 August 2015 - 07:08 PM by Monster99 Confirmed update from 5.0 to 6.0 on F9220 Apply these changes to your RenewallFlib.dll on your Unit: Offset 000019F0: 0350A0E3 replace with 0050A0E3 Offset 00001A10: 0350A0E3 replace with 0050A0E3 Offset 00001AD8: 0350A0E3 replace with 0050A0E3 Offset 00001C1C: 0250A0E3 replace with 0050A0E3 Offset 00001C24: 0150A0E3 replace with 0050A0E3 Offset 00001A3C: 0350A0E3 replace with 0050A0E3 Users with units older than F30BT will have to use cardinfo from this post: http://avic411.com/i...f8430/?p=271168 for the device of your interest there are HERE fresh 2015 maps for igo domain. Based on your post count, you should have gained enough expertise to manage. BR Quote Link to post Share on other sites
supersonpua Posted August 28, 2015 Report Share Posted August 28, 2015 hello guys i have 930bt and it doesn't accept "PASSWORDPASSWORD". i edited .dll as monster99 suggested but nothing seams to work. someone with same unit managed to update it? thank you Quote Link to post Share on other sites
Alexvd Posted August 28, 2015 Report Share Posted August 28, 2015 As we speak, updating with an F40BT. Maybe tomorrow I would make a dummy manual. Regards, Alex Quote Link to post Share on other sites
helder89 Posted August 28, 2015 Report Share Posted August 28, 2015 Download Link doesn't work anymore? Quote Link to post Share on other sites
osiris Posted August 29, 2015 Report Share Posted August 29, 2015 confirmed update on German F930BT as described by Monster99 tried on F900BT (Integrate version 4.001000 Maps Q1/2014) doesnt work (tried with normal update .- only inserting SD card and waitung for question to update AND with different cardinfo.cif) tried on F910BT (original version 3.010100, Maps version 02.000400) doesnt work with normal update mode, AND don´t work with different cardinfo.cif updated F910 to Integrate version 4.001000 Maps Q1/2014 now trying to copy my installation (F930BT) to F900BT..... Quote Link to post Share on other sites
kandieh Posted August 29, 2015 Report Share Posted August 29, 2015 i would also really like to update the maps. are there a solve for the problems? i even cant see a link so far Quote Link to post Share on other sites
kenanv Posted August 29, 2015 Report Share Posted August 29, 2015 PM zip password to me too plx... Quote Link to post Share on other sites
osiris Posted August 29, 2015 Report Share Posted August 29, 2015 just want to backup my unit, but Supertestmode let me not copy my flash disk to usb ?! [update] copied successfully. I have to use a smaller SD card, 64GB with Exfat did not work [/update]Is there a solution with normal Testmode which include Totalcommander? When i try i get an script error.... O, just realized, that F900 F910 ist WINCE OS, F930 seems to be a different OS... Quote Link to post Share on other sites
abuisine Posted August 29, 2015 Report Share Posted August 29, 2015 Hi gang, can someone MP me the password ?? Thx !!! Quote Link to post Share on other sites
helder89 Posted August 29, 2015 Report Share Posted August 29, 2015 Confirmed update from 5.0 to 6.0 on F9220 Apply these changes to your RenewallFlib.dll on your Unit: Offset 000019F0: 0350A0E3 replace with 0050A0E3 Offset 00001A10: 0350A0E3 replace with 0050A0E3 Offset 00001AD8: 0350A0E3 replace with 0050A0E3 Offset 00001C1C: 0250A0E3 replace with 0050A0E3 Offset 00001C24: 0150A0E3 replace with 0050A0E3 Offset 00001A3C: 0350A0E3 replace with 0050A0E3 Users with units older than F30BT will have to use cardinfo from this post: http://avic411.com/index.php?/topic/37407-2013-eu-update-f30-f930-f9310-f40-f940-f840-f8430/?p=271168 is it only on F9220 ?? because my F940BT RenewallFlib.dll doesn`t have Offset 00001AD8 Offset 00001C1C Offset 00001C24 Offset 00001A3C only 2 i can find are Offset 000019F0 0350A0E3 and Offset 00001A10 0350A0E3 Quote Link to post Share on other sites
Nudie Posted August 29, 2015 Report Share Posted August 29, 2015 Confirmed update from 5.0 to 6.0 on F9220 Apply these changes to your RenewallFlib.dll on your Unit: Offset 000019F0: 0350A0E3 replace with 0050A0E3 Offset 00001A10: 0350A0E3 replace with 0050A0E3 Offset 00001AD8: 0350A0E3 replace with 0050A0E3 Offset 00001C1C: 0250A0E3 replace with 0050A0E3 Offset 00001C24: 0150A0E3 replace with 0050A0E3 Offset 00001A3C: 0350A0E3 replace with 0050A0E3 Users with units older than F30BT will have to use cardinfo from this post: http://avic411.com/index.php?/topic/37407-2013-eu-update-f30-f930-f9310-f40-f940-f840-f8430/?p=271168 is it only on F9220 ?? because my F940BT RenewallFlib.dll doesn`t have Offset 00001AD8 Offset 00001C1C Offset 00001C24 Offset 00001A3C only 2 i can find are Offset 000019F0 0350A0E3 and Offset 00001A10 0350A0E3 in the top bar of your hex editor it says 0 to F the last number/letter is the one you start at the colomn. for example Offset 00001C24 code starts at colomn 4 Quote Link to post Share on other sites
helder89 Posted August 29, 2015 Report Share Posted August 29, 2015 in the top bar of your hex editor it says 0 to F the last number/letter is the one you start at the colomn. for example Offset 00001C24 code starts at colomn 4 found them +thx mate Quote Link to post Share on other sites
helder89 Posted August 29, 2015 Report Share Posted August 29, 2015 Confirmed update from 5.0 to 6.0 on F9220 Apply these changes to your RenewallFlib.dll on your Unit: Offset 000019F0: 0350A0E3 replace with 0050A0E3 Offset 00001A10: 0350A0E3 replace with 0050A0E3 Offset 00001AD8: 0350A0E3 replace with 0050A0E3 Offset 00001C1C: 0250A0E3 replace with 0050A0E3 Offset 00001C24: 0150A0E3 replace with 0050A0E3 Offset 00001A3C: 0350A0E3 replace with 0050A0E3 Users with units older than F30BT will have to use cardinfo from this post: http://avic411.com/index.php?/topic/37407-2013-eu-update-f30-f930-f9310-f40-f940-f840-f8430/?p=271168 Didn't work on F940BT ( pass incorrect ) Quote Link to post Share on other sites
kenanv Posted August 29, 2015 Report Share Posted August 29, 2015 anyone got the password for the zip file? I cant wait to get started.... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.