Corvus Posted September 1, 2015 Report Share Posted September 1, 2015 So you update the device first with 2015 map before you did this al?No, had the 2013 maps, and did delet the existing apl dir on the device by mistake , dident have backup.I then copied the apl dir from the new downloaded 2015 map and used it as backup, luckily it worked. Quote Link to post Share on other sites
jammie Posted September 1, 2015 Report Share Posted September 1, 2015 Hi, Â New to all of this, can I have the password for the ZIP file please, thanks in advance. Quote Link to post Share on other sites
youngsyp Posted September 1, 2015 Report Share Posted September 1, 2015 Hi all, Â I can confirm this works on the F9210BT. Â As per above, the process I followed was: Â 1. Run 'supertestmode' from a freshly formatted (FAT32) SD card. 2. Copy RenewallFlib.dll from USER\PRG0\APL to SD root. 3. Remove SD card from AVIC and edit RenewallFlib.dll as per monsterF9's guidance on a PC. 4. Insert SD card with edited RenewallFlib.dll back into AVIC. 5. Delete RenewallFLib.dll from USER\PRG0\APL on AVIC. 6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL. 7. Remove SD card format it and copy Update, FIRMWARE and (modded) CARDINFO.cif onto it. 8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD 9. Sit back and wait for 25 minutes whilst the unit updates. Â If anyone needs a hand with this, please ping me. I'm by no means an expert but after some reading, understand what's needed and how to achieve it. Â Thanks to Flomsem for the SD contents and monsterF9 for putting in the work to crack the content. If you both PM me with your PayPal details, I'll send a donation to show my appreciation for your efforts. Â Cheers, Â Paul Quote Link to post Share on other sites
tiemen26 Posted September 1, 2015 Report Share Posted September 1, 2015 gd does somebody have the password for zip file thanks in advance brgrds Quote Link to post Share on other sites
helder89 Posted September 2, 2015 Report Share Posted September 2, 2015 Well, didn't work on F940BT.... Now let's see if it works with mooded Cardinfo.... Â EDIT: still not accepting the Pass Quote Link to post Share on other sites
F920bt Posted September 2, 2015 Report Share Posted September 2, 2015 Hi there, Â Can anyone give me the password please??? Â Thanks in advance Quote Link to post Share on other sites
Hangloose_dude Posted September 2, 2015 Report Share Posted September 2, 2015 Hello @Flomsen Would you be so kind as to pm me the password? Â Also. This unit was in a used car I bought. There is no SD card in the unit at the moment. Do i need a Pioneer SD card to update this unit? Quote Link to post Share on other sites
helder89 Posted September 2, 2015 Report Share Posted September 2, 2015 Hello @Flomsen Would you be so kind as to pm me the password? Â Also. This unit was in a used car I bought. There is no SD card in the unit at the moment. Do i need a Pioneer SD card to update this unit? No, u need a normal empty Micro SD Card... Quote Link to post Share on other sites
Hangloose_dude Posted September 2, 2015 Report Share Posted September 2, 2015 Oke, Â Thanks. Now all i Need is the password. Anyone care to help me? Quote Link to post Share on other sites
F920bt Posted September 2, 2015 Report Share Posted September 2, 2015 No, u need a normal empty Micro SD Card... Hi Helder89,  Do u've the password ?  If is yes, please pm  thanks in advance  Quote Link to post Share on other sites
bilouxp Posted September 2, 2015 Report Share Posted September 2, 2015 Hi all, Â I can confirm this works on the F930BT. Â As per above, the process I followed was: Â 1. Run 'supertestmode' from a freshly formatted (FAT32) SD card. 2. Copy RenewallFlib.dll from USER\PRG0\APL to SD root. 3. Remove SD card from AVIC and edit RenewallFlib.dll as per monsterF9's guidance on a PC. 4. Insert SD card with edited RenewallFlib.dll back into AVIC. 5. Delete RenewallFLib.dll from USER\PRG0\APL on AVIC. 6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL. 7. Remove SD card format it and copy Update, FIRMWARE and (modded) CARDINFO.cif onto it. 8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD 9. Sit back and wait for 25 minutes whilst the unit updates. Â If anyone needs a hand with this, please ping me. I'm by no means an expert but after some reading, understand what's needed and how to achieve it. Â Thanks to Flomsem for the SD contents and monsterF9 for putting in the work to crack the content Quote Link to post Share on other sites
xavstar Posted September 2, 2015 Report Share Posted September 2, 2015 Anybody can send me in PMÂ password for zip archive please. Â I've asked to flomsen but no response yet and need to test the update on F9310BT Â Â Thx Quote Link to post Share on other sites
Pioneer snow Posted September 2, 2015 Report Share Posted September 2, 2015 Skip warning and nag for 2015 update? Â Can I use same hex edithing like with the 2013 5.0 update? Quote Link to post Share on other sites
RafRoo Posted September 2, 2015 Report Share Posted September 2, 2015 Today I will try to do this upgrade on my AVI F930BT. I will let know how it goes.... Quote Link to post Share on other sites
jammie Posted September 2, 2015 Report Share Posted September 2, 2015 Hi, Â New to all of this, can I have the password for the ZIP file please, thanks in advance. Â Hi, Anyone got the password they can PM me with? Thanks in advance Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.