almosthero Posted September 2, 2015 Report Share Posted September 2, 2015 To all of you guys:To get a password send a Private Message to:Flomsenor Ivoo or CELLand stop spamming this topic. Quote Link to post Share on other sites
jmgs.rst Posted September 2, 2015 Report Share Posted September 2, 2015 Hi, Where I can find the cracked "RenewalIFLib.dll" ??? I modified the original and do not have a backup. It is for a F930BT Thanks!!! Quote Link to post Share on other sites
F920bt Posted September 2, 2015 Report Share Posted September 2, 2015 I have a BIG Problem I have been trying to upgrade my AVIC F30BT following your steps. When I go to password doesn't work with PASSWORDPASSWORD (with crack .dll) I tried to change the file VERINFO.DAT "http://avic411.com/index.php?/topic/37407-2013-eu-update-f30-f930-f9310-f40-f940-f840-f8430/?p=271168" of the 2013 version to this version and when I run my PIONEER I have a black screen with the info "Please, insert the correct SD". If I remove the SD on the device this mensage still in the screen and the radio doesn't work. Anyone knows how to resolve that??? Thanks in advance Quote Link to post Share on other sites
F920bt Posted September 2, 2015 Report Share Posted September 2, 2015 I've tried it, but always write: "No SD available. Insert SD to continue" and won't start What can I do? thx I've the same error. What did you resolve that ? Thanks in advance Quote Link to post Share on other sites
CELL Posted September 2, 2015 Report Share Posted September 2, 2015 Try full format sd card or try a different sd card and afcorse full format. Quote Link to post Share on other sites
almosthero Posted September 2, 2015 Report Share Posted September 2, 2015 I tried editing RenewalIFlib file but I have completely different numbers(I know how to use hex editor) than monsterF9 even though I have the same unit(f9220bt).Does anyone know why and what should I do?EDIT:Ok, solution was much easier than I thought. I was looking for wrong file. I had to change this one from prg1,not from prg0. So another confirmation that monsterF9 method works on f9220bt. THANK YOU!EDIT2:and btw polish voice commands works without any additional files/installation. Quote Link to post Share on other sites
F920bt Posted September 2, 2015 Report Share Posted September 2, 2015 Try full format sd card or try a different sd card and afcorse full format. I don't understand mate What do u mean ? Is possible to make hard reset in mi AVIC con the testmode ???? Quote Link to post Share on other sites
leorphee Posted September 2, 2015 Report Share Posted September 2, 2015 I have a BIG Problem I have been trying to upgrade my AVIC F30BT following your steps. When I go to password doesn't work with PASSWORDPASSWORD (with crack .dll) I tried to change the file VERINFO.DAT "http://avic411.com/index.php?/topic/37407-2013-eu-update-f30-f930-f9310-f40-f940-f840-f8430/?p=271168" of the 2013 version to this version and when I run my PIONEER I have a black screen with the info "Please, insert the correct SD". If I remove the SD on the device this mensage still in the screen and the radio doesn't work. Anyone knows how to resolve that??? Thanks in advance I've tried it, but always write: "No SD available. Insert SD to continue" and won't start What can I do? thx I have the same Problem I try it with this Manual but do some wrong Confirmed update from 5.0 to 6.0 on F9220 Apply these changes to your RenewallFlib.dll on your Unit: Offset 000019F0: 0350A0E3 replace with 0050A0E3 Offset 00001A10: 0350A0E3 replace with 0050A0E3 Offset 00001AD8: 0350A0E3 replace with 0050A0E3 Offset 00001C1C: 0250A0E3 replace with 0050A0E3 Offset 00001C24: 0150A0E3 replace with 0050A0E3 Offset 00001A3C: 0350A0E3 replace with 0050A0E3 Users with units older than F30BT will have to use cardinfo from this post: http://avic411.com/index.php?/topic/37407-2013-eu-update-f30-f930-f9310-f40-f940-f840-f8430/?p=271168 Hi all, I can confirm this works on the F9210BT. As per above, the process I followed was: 1. Run 'supertestmode' from a freshly formatted (FAT32) SD card. 2. Copy RenewallFlib.dll from USER\PRG0\APL to SD root. 3. Remove SD card from AVIC and edit RenewallFlib.dll as per monsterF9's guidance on a PC. 4. Insert SD card with edited RenewallFlib.dll back into AVIC. 5. Delete RenewallFLib.dll from USER\PRG0\APL on AVIC. 6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL. 7. Remove SD card format it and copy Update, FIRMWARE and (modded) CARDINFO.cif onto it. 8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD 9. Sit back and wait for 25 minutes whilst the unit updates. If anyone needs a hand with this, please ping me. I'm by no means an expert but after some reading, understand what's needed and how to achieve it. Thanks to Flomsem for the SD contents and monsterF9 for putting in the work to crack the content. If you both PM me with your PayPal details, I'll send a donation to show my appreciation for your efforts. Cheers, Paul Big Thanks for it!! Please need some Help and sorry for my english Quote Link to post Share on other sites
CELL Posted September 2, 2015 Report Share Posted September 2, 2015 you are trying to update? Bud he keeps asking put right sd in? Then your update sd is not good. try a "full format" of the SD card, not a quick one. Put update back op SD en try again. You can olso try a other SD card and do the same as above. I got that problem with installing 2013 maps. Did it with other sd en full format and i could install. Quote Link to post Share on other sites
youngsyp Posted September 2, 2015 Report Share Posted September 2, 2015 Hi, Where I can find the cracked "RenewalIFLib.dll" ??? I modified the original and do not have a backup. It is for a F930BT Thanks!!! The RenewallFLib.dll is specific to your unit. There's no guarantee the same file from the same model unit will work in your unit. You could try the one included in the 2015 files and see if that works. You may have found out the hard way why you always back up a file before you edit it. Not very helpful I know but that's the reality of it unfortunately. Paul Quote Link to post Share on other sites
youngsyp Posted September 2, 2015 Report Share Posted September 2, 2015 you are trying to update? Bud he keeps asking put right sd in? Then your update sd is not good. try a "full format" of the SD card, not a quick one. Put update back op SD en try again. You can olso try a other SD card and do the same as above. I got that problem with installing 2013 maps. Did it with other sd en full format and i could install. ^This^. Re-format the card and follow the instructions implicitly. If you skip steps it won't work. It's a process that works if followed. If it still doesn't work and your unit is included in this thread as being successful, you need a different SD card. Paul Quote Link to post Share on other sites
paulcivictyper Posted September 2, 2015 Report Share Posted September 2, 2015 HI ANY FILE DOWNLOAD LINKS THAT WORK ?# Quote Link to post Share on other sites
Sjarrel Posted September 2, 2015 Report Share Posted September 2, 2015 Hi did you still have the 2013 update?? run it again and the system will work again. I did the same and ive got the same message, just reload the 2013 version and i guess it will help you fixing your system Quote Link to post Share on other sites
leorphee Posted September 2, 2015 Report Share Posted September 2, 2015 I have try the 2013 update but it dosnt work I found this in the AVIC test mode Quote Link to post Share on other sites
Sjarrel Posted September 2, 2015 Report Share Posted September 2, 2015 I have try the 2013 update but it dosnt work I found this in the AVIC test mode Maybe it's possible to install the firmware again from Pioneer? I hope that it recovers your system http://www.pioneer.eu/eur/support/software/AVIC-F9210BT/page.html#download_211 http://www.pioneer.eu/files/support/AVIC-F20BT_F920BT/AVICF20BT_APL2.00300.zip Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.