voviks Posted September 2, 2015 Report Share Posted September 2, 2015 Got it working on F930BT! Was updated from 5.0 (2013, also done from this forum). Followed the instructions posted before. Works just fine! Thanks a lot! Two things to be said: 1. Using hex-editor you should use search function to find the exact text specified in post #65 and replace all entries accordingly. 2. CARDINFO file from the zip-file worked, no modded file used. Quote Link to post Share on other sites
marcovan Posted September 3, 2015 Report Share Posted September 3, 2015 may i have the password for the zip thanks Quote Link to post Share on other sites
leorphee Posted September 3, 2015 Report Share Posted September 3, 2015 Maybe it's possible to install the firmware again from Pioneer? I hope that it recovers your system http://www.pioneer.eu/eur/support/software/AVIC-F9210BT/page.html#download_211 http://www.pioneer.eu/files/support/AVIC-F20BT_F920BT/AVICF20BT_APL2.00300.zip I ve try it yesterday but it always the same I will try it with fresh SD Card with the 2013 & the 2015 Update I have the 2012 Update to maybe... Thank you for the support Quote Link to post Share on other sites
F920bt Posted September 3, 2015 Report Share Posted September 3, 2015 I tried editing RenewalIFlib file but I have conpletely different numbers(I know how to use hex editor) than monsterF9 even though I have the same unit(f9220bt). Does anyone know why and what should I do? EDIT: Ok, solution was much easier than I thought. I was looking for wrong file. I had to change this one from prg1,not from prg0. So another confirmation that monsterF9 method works on f9220bt. What Pionner do u've? I've a F30bt and doesn't work like monsterF9 says. I don't know if try to move the RenewalIFlib.dll file from prg0 to prg1. Do u think that it works ? it works to u ? Thanks in advance mate Quote Link to post Share on other sites
Navigator2016 Posted September 3, 2015 Report Share Posted September 3, 2015 Hi, on my f930bt the supertestmode paste function is no active. It copies file but it's impossible paste on SD. Is there anyone that can help me? Thanks Quote Link to post Share on other sites
almosthero Posted September 3, 2015 Report Share Posted September 3, 2015 What Pionner do u've? I've a F30bt and doesn't work like monsterF9 says. I don't know if try to move the RenewalIFlib.dll file from prg0 to prg1. Do u think that it works ? it works to u ? Thanks in advance mate Like I've wrote, I have f9220bt. I only edited file from prg1 without copying it to prg0(or doing anything with prg0). I've noticed that these file are completely different, so I wouldn't recommend to copy from prg0 to prg1 and the other way(although I'm not really an expert). What doesn't work more precisely? Quote Link to post Share on other sites
CELL Posted September 3, 2015 Report Share Posted September 3, 2015 Maybe it's possible to install the firmware again from Pioneer? I hope that it recovers your system http://www.pioneer.eu/eur/support/software/AVIC-F9210BT/page.html#download_211 http://www.pioneer.eu/files/support/AVIC-F20BT_F920BT/AVICF20BT_APL2.00300.zip Isn't HD radio not something else? zome cind of extern unit. i got the same bud everything work fine. Quote Link to post Share on other sites
youngsyp Posted September 3, 2015 Report Share Posted September 3, 2015 Hi, on my f930bt the supertestmode paste function is no active. It copies file but it's impossible paste on SD. Is there anyone that can help me? Thanks There's a video on Youtube walking through this function. Essentially the GUI for supertestmode is very unintuitive. What you need to do is Select the file (so it has the + next to it), then Copy the selected file, then move the action back to Enter and navigate back up each level of the root until you get to where you want to paste the file. Paste should be enabled now. Paul Quote Link to post Share on other sites
kronen033 Posted September 3, 2015 Report Share Posted September 3, 2015 Can somebody send me the password? Thx. Quote Link to post Share on other sites
Navigator2016 Posted September 3, 2015 Report Share Posted September 3, 2015 There's a video on Youtube walking through this function. Essentially the GUI for supertestmode is very unintuitive. What you need to do is Select the file (so it has the + next to it), then Copy the selected file, then move the action back to Enter and navigate back up each level of the root until you get to where you want to paste the file. Paste should be enabled now. Paul I've done! Thank you! Quote Link to post Share on other sites
michaelrally Posted September 3, 2015 Report Share Posted September 3, 2015 i have done the update on a f930bt unit thxn @flomsen @cell and @monsterf9 everything works great Quote Link to post Share on other sites
paulcivictyper Posted September 3, 2015 Report Share Posted September 3, 2015 Can anyone send me a link to the file download that works please ? Quote Link to post Share on other sites
michaelrally Posted September 3, 2015 Report Share Posted September 3, 2015 @paulcivictyper the link to donwload is on page 10 read this threat complete from page 1 tot 12 then you now to update your pioneer Quote Link to post Share on other sites
Ivoo Posted September 3, 2015 Report Share Posted September 3, 2015 now my question? has someone the map already working on the F940BT. Quote Link to post Share on other sites
F920bt Posted September 3, 2015 Report Share Posted September 3, 2015 Like I've wrote, I have f9220bt. I only edited file from prg1 without copying it to prg0(or doing anything with prg0). I've noticed that these file are completely different, so I wouldn't recommend to copy from prg0 to prg1 and the other way(although I'm not really an expert). What doesn't work more precisely? I follow all steps (pages back) and when I insert the Password (PASSWORDPASSWORD), it doesn't work. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.