Jump to content
AVIC411.com

2015 European Map Update for Pioneer AVIC-F30BT, F930BT, F9310BT, F40BT, F940BT, F840BT, F8430BT


Recommended Posts

Hallo,

ich finde es ganz toll, das hier der europ. Map Update für mein Pioneer AVIC F940BT für eine freiwillige Spende zu Verfügung gestellt wird.

Leider kann und könnte ich davon keinen Gebrauch machen, da ich nicht mit der Testmode 2.3 in das Betriebssystem von meinem F940BT komme.

Ich lebe seit ca einem Jahr in Chile un möchte mir nur die NAVTEQ Karte von Südamerika 2013 machen, aber seit mehreren Monaten versuche ich vergeblich mit verschiedenen Downloads der Testmode 2.3

und auch verschiedenen Micro Sd-Karten ind das Betriebssystem von meinem Navi F940BT zu kommen. Ich habe schon alle möglichen Foren zu diesem Thema durch gearbeitet, aber auch leider dort keine

Lösung gefunden.

Ich hoffe, dass mir hier im Forum einer weiter helfen kann.

 

 

Viele Grüße aus dem fernen Chile

 

 

Uli 

 

Uli you should use Supertestmode from here on an AVIC F940-BT

 

Uli sollten Supertestmode von hier auf einer AVIC-F940 BT nutzen

 

its in post 4 from Pionara

 

ihrer in der Post 4 von Pionara

 

http://avic411.com/index.php?/topic/35674-testmode-and-firmware-401/?p=259316

 

use google translate to help with your English ;o)

Link to post
Share on other sites
  • Replies 788
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

This is a post for dutch and belgium users that are using speedcams.

http://s000.tinyupload.com/?file_id=09205970760400181779

 

This is only Holland and Belgium ,

 

Just put the PC dir on a sd card and insert this in the navigation, just install zwarte punten and the should be in your navigation.

Dus gewoon de map PC kopiëren op een sd en dan de zwarte punten installeren, ik heb het alleen zelf met 6.0 nog niet geprobeerd en hoop dat iemand mij kan vertellen of het werkt :)

It's working on F920BT. Thanks!

Link to post
Share on other sites

facile !! même si j'ai pas toujours dit ça , merci a celui qui se reconnaitra !  96.gif

 

tu télécharge le lien qui est donné en 1ere page , tu extrait sur une SD ,tu mets la SD dans ton

avic et tu démarre ton pioneer ,une question est posée tu réponds oui ,c'est tout !

un bon conseil sauvegarde bien ta configuration avant !

 

bon j'arrête la parce que c'est pas un forum francais, on va se faire tiré les oreilles !!

Link to post
Share on other sites

facile !! même si j'ai pas toujours dit ça , merci a celui qui se reconnaitra !  96.gif

 

tu télécharge le lien qui est donné en 1ere page , tu extrait sur une SD ,tu mets la SD dans ton

avic et tu démarre ton pioneer ,une question est posée tu réponds oui ,c'est tout !

un bon conseil sauvegarde bien ta configuration avant !

 

bon j'arrête la parce que c'est pas un forum francais, on va se faire tiré les oreilles !!

 

Merci beaucoup je teste ça tout a l'heure ;)

Link to post
Share on other sites

Hallo,

 

eine Frage an:Flomsen, Pionara, Monsterf9 und Sjarrel! :

 

kann ich mit der Supertestmode auf mein AVIC F940BT die neue NAVTEQ City Nav S America NT 2013 installieren.

 

Ich habe dieses Forum und auch andere studiert, aber bisher keine Lösung gefunden. (mit der Testmode 2.3 komme ich nicht in mein Betriebssystem)

 

Vielen Dank und Gruß aus Chile

 

Uli

 

Hello, a question of: Flomsen, Pionara, Monsterf9 and Sjarrel! : Can I install the Super Test Mode on my AVIC F940BT the new NAVTEQ City Nav S America NT-2013. I have studied this forum and others, but so far not found a solution. (with the test mode 2.3 I can not get into my operating system) Thanks and greetings from Chile Uli

Link to post
Share on other sites

Hallo,

 

eine Frage an:Flomsen, Pionara, Monsterf9 und Sjarrel! :

 

kann ich mit der Supertestmode auf mein AVIC F940BT die neue NAVTEQ City Nav S America NT 2013 installieren.

 

Ich habe dieses Forum und auch andere studiert, aber bisher keine Lösung gefunden. (mit der Testmode 2.3 komme ich nicht in mein Betriebssystem)

 

Vielen Dank und Gruß aus Chile

 

Uli

 

Hello, a question of: Flomsen, Pionara, Monsterf9 and Sjarrel! : Can I install the Super Test Mode on my AVIC F940BT the new NAVTEQ City Nav S America NT-2013. I have studied this forum and others, but so far not found a solution. (with the test mode 2.3 I can not get into my operating system) Thanks and greetings from Chile Uli

The testmod 1.4 works very well with f940bt

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...