guizmo Posted May 8, 2016 Report Share Posted May 8, 2016 http://avic411.com/index.php?/topic/82096-2015-european-map-update-for-pioneer-my1112-high-avic-f30bt-f930bt-f9310bt-f40bt-f940bt-f840bt-f8430 Quote Link to post Share on other sites
jimmybondi Posted May 16, 2016 Report Share Posted May 16, 2016 Upgrading my F940BT was very straightforward. No PW, no Hexediting  just copy the folders UPDATE, FIRMWARE and the file CARDINFO.cif to an empty SD card and udating will take about 25 min.  How do I use this file 'Germany_HERE_2014.Q3_141210.poi' ? Quote Link to post Share on other sites
bennywittek Posted May 16, 2016 Report Share Posted May 16, 2016 where can i get the download link ? Thanks Quote Link to post Share on other sites
Travolta Posted May 26, 2016 Report Share Posted May 26, 2016 Hi all,  I'm back!!! Sorry I was over 15 Months on the way and had not time. I have already tried all the descriptions to update my F20BT but it always fails, as usual a new SD Card fully formated copied the whole files Firmwar, Update (With Verinfo.DAT) the modified CARDINF.CIF not success. I have also modified the .ddl file with no success.   I have downloaded the files were offered in the first mail with the patched .DAT and modified .CIF  After update I got "An error has occured and the update has failed" I can then repeat the update and it won't go out of this loop. I have also tried to go back to 2013 and at the end after 99% I get the same error. Any suggestion?  Thanks in Advanced for any help Quote Link to post Share on other sites
Travolta Posted May 26, 2016 Report Share Posted May 26, 2016 After a lot of testing and trying I have the 2013 working again. I will test the 2015 again and let you know.  For other who has the issue with " Wrong SD Card or insert SD Card"..... Please boot into test mode and go to the option to write the firmware (Before you have to copy the folder from the 2015 firmware, update/user/ copy the PRG folder and rename it to ((AVICZ110)) put it to the root of sd and copy the testkey to the root, then choose from SD and rewrite all positions then reset the user settings.  Reboot and it will say no available application program. Boot again to test mode and write the firmware without resetting the settings, do a .dll replacement from Pionara and insert the 2013 update SD Card, then reboot, it will update back to 2013.  This is the solution to all ppl who has the error with no application program.  Regards Quote Link to post Share on other sites
Travolta Posted May 26, 2016 Report Share Posted May 26, 2016 I can confirm the firmware is working on my F20BT after all modifications. I have now version 6.0 Quote Link to post Share on other sites
Pepik Posted June 15, 2016 Report Share Posted June 15, 2016 Hi guys, so have pioneer avic 9220bt and with that update have problems too. Last tried update was with error (broken file) tested 2x and 2 another sd cards. Â Can some up that update please? Quote Link to post Share on other sites
digger500 Posted June 25, 2016 Report Share Posted June 25, 2016 Hello Jimmibondy You have take the Files from guizmo/spijun ,put it on the sd card and it goes without anything to do on the files?? My F940bt is, with no updates, from 2012. Â CU Digger500 Quote Link to post Share on other sites
Igor82 Posted June 29, 2016 Report Share Posted June 29, 2016 I updated a F9310BT from 3.0 to this 6.0. Â Hey, I am new here. I have also 9310 with 3.0 version (old). Can You confirm how You did upgrade? Was it according to manual given here? Which files you modified? (Cardinfo.cif and verinfo.dat). Just to ease my operation. THX Quote Link to post Share on other sites
Igor82 Posted June 29, 2016 Report Share Posted June 29, 2016 Hey Guys, Any idea if this update will work on AVIC-F3210, according to original update info it should be folder: T1000-23350, but I think here we have T1000-23347, so there is some difference. I suppose that update (map) is the same, but I am not sure of this. Did anybody try to do update on F3210??? If Yes please respond. THX Quote Link to post Share on other sites
pojjo73 Posted July 1, 2016 Report Share Posted July 1, 2016 I have the F930BT with the old 2011 firmware , and tried the 2015 update , but it failed , incorrect sd card notification , after a lot of research succeeded installing the 2013 version. Does anyone know if you have to upgrade first to 2013 in order to make the 2015 update?. I would like to have the 2015 update but am a little afraid i might brick the system again.  It's a bit confusing here because most of the topics are old and or the links are dead , and most of the members English grammar isn't that great... Quote Link to post Share on other sites
youngsyp Posted July 1, 2016 Report Share Posted July 1, 2016 Has anyone had any luck with removing the 'nag' in this software version? Â Cheers, Â Paul Quote Link to post Share on other sites
rebslx Posted July 7, 2016 Report Share Posted July 7, 2016 Hi,  Someone help me to find this file? the 2015 European Map Update for Pioneer Thanks Quote Link to post Share on other sites
rebslx Posted July 7, 2016 Report Share Posted July 7, 2016 I got the F20BT, butI read that it could be used with the right files. Right?  But I got none either the main file or the ones for F20BT....  Thanks   Quote Link to post Share on other sites
badworseme Posted July 13, 2016 Report Share Posted July 13, 2016 I updated my F920BT about 4 months ago and the update went down fine. New maps show the new Street in my neighborhood, so that's fine. But there's one right now major concern: I can't get it in night mode anymore. In the menu there's only the choice between day and automatic but when I put it in Auto it will still remain in day mode. And at night the screen is really bright. Somewhere in the middle of this thread someone had the same problem and he seems to have solved it somehow. But he didn't say how. I already wrote a PN but I'm not sure if I will get an answer. Â Did anyone have the same problem and/or knows a solution? Â Regards Alex Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.