Jump to content
AVIC411.com

2015 European Map Update for Pioneer AVIC-F30BT, F930BT, F9310BT, F40BT, F940BT, F840BT, F8430BT


Recommended Posts

Hello, i'm very confused. Everything is prepared for the update. The sd Card is correctly formated( i still used this card for the 2013 update too). The root of the card looks like

 

FIRMWARE

Update

 

If i put the card in the Slot and Start the engine, the Radio normaly starts, no update question is coming? Parking break activated

 

Anybody can help? It's the f930bt

 

Sry for my bad english

 

 

Thx

 

Have you included > CARDINFO.cif

Link to post
Share on other sites
  • Replies 788
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

 

Hi there,

 

I can confirm this works on the F30BT.

 

As per above, the process I followed was:

 

1. Run 'supertestmode' from a freshly formatted (FAT32) SD card.

2. Copy RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL to SD root.

3. Remove SD card from AVIC and edit RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL as per monsterF9's guidance on a PC.

4. Insert SD card with edited RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL back into AVIC.

5. Delete RenewallFLib.dll from USER\PRG0\APL and USER\PRG1\APL on AVIC.

6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL and USER\PRG1\APL.

7. Remove SD card format it and copy Update, FIRMWARE and CARDINFO.cif onto it.

8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD

9. Sit back and wait for 25 minutes whilst the unit updates.

 

I needed to edit RenewallFlib.dll from  USER\PRG1\APL.

 

By the way, NAVI.exe from 2013 for skip warning works fine in 2015 as well. Only remove NAVI.exe from USER\PRG0\APL in your 2015 version and copy the NAVI.exe (pionnara mod version for 2013 version).

 

Thanks for support.

 

If there any questions, feel free to tell me ;)

 

BT,

 

Daniel

 

I followed the above process, I downloaded the map files from here> https://docs.google.com/uc?id=0B3I8g0z3jQBJT3k1RGVsU0QtY3M&export=downloadand I used http://mh-nexus.de/en/downloads.php?product=HxD for the Hex editiing all worked fine

Link to post
Share on other sites

During the process of copying the RenewallFlib.dll from USER\PRG0\APL, I somehow managed it to delete it from the unit. But I did manage to make a copy of the file from USER\PRG1\APL. Is this the same file? So when I edit the extracted file, can I copy the same file back to PRG0 and PRG1? Or are they two different files in the first place?

 

If so, how can I get my RenewallFlib.dll from USER\PRG0\APL back?

 

edit: unit is a F840BT

Link to post
Share on other sites

 

Confirmed update from 5.0 to 6.0 on F9220
 
Apply these changes to your RenewallFlib.dll on your Unit:
 
Offset 000019F0:  0350A0E3 replace with 0050A0E3
Offset 00001A10:  0350A0E3 replace with 0050A0E3
Offset 00001AD8:  0350A0E3 replace with 0050A0E3
Offset 00001C1C:  0250A0E3 replace with 0050A0E3
Offset 00001C24:  0150A0E3 replace with 0050A0E3
Offset 00001A3C:  0350A0E3 replace with 0050A0E3
 
Users with units older than F30BT will have to use cardinfo from this post:
 

 

I'm trying to edit the RenewellFlib.dll that I extracted from USER\PRG0\APL, but the only values from monsterF9's post that I can find are at Offset 000019F0 and Offset 00001A10. Do I have to replace only these two?

 

Could someone upload they're working version of the RenewellFlib.dll for a F940/F840?

Link to post
Share on other sites

@PatrickPR: as i explained every unit has its own dll. It´s unique to every serial number and i think this is the reason why you normaly have to enter your serial number to get the password for the buyed version of the update,

You could use my script to patch your dll.

 

@sstroehl: if i correctly remember it´s not the same version. Because there is only  1 prg folder active. in the each prgfolder is a EU090APL.HTM file. copy this file form the Avic a take a look at these file. If you have the 2013 Version installed

there have to be a line like "Release Version : 5.000000". If its 5.0000 then this is the folder where you have to patch the dll. if you look to the other prg folder there should be the same file bur with realease version 4.0000. After the update the release version is 6.0000. you also should use the cardinfo.cif which is in the download package from flomsen or bolle.

Link to post
Share on other sites

I'm trying to edit the RenewellFlib.dll that I extracted from USER\PRG0\APL, but the only values from monsterF9's post that I can find are at Offset 000019F0 and Offset 00001A10. Do I have to replace only these two?

 

Could someone upload they're working version of the RenewellFlib.dll for a F940/F840?

00001AD8 is found by locating 00001AD0 move along to column 08 then change the values there. 

 

Each of the offsets end with the column number

Offset 00001C1C:  0250A0E3 replace with 0050A0E3            column 0C

Offset 00001C24:  0150A0E3 replace with 0050A0E3             column 04
Offset 00001A3C:  0350A0E3 replace with 0050A0E3            column 0C
Link to post
Share on other sites

Hi there,

I can confirm this works on the F30BT.

As per above, the process I followed was:

1. Run 'supertestmode' from a freshly formatted (FAT32) SD card.

2. Copy RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL to SD root.

3. Remove SD card from AVIC and edit RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL as per monsterF9's guidance on a PC.

4. Insert SD card with edited RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL back into AVIC.

5. Delete RenewallFLib.dll from USER\PRG0\APL and USER\PRG1\APL on AVIC.

6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL and USER\PRG1\APL.

7. Remove SD card format it and copy Update, FIRMWARE and CARDINFO.cif onto it.

8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD

9. Sit back and wait for 25 minutes whilst the unit updates.

I needed to edit RenewallFlib.dll from USER\PRG1\APL.

By the way, NAVI.exe from 2013 for skip warning works fine in 2015 as well. Only remove NAVI.exe from USER\PRG0\APL in your 2015 version and copy the NAVI.exe (pionnara mod version for 2013 version).

Thanks for support.

If there any questions, feel free to tell me ;)

BT,

Daniel

 

Updating F940BT RIGHT NOW

 

i moodified both RenewallFlib.dll and it accepted the Password. Its right now on 27% updating...

i will be updating this post for more informations....

 

56% -----> 80%

 

Confirmed update on F940BT with this tutorial...

For questions in: Portuguese, German and English, send me a PVT

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...