SimpleStrategy Posted December 17, 2015 Report Share Posted December 17, 2015 My AVIC D3 unit has been installed in my 2006 Kia Sorento. When i either shift into reverse, I get a screen that says the image may be reversed instead of getting any video from the camera. I checked connections to the back of the D3. There appears to be good. Power, ground and video connections all seem good. How can i test to see of the camera is blown? I suspect this is the problem. But i test another camera and i get same problem. Would like to know for sure before i go ahead and order a new one. Thanks. Quote Link to post Share on other sites
codmyster Posted July 11, 2018 Report Share Posted July 11, 2018 did you make sure you have to tell it a positive or neg switch type how ever its hooked up and make sure in your system setting you will see polarity + or - so make sure how ever yours is connected its on the correct settings!!!! hope this helps GOD BLESS Codmyster Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.